Used Circulation Thermostat for sale (1,629)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Lsdpfx Ajz H Sgdjkqshn Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm Lsdjz Hvzropfx Akqjhn - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Offered for sale are 2 refrigerated heating circulators with digital temperature control. Unit 1: Temperature range: -25 to +150°C. Refrigeration system operation: up to max. +80°C. Unit 2: Temperature range: -25 to +200°C, refrigerant charge: 0.07kg. Maximum pressure: 17bar. Control system: Digital CC2 temperature controller with display and control buttons. Equipped with a stainless steel bath, circulation and cooling unit, and connecting lines. Inspection possible by arrangement. Ljdpfxs Ad Np Rj Akqshn

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth sliding roller roller with saws smooth, sliding roller – bottom: guide pawls Ledpfxjztad Tj Akqehn track 2 feed speed settings + stepless central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approximately 1800kg – made in Italy – DTR documentation – robust machine – multi-blade saw, used, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical specifications: - max. diameter of the main blade (without scoring blade) 400mm - max. diameter of the main blade (with scoring blade) 350mm - blade bore diameter 30mm - max. cutting height for a 400mm blade - 90 degrees - 120mm, 45 degrees – 85mm - max. cutting height for a 350mm blade - 90 degrees – 95mm, 45 degrees – 67mm - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on the carriage 1700mm - cutting width on the carriage 1400mm - cutting width with the guide 1350mm - main motor 6kW - table dimensions 1190x990mm - with extension 1880mm - with lengthening 1890mm - with scoring blade - max. diameter of the scoring blade 120mm - diameter of the scoring blade spindle 20mm - scoring blade motor 0.75kW - 3 types of rotational speeds 3500, 4500, 6000 rpm - brake - diameter of the dust extraction nozzle 80, 120mm - dimensions (length/width/height) 3050x2200x1600mm - weight 800kg ADVANTAGES – Made in Poland – DTR documentation – Blade guard – With scoring blade – With extension and widening – Used saw, very good condition Lhsdpfx Aeztavvokqon Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Lhedpfx Akox Etu Eoqen

Condition: used, Carpet Carousel System, 5 Meters Carousel system for carpet and flooring rolls. Robust and fully functional carpet carousel system. This system is ideal for space-saving, vertical storage and presentation of carpets, PVC rolls, or other heavy roll goods. For 5-meter carpet rolls. Lodpfx Aoz Ahyhekqshn Capacity: approx. 12–16 support rods / roll positions. The carpets and flooring for the respective carousel system can be purchased separately for €1,000 net. “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 Lhodo Aa Aivjpfx Akqsn -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection Lhjdpfx Akezxxmkjqjn CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade 400 mm – Double mitre – 2 pneumatic clamps – Misting lubrication system – Blow gun – Protective cover – Documentation Lhodpfjgg N Drox Akqsn – 400V

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Max. cutting width: 0.6 m Ljdpfsz Dnppex Akqohn Max. cutting height: 140 mm Ready for immediate use. The blades will be replaced with new ones.

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm Lsdpfx Akoz Hwc Rsqshn -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: excellent (used), functionality: fully functional, powerful circular saw table, new Widea blade. Lodpfx Akoz S Uz Njqshn sturdy table, ready for use.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Features and Technical Specifications - Motor power: 4 kW/400 V - Saw blade swivels on both sides from -46° to 46°—a total swivel range of 92° for flexible angle cuts against the rip fence and crosscut fence - Maximum cutting height: 72 mm - Saw blade diameter: 250–315 mm - Saw blade speed: 5,000 rpm Lhodpfj Advffjx Akqjn - Cutting width: 1,250 mm - Sliding table length: 3,300 mm - Touchscreen control with an eye-level control panel - Electric height and tilt adjustment of the saw blade - Intuitive operating menus with step-by-step guidance for complex operations - Integrated calculator and special functions for angle cuts and chamfering - Tool management for up to ten tools, enabling dimensionally accurate setup without the need for re-referencing after a saw blade change - Keyless “VLock” quick-change saw blade system for fast tool changes - Precision sliding table with interchangeable table lip and sturdy hollow-section profiles, lockable in any position - Ball-bearing-mounted rip fence with adjustment via handwheel and digital display - Length stop with smooth-running stop carriage and fine adjustment - Splitting wedge guard for a clear view of the saw blade and workpiece - Dust extraction port on machine stand: 120 mm - Dust extraction port on guard: 60 mm - T74 parallelogram cross table - DIN A4 guide holder - T74 length stop, similar to the above, with continuous stop surface and two hinged stop elements - CE standard - Weight: approx. 1,250 kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: Lhedpfx Aoz Ny Ddokqsn - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: excellent (used), Year of construction: 1982, ULMIA 1710s table saw Year of manufacture: 1982 Tilt angle: 45° Lsdpfx Akoz Sb Evjqehn Cutting length on the carriage: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between the saw blade and the fence: 650 mm Carriage with a scale for angle cutting Table size: 1000x630 mm

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Lhedpfxexwc Nmj Akqjn Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Straight cut, range 105 x 105 mm, round = 120 mm Motor: 1.7 / 2.2 kW Saw blade size: 350 mm Saw blade speed: 1400 / 2800 rpm Lhjdjz S U R Rspfx Akqjn Pneumatic tensioning.

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cutting length: 2700 mm - Cutting width: 1050 mm - Cutting height: approx. 145 mm - Motor: 5.5 kW - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit - With parallel cutting device Lhedpfxezyy Das Akqjn Weight: approx. 1,270 kg

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Lsdpsz Il Evsfx Akqjhn Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Lhjdpezwhwvsfx Akqjn Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation Ledpfxjrh Dkyo Akqehn - 400V

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Lodjz Sln Uspfx Akqohn Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Ledpfx Aori Skwskqohn Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 70 kg, Wilo Stratos circulation pump, double pump, D80/1-12, article no.: 2150586, BL 360mm We offer the circulation pump for sale. Art. no.: 2150586 / 15w16 Voltage: 230V 50/60 Hz PN 6/10 P1: 40-1550 W Installation length: 360mm ︎ The heating pump, which we recently disassembled and was functioning perfectly until removal, is ready for use and in the condition shown in the pictures. ︎ Runs extremely quietly and smoothly. ︎ Further technical data: See photos. ︎ Scope of delivery as shown in the pictures. Description: The item offered here is in good condition. Inspection before purchase is possible and is highly recommended. All our items are disassembled, cleaned, and visually inspected for damage by qualified personnel from our company before sale. Please refer to the description and the pictures for all relevant data/information about the item. All information is provided to the best of our knowledge and belief; the offered goods are sold as described and after inspection. Shipping is possible, but the buyer pays the shipping costs. Shipping and packaging: €70 #Shelf 23-7-1 International buyers welcome Please ask for shipping costs to Europe and overseas. Lsdpfx Ajy Szfxjkqehn