Used Optical Dividing Head for sale (16,572)

Condition: good (used), Optical dividing head, precision dividing head -Max. tip height: 76 mm Ijdpfx Asb A Iqbegzstr -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm -wooden box -Total weight per box: 42 kg Quantity: 1 piece available

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Ijdpfjb Ez R Uex Agzstr Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: good (used), Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder Itjdjb E Aquepfx Agzor Accessories: for tool grinding machine -Recording: MK5 -Peak height: mm -swivel/rotatable/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg

Condition: reconditioned (used), Year of construction: 2005, NC indexing head Hofmann RWNC 160 Center height: 160 mm Itsdpjwtfpdofx Agzjr With tailstock

Condition: like new (used), Year of construction: 2020, CNC-4 axis dividing head for CNC BAZ - CNC milling machine Fabr.HOFMANN Type : HOWIMAT CNC 160.2 / Z - LEAN Bj.2020 Mint condition Only test run . Control Hofmann CPS 20 Spindle bore : 80 mm Chuck Röhm ZS 160 . Itsdpfxsu Et Sco Agzor Documentation available . More data pull data sheets .

Condition: good (used), Internal item no.: 25095 Itodpfxex Dl Ekj Agzsr Universal Dividing Head Walther UTA 100 E The dividing head comes from a training workshop and is in well-maintained condition. + Three-jaw chuck (D125) + Tailstock (center height: 100 mm) + Change gears + Indexing plates 16/27/30/33/41/47/53/61 22/24/29/36/37/49/57/63 23/25/28/31/39/43/51/59 Dimensions: (LxWxH) 430 x 360 x 200 mm Weight: approx. 30 kg

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) Ijdpstrnndefx Agzstr direct and indirect dividing center height 125 mm Can be used horizontally and vertically Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: good (used), Dividing head Make: unknown Chuck: 160 mm 3-jaw chuck Center height: mm Footprint: 220 x 260 mm Perforated disk: 220 mm Pitch: 46; 47; 49; 51; 53; 54; 57; 58; 59; 62; 66 Dimensions: 500 x 500 x 250 mm Iodsva D Nqjpfx Agzjtr Weight: 76 kg

Condition: excellent (used), Professional measuring instrument with two sliding spindles terminated with cones. Enables precise positioning of a component for checking runout, straightness, or concentricity. Specification (approximate): Working length between centers: about 300 mm Iodow Rkqtjpfx Agzjtr Base length: about 380 mm Spindles with sliding and locking capability High-precision industrial construction Universal application for measurement or workshop use Condition: Very good technical and visual condition The instrument is ready for operation

Condition: good (used), Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm Ijdpfxsxfhche Agzetr -Weight: 21.6 kg

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken Ijdpfxjxcbp Nj Agzstr - Swivel mechanism is stiff

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered Isdpewmd Irefx Agzetr - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: used, machine/vehicle number: 2502, DESCRIPTION Dividing head make Walter Type HT 200 U Tip height 200 mm Recording SK 50 Ijdpfsc Tuyrox Agzetr Spindle diameter 130 mm Weight 260 kg Space required: T. 500 x B. 650 x H. 450 mm DMT0Z2OCZN9

Condition: used, centre height 90 mm spindle culvert in tie rod 25 mm transmission 40 : 1 weight approx. 41 kg   Itodpevimwpofx Agzer

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros Ijdpfod Erdrox Agzotr # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: used, machine/vehicle number: 2032, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Iodped Ebp Hsfx Agzetr -Accessories for: dividing head -with: hand crank -Dimensions: 390/400/H200 mm -Weight: 28 kg

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Table size: 145 x 145 mm Construction height: 62 mm Itjdpow E Nw Ajfx Agzsr Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Rotary table: Ø 74 mm Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, overall weight: 21 kg, center height: 125 mm, path measurement accuracy: 3 mm, Manual indexing head with SK 50 mount and infinitely variable radial adjustment. Itjdpjwmdt Iefx Agzer - Reducing sleeve to MT 5 - With multiple indexing disks - Hydraulic expansion chuck SK 50/32 - Precise concentricity, less than 5 µm - Center height 125 mm New price with accessories: €7,000

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Depth: 300 mm Height: 260 mm Weight: 60 kg Iedpfx Asv S Ar Iegzotr

Condition: good (used), Dividing head Brand: presumably WMW Chuck flange: 162 mm Flange step: 102 mm Mounting: short taper 85 mm Indexing plate diameter: 170 mm Division holes: 31 / 33 / 37 / 39 / 41 / 43 / 47 / 49 / 53 Base area: 240 x 175 mm Isdpfxewy Hlmo Agzstr Accessories: Dimensions: 360 x 300 x 360 mm Weight of dividing head: 43 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe Iodpfxowag Uhs Agzotr -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Condition: good (used), Dividing head Iedpfx Agswy Hlgszjtr Brand: presumably WMW Spindle taper: MK 3 – drawbar required Indexing plate diameter: 170 mm Hole division: 15 7 16 7 17 / 18 / 19 / 21 / 23 / 27 Mounting surface: 235 x 185 mm Accessories: Dimensions: 340 x 280 x 350 mm Weight dividing head: 39 kg

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank Itedpfxofk Affj Agzor -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

Condition: good (used), Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 Isdpfjf S Nc Eex Agzotr -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg Itodpfocht Uvex Agzjr