Used Temperature Transducer for sale (6,723)

Condition: used, Duct sensor for rel. Humidity/temp. 2 x 0...10 V Lhedpeb H Ebfefx Adpok -Type: QFM2160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Condition: used, Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion length: 150 mm -Immersion temperature sensor with protective tube -Technical specifications: -hreaded nipple: G1/2A, PN10 -Degree of protection: IP 42 IP 54 with cable gland -Measuring element: Ni 1000 Ohm -Application range: -30...+130 °C -Connection: 2-wire Ljdpfeb H Ebdox Adpohk -Weight: 0.3 kg

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat Lhjdpfxsfm T Ezo Adpek -Manufacturer: Jumo, temperature monitor -Type: TB "0" -System outputs: AC 110..240 V -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Condition: used, Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM3160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption: Ljdpfx Adeb H Ebgjpshk

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens Lsdpfxefuw Npo Adpehk -Type: PS1d-44/ -Dimensions: 265/145/H145 mm -Weight: 3 kg

Condition: good (used), Autotherm Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully refurbished) Autotherm AW temperature control unit: For highly precise temperature control of water. Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Temperature control units, for example, supply tempered water to tools, open baths, double-walled tanks, heat exchangers, and heating chambers, in order to maintain them at a highly precise, desired temperature. Application areas: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600mm x 840 mm x 910mm Power consumption: 400 Volt / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See image) Ledszhkb Eopfx Adpehk (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Lhodpjxpt Rrefx Adpjk Medium: Water Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: new, Model: dtrans p30 Lhsdsh Rul Espfx Adpek Modified Item: No MPN: 404366/000 Country/Region of Manufacture: Germany Custom Bundle: No Brand: Jumo UPC: Does not apply

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Ljdpjzg Nbhefx Adpshk Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: excellent (used), For sale: a Vötsch VT 7004 climate chamber, designed for precise research and testing under controlled temperature conditions. This unit is suitable for use in laboratories, quality control departments, materials research, electronics, and the automotive industry. The chamber is equipped with an electronic temperature controller, an efficient cooling system, and a forced air circulation system that ensures uniform temperature distribution throughout the working chamber. The interior is made of stainless steel, which facilitates cleaning and ensures high durability. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VT 7004 Year of manufacture: 2000 Device number: 58566024350010 Power supply: 230 V AC, 50 Hz Rated power: 2.0 kW Rated current: 10 A Refrigerant: R404A – 0.7 kg R23 – 0.22 kg Maximum working pressure: 25 bar Interior: stainless steel Electronic temperature controller Forced air circulation Door with silicone seal Lighting and service access port in the chamber Lodpozi U Tnefx Adpshk Compact design Condition: Used unit. Visually in good condition. The chamber is clean and complete. Sold in the exact condition as shown in the pictures.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Lhedjzi T Nhepfx Adpjk Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Ljdpfx Ajzg Tzfsdpehk Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Lsdpfxszg Ty Ue Adpshk Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm Ljdpjzg Ty Isfx Adpjhk External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec, water-cooled Temperature test chamber, N series Lhedpfx Aszg Tynedpok Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180 °C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: Lhedpfszg Twasx Adpsk 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Deviation (temporal): ±0.1 to ±0.5 K Temperature Deviation (spatial): ±0.5 to ±2.0 K Temperature Change Rate (cooling): 5.0 K/min Temperature Change Rate (heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled. Refrigerant: R-404A and R-23 Weight: approx. 570 kg Lsdpfxozg Tp Ns Adpjhk For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. New filling with legally compliant refrigerant. 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of Delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature Range: -70°C to +180°C Lhsdpozg Tp Asfx Adpsk Temperature Deviation (Temporal): ± 0.1 to ± 0.5 K Temperature Deviation (Spatial): ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 Liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Pressure Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Opening: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: Approximately 570 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers will be subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Thermal Compensation at +20°C: 3000 W Thermal Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free Field Measurement): < 69dB (A) Side Access: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: Lhsdpfx Ajzg Tpisdpek 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants compliant with legal regulations 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of Supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: width 560 mm, depth 350 mm, height 630 mm External dimensions: width 850 mm, depth 1030 mm, height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404 A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your security as a buyer, please note the following information: Lhedpfx Adszg Tpcopsk The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature testing chamber, water-cooled Performance data: With a temperature change rate of 25 K/min Lhjdpfxjzg Eygs Adpok Test chamber dimensions: height 750 mm, width 580 mm, depth 615 mm External dimensions: height 1775 mm, width 780 mm, depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation (over time): ± 0.1 to ± 0.5 Temperature homogeneity (spatial): ± 0.5 to ± 2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 270 liters 2x side ports, diameter 125 cm 1x side port, diameter 50 cm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range Lhedpfxszhn Tls Adpek - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Year of construction: 2001, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal Lhjdezhn Tfjpfx Adpok for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 2001 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Year of construction: 2017, condition: excellent (used), functionality: fully functional, The four temperature control units are for sale; the price is per unit. All units have been in operation for less than 1000 hours, which we can document with a photo. Lhjdjznlffjpfx Adpek Medium: Water Operating temperature: 140 degrees Heating capacity: 9 kW Cooling capacity: 40 kW

Condition: excellent (used), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Lhjdpfx Aszgtahodpsk Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.