Dry Air Generator

Piovan DPM604

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Designed to accumulate mash before the packaging operation. The accumulation option allows the entire line to run continuously without stopping, independently of the packaging machine. Fgsdjiu Hy Tepfx Al Ujh - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 Stainless steel - Weight: 60 kg - With floating lid - With level indicator Dimensions: D - diameter: 565 mm H - total height: 1095 mm h1 - tank height without legs: 845 mm h2 - height of legs: 250 mm

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Fgjdpfxok Rnq Nj Al Ujh Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) Fjdpfx Alsf A Nq Ao Ujgh • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Fodpfjpu R Ncex Al Ujgh Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Fgsdpfx Aloxr Hgxs Ush Year: 2023, never used, still in its original packaging.

Condition: like new (used), Year of construction: 2025, container length: 20 ft, color: grey-black, overall weight: 30,480 kg, maximum load weight: 27,380 kg, empty load weight: 3,100 kg, loading space volume: 31 m³, loading space width: 2,350 mm, loading space length: 5,898 mm, loading space height: 2,390 mm, 20' Open Side (Side Door) Shipping Container - Condition: ONE WAY - used once for sea freight with cargo - Exterior color: RAL7016 Anthracite gray - Weatherproof and waterproof - With valid CSC plate (for 5 years) - Cargo worthy - Available from depot in Hamburg / Delivery at extra cost OTHER COLORS: RAL5010 Gentian blue, RAL7035 Light gray CONTAINER CONSTRUCTION: - Double-leaf door with all-round rubber seal on the end face - Fully opening folding door on the long side - 12 x galvanized door locking bars - Walls made of corrugated steel sheet, 2 mm thick - 2x ventilation openings on the side walls - Floor made of coated plywood, 28 mm thick - Forklift pockets / spacing = 2055 mm - Built according to ISO standard CONTAINER DIMENSIONS: - External dimensions (L x W x H): 6,058 x 2,438 x 2,591 mm - Internal dimensions (L x W x H): 5,898 x 2,350 x 2,390 mm - Door opening (W x H): Width: 5,702 mm x Height: 2,154 mm - Volume: 31.1 m³ - Tare weight: 3,100 kg - Payload: 27,380 kg CONTAINER APPLICATIONS: - Additional storage capacity - Storage of materials and tools - Temporary storage during relocation - Transport container - Showrooms - Living container - Recreation rooms - Mobile kitchens + bars - Workshops - Technical rooms - and more OUR SERVICES: - Container sales: All sizes + types / New + used - Europe-wide delivery by truck / side loader / rail / inland vessel - Container repair - Container modification - Accessories + spare parts for containers PAYMENT TERMS: Prepayment: The invoice amount must be fully transferred to the specified bank account before delivery or service provision. The order will be processed after payment is received. Payment by bank transfer: The invoice amounts must be transferred to the specified bank account within 7 days after the invoice date. Payment by PayPal: PayPal payments are possible, subject to an additional PayPal fee of 2.49 percent. FURTHER INFORMATION: Invoice with VAT shown (19%). The containers are located in an empty depot in the port of Hamburg. We distribute many other new + used containers of all types + sizes. We will gladly create a free, no-obligation quote for containers including delivery and any unloading. Fgedpegp Alhsfx Al Ush CONTACT US: We are always available to answer your questions! Container trade, shipping container, storage container, overseas container, deep-sea container, material container, warehouse container, construction site container, construction container, steel container, bar container, kiosk container, workshop container, event container, relocation container, archive container, freight container

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection Fgjdpfjg Ey Ufex Al Ueh *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 33.8 kW (45.96 HP), type of input current: three-phase, type of cooling: air, overall weight: 460 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,600 mm, total height: 1,570 mm, warranty duration: 6 months, Aircooled chiller RHOSS TCAEY133 33.8 kW Cooling capacity: 33.8 kW / 9.61 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Panasonic C-SCP510H38B (scroll) Type of refrigerant: R410A Fgsdpewd R Rnjfx Al Ueh Number of fans: 1 pcs. Dimensions: 1.6x1x1.57 m. Weight: 460 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, diameter 200 mm Fodpfxjhuxbrs Al Uegh height 105 mm weight of the machine ca. 25 kg dimensions of the machine ca. 400 x 280x 150 m

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW Fsdjfnvwqopfx Al Ujgh (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.