Used Splitter for sale (154)

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 Rsdpfx Ajttgy Hog Ijp E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Rodpfx Aown D Izeg Isp Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. Rodpfxeiqi S Ne Ag Iep 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Rjdjl Sli Dopfx Ag Iep

Condition: used, mileage: 208,496 km, power: 205 kW (278.72 HP), first registration: 11/1999, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro2, loading space length: 3,960 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, Equipment: - All-wheel drive with locking differentials - S cab - 6-speed manual transmission with splitter - 40 mm towing jaw hitch - Rear hydraulic connections - Air conditioning - ABS - Roof hatch - Sun visor - Driver comfort seat with seat heating - Electric windows - Roof hatch - Sun visor - Engine brake - HJS retrofit diesel particulate filter Body/Crane: - Meiller 3-way tipper body - Atlas 105.1 crane - Year of manufacture: 2001 - 2-point outriggers - Emergency stop - 5th and 6th control circuit - High stand controls Lifting capacity/outreach: Rjdpfx Agjx Dph No Iep - Max: 5,050 kg Hydraulic outreach: - 2,900 kg at 3.00 m - 1,940 kg at 5.50 m - 1,490 kg at 7.10 m Mechanical outreach: - 1,170 kg at 8.80 m Other: - German first delivery - 2 previous owners - Payload: 7,660 kg according to registration certificate Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke continually stocks around 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. On request, we will be happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops. Our offers are generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is available through our external partners at an additional cost. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment features may need to be verified separately. Subject to prior sale and errors.

Condition: used, mileage: 208,496 km, power: 205 kW (278.72 HP), first registration: 11/1999, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro2, loading space length: 3,960 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, Equipment: - All-wheel drive with locking differentials - S cab - 6-speed manual transmission with splitter - 40 mm towing jaw hitch - Rear hydraulic connections - Air conditioning - ABS - Roof hatch - Sun visor - Driver comfort seat with seat heating - Electric windows - Roof hatch - Sun visor - Engine brake - HJS retrofit diesel particulate filter Body/Crane: - Meiller 3-way tipper body - Atlas 105.1 crane - Year of manufacture: 2001 - 2-point outriggers - Emergency stop - 5th and 6th control circuit - High stand controls Lifting capacity/outreach: - Max: 5,050 kg Hydraulic outreach: - 2,900 kg at 3.00 m - 1,940 kg at 5.50 m - 1,490 kg at 7.10 m Mechanical outreach: - 1,170 kg at 8.80 m Other: - German first delivery - 2 previous owners - Payload: 7,660 kg according to registration certificate Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke continually stocks around 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. On request, we will be happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops. Our offers are generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is available through our external partners at an additional cost. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment features may need to be verified separately. Subject to prior sale and errors. Rjdpfx Aexk Ucfog Iep

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 125 mm suction socket 2 x Ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Table milling machine with one-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Positioning control for height and swivel adjustment with zeroing of the height and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Rjdpfxofpb Nms Ag Iep Push button for spindle start and stop Left and right rotation Cutter quick clamping device Fine planed cast iron table with rigid frame support Control panel at the bottom of rigid frame support Milling stop 216 total adjustment via handwheel and LCD display incl. cast stop plates and aluminium splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, not exchangeable CE-conform GS tested

