Used Tool Rack for sale (40,223)

Condition: excellent (used), Year of construction: 1996, operating hours: 73 h, Complete equipment for orbital welding and bevelling of pipes in all kinds of materials and all kinds of thicknesses in diameter from 20 to 170mm for sale. Manuals and part lists are included. In addition to welding equipment, a TRI-Tool 206B and a Wachs SDB 103/3 bevelling machine are included. They will efficiently make all kinds of joints like V, J or U bevels. The equipment can be delivered free of charge "to the door" anywhere in Europa and up to 1 week of training is included. All three included welding heads are of the same type (original Dimetrics FFIP heads- Full Function In Place) with both oscillation and AVC. (Automatic arc length) All three welding heads each have their own feeder for 100mm wire spools. The equipment consists of the following: *1 pc Dimetric Gold Track 3 (hour meter shows 72.6 hours "weld time" and 1088 hours "stand by" *1 pc welding head FFIP Small for Ø20- Ø 50mm *1 pc ditto but Medium, for Ø 48 – 90mm *1 pc ditto but Large, for 100-170 mm Completely ready to weld with all cables and remote control The welding heads are in solid transport boxes. Furthermore; *1 case with Tri-Tool 206 B bevelling machine pneumatic drive, 2"-6" •very little used • Bevel pipes from 2" to 6" (60.3 to 168.28mm) • Wall thickness up to 22.23mm) Gbodpfxoycvifo Aa Aek *1 case with Wachs SDB 103/3 pneumatic drive Capacity from 1" to 3'" well used but in good working condition. Dimetric's equipment has welded approximately 70% of the world's nuclear power plants, - both due to precision, operational reliability and robustness. Dimetrics was also the first to be certified to weld hydraulic systems on aircraft. Dimetrics (now together with Canadian Liburdi) is still a leader in welding nuclear power plants. For example, "Framatome" is responsible for the construction of 13 new nuclear power plants in France - and they only use welding equipment from Liburdi - Dimetrics, now Gold Track 7. All welding heads can still run on the latest Dimetrics welding machines. My equipment is from the 90s, and I got it from a shipyard that had produced nuclear-powered submarines where this particular equipment was on standby, but was never used for anything other than testing and training. A new piece of equipment with only one welding head and the same functions (AVC and oscillation) quickly costs from the very cheapest some €75.000 and up- of course without bevelling machines. I bought the equipment for use on a job that never materialised (!), and because I had 4 other orbital machines from before, this was rarely used. Now I am stopping working with orbital welding after 50 years in the industry, and continue as a consultant and supplier. This gives me time to load the equipment into a cabinet trailer, connect it to my camper and deliver it anywhere. Price complete delivered anywhere in Europe, including up to 1 week of training, €20000 excl. VAT.

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 throat depth: 160 mm Gbjdpfx Ajdz Sp Hea Ajk Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: not inspected (used), functionality: unexamined, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Auction of four driven tool holders! TECHNICAL DETAILS Max. speed: 6,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 550 x 300 x 80 mm Gedoynapyepfx Aa Aobk Weight: 70 kg External reference: Pieper – Lot 134

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10686/11:02, overall weight: 15 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Speed: 12,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 260 x 200 x 130 mm Weight: 15 kg Godpfx Aajyn Af Rj Aobk External reference: Pieper - Lot 16

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Mount 1 Manufacturer: EPPINGER Type: PRECI-FLEX Serial number: 5942-10 Speed: 4,000 rpm Mount 2 Serial number: 10686/11:01 MACHINE DETAILS Gjdpfx Aeynkq Uea Aebk Dimensions & Weight Dimensions (L x W x H): 300 x 200 x 120 mm Machine weight: 50 kg External reference: Pieper - Lot 17

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting Gjdpfxewg Rv No Aa Asbk 8 x turning tool holders 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Gbodpfxsyzt Nze Aa Ajk

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Gsdpfew Humlex Aa Asbk Brand: PWB Swiss Model: Tool Master 310

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven In good working condition Gbedpjyw T D Defx Aa Aek

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Gsdpfx Asx Emd Tsa Asbk Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Gsdpfx Asx Emfkoa Aobk Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread Gsdpfx Aasx Hgmws Aobk

Condition: excellent (used), Year of construction: 2010, Tool-Temp Gedpfoyzg Svox Aa Aebk Type: TT-180 Year of manufacture: 2010

Condition: excellent (used), Year of construction: 2015, Tool-Temp Type: TT-181 Year of manufacture: 2015 Connected load: 9.85 kW Weight: 55 kg Gsdpfeyzg E Nsx Aa Ajbk

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Gbsdpfsyzga Tsx Aa Aek

Condition: excellent (used), Year of construction: 2014, Tool-Temp TT-180C Year of manufacture: 2014 Connected load: 9.85 kW Godpfeyzf Uvsx Aa Aobk Weight: 55 kg

Condition: excellent (used), For sale: Professional CNC tool measuring and presetting device by PWB Systems AG Switzerland. The presetter is used for precise setting of tool length and diameter before mounting in the CNC machine. This reduces machine setup time and increases machining accuracy. The device is equipped with a SMART optical system with a camera, enabling accurate measurement of the tool edge. Gjdpsyuqu Tefx Aa Asbk Swiss-made equipment – very robust and precise construction. ⸻ Technical specifications • Manufacturer: PWB Systems AG – Switzerland • Model: Tool Master ER10 • Optical system: SMART camera • Measurement: Z / tool length • Digital display with control keyboard • Tool holder • Solid construction

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case Gbjdpfeyc Ig Ajx Aa Ask • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: used, diameter div. Gbedpfxswpw E As Aa Aek number 75x tool adaptor SK 40

Condition: used, functionality: fully functional, The temperature control units – 4 units from Tool Temp with MP-888 controller – are available for sale, equipped with the following specifications: Medium: Water, up to max. 90°C Heating capacity: 3 kW & 6 kW = 9 kW, with adjustable stages Cooling capacity: 35 kW Pump capacity: 75 l/min, max: 4.5 bar Filling volume: 6 litres Gbjdpfxex Elbqs Aa Aek Weight: 55 kg Dimensions: 670 mm x 260 mm x 650 mm

Condition: good (used), Technical Data for Pallet Rack Beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0440 Connector: 4 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg (with evenly distributed load) 02x Safety pins, used Finish: fully galvanized For securing the beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Godoykamdspfx Aa Aebk General information about this item: This item is only offered for collection. Transport or shipping of this item is subject to additional charges, which depend on the delivery location and/or scope of delivery and can be requested from us separately.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Gbedpfx Aexnizdea Aek Energy Efficiency: Equipped with energy-efficient drives.

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Gbedpjvzb Nqjfx Aa Aok Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: used, Manufacturer: TOOL TEMP Gbsdpfxoylaats Aa Aok

Condition: new, Year of construction: 2026, For sale: the extremely robust pneumatic post drivers from Rhino Tool, USA. Previously sold on the European markets as RAKL, particularly in Germany. This indestructible machine is available in 4 models: PD55 25 kg PD110 50 kg PD140 63 kg PD200-5" 77 kg Gjdow R U Ehepfx Aa Asbk PD200-7" 80 kg All options such as special adapters/inserts, pneumatic centres, and grippers are available from stock.