Hot runner unit - PRICE REDUCTION!

Günther DP15/10

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Fedpfxeuk I Ets Ahnsph

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control Fpjdpfjddv Itex Ahnsh -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive Fodpfx Asd Tidxjhnsph fitted with Super Grip Adjustable discharge chute

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Fodpfxoh Nyp Us Ahnjph Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminium flat belt conveyor without substructure conveyor belt length: 6000mm drive roller: knurled deflecting roller: crowned PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats (61 pcs) - 200mm pitch * antistatic due to threads in the fabric of the running side Fedog D T N Hopfx Ahnoph endless welded with stepped finger joint food certificate is included V2A stainless steel underlay plate full surface drive: motor approx. 1,1KW - horizontally lying * optionally controllable with frequency converter connection 220/

Year of construction: 2004, condition: ready for operation (used), Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects. Fpedpeu Av Hdofx Ahneh

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, displacement volume: 1,657 cm³, mold height (min.): 300 mm, ejector stroke: 250 mm, Equipment: documentation/manual, Machine in very good shape. Hopper drier, hopper loader and 3 axis robot included in the price. Fedpfx Aswf Upwshnoph Price can drop if the machine is purchased without them. Still in production and available for inspection. Price loaded on truck.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: Fpedpfxsu Ti Tve Ahneh MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Fsdpfx Ahsxq Hckjnsph Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, screw diameter: 36 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz Fpedex S Slcjpfx Ahnoh • selection unit: no • beam spacing: 560 x 510 • single platen: yes • Optional: Wittmann Handling