Condition: used, mileage: 358,042 km, power: 250 kW (339.91 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 9,845 kg, maximum load weight: 8,155 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: other, number of seats: 2, loading space length: 6,400 mm, loading space width: 2,480 mm, loading space height: 800 mm, operating hours: 19,820 h, number of beds: 1, Equipment: ABS, air conditioning, cabin, crane, cruise control, parking heater, soot filter, trailer coupling, - TGM 18.340 PK 12002 EH remote-controlled loading crane, immediately available! - Cab currently in light blue, can be repainted in your preferred RAL color on request - First registration: 17.12.2013 - Mileage: 358,042 km - Manual transmission - 8-speed gearbox with splitter - Sleeper cab - Air conditioning - Heated seats - Auxiliary heater - Electric sunroof - Air compressor horn - Original MAN refrigerator box - Air blow gun - Tires: Goodyear 315/70R22.5 - Spare wheel - Storage box - 2x 300L fuel tanks - Work lights - 2x rear lights - 1x crane light - Flatbed platform: - Length: 6.40 m, Height: 0.80 m, Width: 2.48 m Rjdpexv Db Ujfx Ag Isp - Bulkhead height: 1.53 m - 6 load securing lashing eyes per side - 4 divided drop sides, each with 2 folding steps - 2 folding steps at the rear - Palfinger PK 12002 EH remote-controlled loading crane - Radio remote control - Operating hours: 1,982 - Subject to errors and prior sale ... Air conditioning, climate control, heated front seats, VAT deductible, ABS, multifunction steering wheel, hands-free telephone, cruise control, cool box, trailer coupling, power steering, spare wheel, sleeper cab, bunk, auxiliary heater, seat heating, work spotlights, crane, previous owners: 2, Emission class (commercial vehicle): 81 Euro 4, diesel, rear-wheel drive, hydraulics, sleeping berths: 1, particulate filter, main and exhaust inspection renewed before sale, parking air conditioning, particulate sticker: 4 (green), hands-free system

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Redpfx Ajpz I Nnog Iep Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword Rodpfxopz I I Aj Ag Iop - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: good (used), power: 0.018 kW (0.02 HP), travel distance X-axis: 2,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 15,000 kg, table length: 2,600 mm, table width: 850 mm, spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, CHARACTERISTICS Table; 2600 x 850 mm X-axis travel; 2200 mm Y-axis travel; 800 mm Z-axis travel; 800 mm Spindle RPM; 8,000 Control; Fagor 8055 - MC Motor power; 15/18,5 Kw Magazine tool capacity; 40 Redpor I Aumefx Ag Ijp Tool; BT 40 Fourth spindle (IRTS splitter); 350 ⌀ mm Electronic handwheel Cooling through the tool Chip extractor Air cooling Dimensions with extractor (width x length x height); 4029 x 7050 x 3100 Weight; 15,000 kg

Year of construction: 1991, condition: good (used), functionality: fully functional, Newly sharpened knives! TECHNICAL DETAILS Rsdjizwrpjpfx Ag Iep Cutting length: 3.100 mm Max. Sheet thickness (steel): 13 mm Overhang in the side stand: 75 mm Cutting angle: 0,5 - 4°. Engine power: 18,5 kW MACHINE DETAILS dimensions: 4.200 x 2.700 x 2.010 mm Weight: 10.800 kg EQUIPMENT - splitter guide - with backgauge operable from the front with mech. counter 1.200 mm range - stepless centrally adjustable cutting gap setting by means of handwheel - cutting line illumination - 2 support arms - foot pedal - balls in table - single and continuous stroke (with adjustable delay time) - sensitive aut. cutting length adjustment - push-through time adjustable up to 2 s - 15 pieces hydraulic hold downs - operating instructions in german width for transport with dismounted backgauge 1.750 mm

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors Rjdpfxev Hm T So Ag Iep - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814----Exterior Equipment: Galvanized frame * Neutral sliding tarpaulins without lettering/stickers * Additional tarpaulin tensioners at the front * Steel corner supports at the front and rear * Schmitz Safety Roof (Edscha) sliding roof * Lifting roof with stanchion lift * Body height adjustable at the front 7 x 50mm / rear 4 x 50mm * Ferry equipment - solo/unaccompanied transport * Reinforced HD frame at the front * Bolted-on underrun protection, FERRY-type version with skids * Smart Board trailer information system with axle load indicator * Tarpaulin rope Redpfx Agswibi Sj Iep * Steel impact protection at the rear * Document box ----* Technology: * Rotos axles with disc brakes * Air suspension with splitter on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11 2nd axle: 8/8 3rd axle: 7/7 * Lashing holes in the outer frame * 7 pairs of 2-ton lashing eyes and 11 pairs of 5-ton lashing eyes * Pallet stops on both sides * Load securing certificate EN 12642 Code XL, Daimler 9.5, Beverages * Reinforced cargo area floor * Ex approval * Unladen weight 6,648 kg * Fifth wheel height 925 mm * TÜV HU: 12/25 SP: * Hire-purchase example: €279 monthly installment, 48-month term, 10% down payment (can also be your used vehicle) and 10% final payment. * Delivery to your location possible. Trade-in/leasing/financing. We make it possible!

