Used Gunther Splitter for sale (167)

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Gjdpfx Asy N Rlvekysuc The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm Gusdpfxewhza Uo Akysc - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, functionality: fully functional, Gunther PI 72 M Injector The 72-needle brine injector from Gunther is ideally suited for medium to large-scale production. The individually spring-loaded needles, combined with independent valve control and a symmetrical needle pattern, ensure optimal injection performance. The user-friendly touch-button control panel allows you to store up to 20 programs. This machine is designed for injecting boneless meat. The injection pressure can be continuously adjusted between 1 and 4 bar, and the conveyor speed is infinitely variable. The machine is equipped with an external mobile filtration unit. This brine injector is constructed entirely from stainless steel. Specifications: - Production capacity: 33 cycles/min - Number of needles: 72 needles - Needle diameter: 4 mm - Injection pressure: 1–4 bar - Conveyor speed: infinitely adjustable (90 mm/cycle) Guedpjzc Uz Hjfx Akyoc - Product opening (W × H): 455 × 210 mm - Voltage: 400 V (3+N, 50 Hz) - Power: 8.61 kW - Weight: 1,035 kg - Machine dimensions (W × D × H): 2,450 × 1,300 × 2,300 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Godpfxjy Uwr Tj Akyouc Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute Gusdjwhy T Tjpfx Akysc - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Manufacturer Günther Model DP15/10 10 sections With cable PRICE REDUCTION FROM 1,250 TO 1,000 EUR!!! Gjdpfx Aswqgxhekyeuc

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Idler bearing: Maintenance-free Gedju S Adropfx Akyouc Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle

Condition: good (used), Günther Pekel injector Gujdpoy Hx A Dsfx Akyec 380V.

Condition: excellent (used), functionality: fully functional, Brine Injector Günther Type PI 26 M [PI 345-26] + Filter System GRF 200 K - MC control with 20 program memory slots for recipe management - Continuously variable needle bar speed - Continuously adjustable pressure / pump speed - Stainless steel centrifugal pump Guodpfxeyzb Tze Akyec - Günther GRF 200 K filter system on wheels – stainless steel - Conveyor belt – stepless adjustment – removable - Completely stainless steel construction - Condition: As new!!!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input current: 16 A, Steaker, fully operational and functional with a feed belt. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Guedpjyzw Ibjfx Akysc

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Gedpfx Asxx Tmrjkysuc Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) Gujdpfx Aoxx Ti Tskyjc LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. In good condition, 380V, 16A. Further details on request. Cash payment or advance payment. Guodpfew R Tv Sjx Akyjc Sale to commercial customers only. No warranty, no liability.

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Guodsv Saflepfx Akyec Cash payment or advance payment. Sale to businesses only. No guarantee or warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H106-000-000, conveyor belt width: 800 mm, conveyor belt speed: 1,400 mm/s, total width: 1,066 mm, power: 3 kW (4.08 HP), axle spacing: 5,300 mm, construction width: 1,066 mm, Axle distance: 5,300 mm Belt width: 800 mm Construction width: 1,066 mm Side plate height: 270 mm Conveying speed: 1.4 m/s Belt quality: EP 400/3 3:1.5 mm Standard quality Profiling: steep conveyor belt, PB 550 mm / PH 17 mm Drive: drum motor, Van der Graaf brand Power: 3.0 kW Motor protection class/Efficiency class: IP 66 / ISO F Drive drum: Ø 215 mm (drum motor) Gsdeyh Aqkepfx Akyeuc Lagging: metallic surface Return drum: Ø 190 mm, crowned Bearing: maintenance-free tensioning bearing Ø50 mm Carrying rollers: Ø 63.5 mm with buffer rings Carrying roller interval: 600 mm Carrying roller bearing: maintenance-free Return rollers: 2 pieces Ø 89 mm Side guide rollers: 2 pieces Ø 50 mm, L = 120 mm Tensioning station: threaded spindle M16 Special design: transfer chute, free discharge

Condition: used, Injector Godpfjyab Dcox Akyjuc Electric power: 5.5kW Dimensions: 80x160x240cm

Condition: used, functionality: fully functional, Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Gjdpewd I E Aefx Akyjuc Electric power: 3.5kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Gjdeu T Ewwspfx Akyouc Conveyor speed: 1.0 m/s Belt quality: EP 400/3 4:2.0 mm normal quality Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt price: 1.850 Euro contact: Mr. Rainer Eckerle Godpfsh Uucfjx Akyjuc

Condition: used, Tumbler with cooling system Manufacturer: Gunther Guedpfstrgunsx Akyjc Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Current: 16 A Gjdpfx Aksw Ra Rpsyouc Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Gjdpfx Ajui Iylekyjuc Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Gusdpfoyibhqsx Akysc Easy to clean

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Guodpfx Akshkz Hmsyoc Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Guodpfjvbdyxsx Akyec Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*