Used dividing heads for sale (131)

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm Iaedjd Efz Sepfx Aiksw -Weight: 4.7 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Isdpfxsb Hbx Ue Aikoaw -Tip height: 89 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/110/H110 mm -Weight: 5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm Isdpod Inw Hefx Aiksaw -Weight: 65.5 kg

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg Iodpfscht Uvex Aikeaw

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Iedpohinzhjfx Aikoaw -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Iaedpfjd Ar Uxsx Aikew -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Iaedpfx Aijd Hvhrjkjw -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm Iajdpfx Aodzzg Ssiksw -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Admission: Iedjd Ebpkspfx Aikjaw -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Iaodpfxod Nn Ifj Aikjw -Tip height: 185 mm -Dimensions: 235/120/H170 mm -Weight: 32 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Iaedpfed N Apqex Aikjw -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm Iaedpfjc Ih Swsx Aiksw -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling Iasdpfx Aijd Ar U Esksw -Dimensions: 250/230/H300 mm -Weight: 23 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 Iaedpfx Aiod D Nfgeksw -Dimensions: 275/260/H265 mm -Weight: 23 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg Ijdpfx Asd N Apneikeaw

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Ijdpfshikzlex Aikjaw -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: good (used), Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder Accessories: for tool grinding machine -Recording: MK5 Isdpfx Aeb E Aqusiksaw -Peak height: mm -swivel/rotatable/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg

Condition: good (used), Year of construction: 2006, Manufacturer: CNC Fritz Werner FP4 V2 Iodpfx Aozlh R Seikjaw Machine type: Double-head milling machine for processing blocks Year of manufacture: 1983 / Overhauled in 2006 Travel distances X: 1,700 mm Travel distances Y: 720 mm Travel distances Z: 2 × 280 mm Spindle power: 2 × 30 kW Control system: Siemens Sinumerik 810M Power supply: 500 V, 50/60 Hz Condition: Good, in use until today.

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm Ijdpfov S Ar Isx Aikeaw (28604) Stock number Length: 470 mm Depth: 300 mm Height: 260 mm Weight: 60 kg

Condition: good (used), Dividing head Ijdowy Hlgopfx Aikjaw Brand: presumably WMW Spindle taper: MK 3 – drawbar required Indexing plate diameter: 170 mm Hole division: 15 7 16 7 17 / 18 / 19 / 21 / 23 / 27 Mounting surface: 235 x 185 mm Accessories: Dimensions: 340 x 280 x 350 mm Weight dividing head: 39 kg

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR Iasdpezcq Hxofx Aikew

Condition: used, / weight 140 kg dimension Iodpfxjzcq Hlo Aiksaw Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg

Condition: new, centre height // mm Iasdpfxjzcgfqs Aiksw total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: used, centre height 160 mm chucking diameter 200 mm hollow 54 mm Iodpfx Ajzcgb Sjikjaw

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. Iajdpfxjbatame Aikow The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.