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use Rodew Aqamjpfx Ag Iop On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) For more information, please contact us by e-mail. We operate 24/7.

Condition: used, mileage: 477,738 km, power: 287 kW (390.21 HP), first registration: 10/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: grey, gearing type: mechanical, emission class: euro4, loading space volume: 14 m³, Year of construction: 2006, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGA 18.390 LL Tanker Truck VIN: 7M459141 Chassis / Attachments: * Full air suspension * Wheelbase: 4,000 mm * Tyres: 315/80 R22.5 * Remaining tread depth: Axle 1: 40/60% Axle 2: 50% * Speedline aluminum rims * 1 x diesel tank * 2 x fire extinguisher holders Body: * Lindner & Fischer tank body * 2 compartments (7,000 l + 7,000 l) * F.A. Sening pump max. 1,000 l/min * 2 x compartment covers * Petrodat TMU Cab / Driver’s cabin: * M-cab * Reversing camera * Blind spot camera * Automatic climate control * CD radio * Cruise control Engine / Transmission: * 287 kW // 10,518 cm³ // Euro 4 * 8-speed manual gearbox with splitter * Engine brake * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Payload: 9,450 kg * Unladen weight: 8,550 kg Miscellaneous: * German vehicle * Safety inspection (SP) valid until 04/2026 * Tank test valid until 10/2027 * ADR FL / AT certified Redpsxnfv Rsfx Ag Isp * New technical inspection (HU) available on request ---- New main inspections, safety checks, or load/downrating adjustments are available on request. We are happy to assist you in obtaining export/transfer number plates as well as the delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors. Subject to changes, prior sale and mistakes reserved. ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and marketing of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the distribution of new and used commercial vehicles. On 11,000 m² you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. Customer satisfaction is very important to us, which is why we offer our customers an all-round excellent service package and provide them with a competent point of contact who will accompany them during the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are glad to assist you in loading your purchased vehicles. Organizing special transports We are happy to support you in arranging special transports. Temporary/export license plates We will gladly help you obtain export or temporary number plates. Completion of customs formalities We are pleased to help you with customs matters.

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades Rsdpfx Agew Dn S Ao Iop With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension Redpfxoxvz Hzo Ag Isp with intermediate shaft with splitter wedge Immediately available Location: Austria, near Graz

Year of construction: 2025, condition: new, We also offer leasing and financing options. Feel free to ask us! ‼️ATTENTION‼️ Machines currently being offered by Chinese dealers on various portals often have fake CE markings. They do not comply with EU standards and are not electrically permissible in Germany. Several customers have contacted us, asking how to extract copper from such machines, as they only produce shredded cable mixtures. Based on our own tests two years ago, we can confirm: these machines do not yield pure copper. Operation of such equipment in Germany is not permitted! Buy from us and benefit from our expertise—see for yourself on-site in Heilbronn. We will support you for years and help you reliably separate quality copper. Your Josan & Söhne Team! German quality—CE certified, EU-compliant, and available for live demonstration—not just processed or edited videos. We strongly recommend buying locally here in Germany: German warranties, compliance with German laws, fixed prices, and German-language assistance for any issues. All this is exclusively provided for machines purchased from us. You are welcome to schedule an appointment and inspect our quality in person. Remember, videos can be edited—visit us for live demonstrations‼️ For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all necessary machinery from us. Feel free to inquire. ‼️CAN BE VIEWED ON SITE‼️ Our compact model functions just as efficiently as our larger models—just smaller and more affordable. Copper granulate, prime quality. Usable in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—you can recycle it all with our machines! Josan Cable Granulation System E30 We are happy to demonstrate the machine live in Leingarten—by appointment only! We are located in Heilbronn—a German company with German laws, warranty, and service! We also speak English! ‼️Please contact us if you have any further questions! We can only respond if you provide your name, address, email, and phone number. Otherwise, your inquiry may be filtered as spam. Rodsp E Efyjpfx Ag Iop We will get in touch and advise you in advance!‼️ Here is our entry-level model: ➡️Operates on 380 V ➡️For cable diameters approx. 0.1-30 mm ➡️Power approx. 4.2 kW ➡️Input approx. 20-30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️Equipped with accident prevention (UVV), implemented by a German company This system enables you to process cables for copper recovery. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor splitters, triple separators, and more. Complete solutions for cable recycling. When you buy from us, you also buy our service! This is vital for these machines! PLEASE NOTE: Our service is only available for machines and accessories purchased from us. Thanks to our know-how and machinery, you actually obtain copper granulate—instead of unseparated material. Net price: €8,999.00 + 19% VAT: €1,709.81 Gross price: €10,708.81 CE-certified machines from us. Errors excepted. Images, prices, and equipment specifications may vary.

Year of construction: 2014, operating hours: 20,000 h, condition: good (used), SINGLE DRUM SEPARATOR SDS 1000 (REFURBISHED) The Nihot SDS (Single Drum Separator) is the ideal solution for separating all types of waste into two fractions: heavy and light. Its robust construction and proven functionality ensure long-lasting, trouble-free operation. The SDS windshifter uses industry-leading negative pressure technology to sort a wide range of materials by density and is especially effective for processing: -Poorly shredded materials -Waste containing large-sized items -Abrasive materials (glass, inerts, automobile scrap, etc.) -High volume percentage of light materials (plastics and film) -Bulky soft and hard materials -High moisture content Product Input Conveyor: Lenght: 2.750 mm Width: 1.000 mm Expansion Room: Rodpjnzh Ezefx Ag Iep Lenght: 6.750 mm Width: 2.400 mm Light Fraction Discharge Conveyor: Lenght: 9.250 mm Width: 1.000 mm Air Return Duct: Ø550mm x 1mm (max. 10m) Duct to Dust Filter: Ø300mm x 1mm (max. 10m) Single Drum Separator Product Input Conveyor 4,0 kW Splitter Drum 2,2 kW Light Fraction Discharge Conveyor 9,2 kW Recirculation fan Type RFI 65 22,0 kW Estimated dimensions aprox. (length x width x height): 12200 x 2400 x 6965 mm Weight aprox.: 10 Tn

Condition: new, mileage: 737,000 km, power: 176 kW (239.29 HP), first registration: 01/2008, fuel type: diesel, fuel: diesel, gearing type: mechanical, emission class: euro4, Year of construction: 2008, TGL 12.240 FBL Flatbed and Tarpaulin LBW 18 Pallets Chassis: • Emissions class: Euro 4 • 6-cylinder engine • Power: 240 hp • Displacement: 6,871 cc • 6-speed splitter (12-speed) manual transmission • Cruise control • Engine brake • Leaf/air suspension • Rearview camera • Roof spoiler • Sun visor • Roof hatch • Ramp mirror • Electric windows and mirrors • Radio-CD player • Tires: 265/70 R 19.5 • Tire tread: 11/11 8/8 10/9 mm • Unladen weight: 7,130 kg • Gross vehicle weight: 11,990 kg • Payload: 4,860 kg • External dimensions: 9,050 x 1,050 mm 2,550 x 3,900 mm (LxWxH) • Wheelbase: 4,800 mm Body: Rsdpfx Agewmn Txs Iep • PL - Fahrzeugbau (same year of manufacture as chassis) • Interior dimensions: 7,250 x 2,500 x 2,720 mm (LxWxH) • Split side walls • Kinnegrip • Wooden floor • Tie-down eyes • EDSCHA roof • BÄR - LBW type BC 1500 S4 1,500 kg vertical • Flatbed with side walls and tarpaulin - MOT / SP: new! - German vehicle - 1st owner Subject to errors and prior sale! Environmental sticker: green Damage: none

Condition: ready for operation (used), Wolke M 600 advanced labeling system controller Device is in very good condition ( like new ) 230 V 50/60Hz Accessories: Rotary encoder for Wolke printer Splitter box for Wolke printers Print head for Wolke printer Rsdpfop T Uiqox Ag Iop You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, SONDERANGEBOT! Neu, Vorführgerät Eine Walnuss wird geknackt, indem man die Nuss mit einem Schaft gegen die Innenwand des Splitters drückt. Die Nüsse werden in den Bunker geschüttet, von dort gelangen sie zum Brechschacht und fallen dann in einen vorbereiteten Behälter. Die Splitterwelle ist mit speziellen Platten ausgestattet, wodurch Sie alle Muttern ohne Kalibrierung knacken können. Europäisches Produkt, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer Redpewk Eirsfx Ag Iep Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Ich freue mich auf Ihre Anfragen.

Year of construction: 2017, condition: new, functionality: fully functional, Equipment: hydraulics, List of the individual hydraulic tools, unused, new and packaged: 2.00 pc. ATM2 Enerpac, flange alignment tool, model ATM2 2.00 pc. ATM4 Enerpac, flange alignment tool, model ATM4 Rjdpfx Aov Hgrnsg Isp 2.00 pc. ATM9 Enerpac, flange alignment tool, model ATM9 2.00 pc. WR5 Enerpac, hydraulic wedge spreader, model WR5 2.00 pc. WR15 Enerpac, hydraulic spreader, model WR15 2.00 pc. A92 Enerpac, spreader attachment, 10 t 2.00 pc. FS56 Enerpac, hydraulic flange spreader, FS56 2.00 pc. FS109 Enerpac, hydraulic flange spreader, FS109 4.00 pc. FSH14 Enerpac, hydr. Flange spreader, 14 t, FSH14 4.00 pc. P77 Enerpac, Hydraulic hand pump, 2-stage, 0.77 l tank, 700 bar 6.00 pc. HC7206C Enerpac, Hydraulic hose line, length 1.8 m, with connectors on both sides 4.00 pc. GA45GC Enerpac, 45° angled pressure gauge with adapter and coupling 2.00 pc. AM21 Enerpac, 2-way distributor with needle valves 2.00 pc. NC2432 Enerpac, Hydraulic nut splitter, 24-32 mm hexagon, NC2432 2.00 pc. NC3241 Enerpac, Hydraulic nut splitter, 32-41 mm hexagon, NC3241 2 pcs. NC4150 Enerpac, Hydraulic Nut Splitter, 41-50mm hex, NC4150 2 pcs. NC5060 Enerpac, Hydraulic Nut Splitter, 50-60mm hex, NC5060 2 pcs. NC6075 Enerpac, Hydraulic Nut Splitter, 60-75mm hex, NC6075 Total new price: €75,750.40 net Used price: €39,900.00 net

Condition: used, functionality: fully functional, mileage: 998,650 km, power: 427 kW (580.56 HP), first registration: 11/2016, fuel type: diesel, tire size: 315/80, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, SCANIA R580 ROLL-OFF BOX CARRIER 3 AXLES 6X2 580 HP AUTOMATIC + RETARDER PACE 4500 TIRES 315/80 AT 40% ALLOY WHEELS DISK BRAKES FRONT + REAR AIR SUSPENSION LONG CAB WITH 2 BEDS SMALL SPLITTER REFRIGERATOR IN CAB LEATHER SEATS PRICE: 64,000 + VAT Rjdpfxerfx Uae Ag Iep