Used ovens for sale (229)

Year of construction: 2016, condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg Dedpscdi R Eofx Afnekh

Condition: new, Electrically heated conveyor furnace Djdpfx Afegvmg Hjnekh

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE Dkedponzhx Hsfx Afnsh description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: used, Year of construction: 1991, functionality: fully functional, VTTC 224 - R Useful dimensions: 350*600*450 Load: 180 Kg Vacuum level 10*5 (diffusion pump) Maximum temperature 1320°C Cooling pressure 5 Bars 1 spare Casing + turbine + spare parts Djdpfx Afjwlphujnjkh

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave system System and functional description Microwave system consisting of two MW50 V microwave modules, an inner roller conveyor and two outer roller conveyors. The actual microwave chamber consists of a 3 mm stainless steel sheet and has switch cabinet segments permanently mounted on the long side in which the high-frequency components are installed behind mechanically and electrically secured covers. The roller conveyor system for transporting the pallet within the system is manufactured in microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which emit energy directly into the chamber interior. This technology guarantees an even distribution of energy within the chamber. The magnetrons can only be switched on when the door is closed and pressed down. The sealing system at the door opening prevents microwave leakage radiation. Any vapors generated are extracted via 2 extraction fans with a total capacity of 17,000 m*/h (free-blowing) . Dodpfx Aswhvcwsfnskh The necessary cooling of the high-frequency components takes place via the air flow of the extraction fans, supported by 4 supply air fans (free blowing capacity a' approx. 3,500 m*/h). A roller conveyor with its own drive is located in front of the system. The pallet is loaded and unloaded manually by the customer. Initiators are used to check whether the pallet is correctly positioned on the roller conveyor. The program is started at the control panel using a switch. The loaded pallet is transported into the microwave unit and positioned using a light barrier. The doors of the microwave system are closed and the microwave exposure is switched on . After the microwave exposure time has elapsed, the door is opened and the pallet is transported onto the unloading roller conveyor. The switch-on time of the magnetrons can be preselected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Back-up fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight; 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been in use New price €300,000 Further ovens in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : Dedpfx Asim Ik Sjfnjkh 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Maße: Außen (L x B x H) 3000 x 1480 x 1750 mm Brennkammer (L x B x H) 2600 x 270 x 100 mm Further articles - new and used - you will find in our store! Djdsnucguepfx Afnekh International shipping costs on request!

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP Djdpfx Aoxc D E Hjfnjkh plasma generator: MAG-Puls was newly acquired in 2008

Condition: used, El. heated pit furnace, make Borel type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm Dedpfxovv Tk Ae Afnekh without lid and control cabinet

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C Dodpjhgiz Iofx Afnskh ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW Dodogi Dv Dopfx Afnjkh heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: used, El. heated pit furnace, make Borel Dsdpfx Afevv Sw Ionekh with air circulator type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan Dksdpfx Afev Sbc Eonsh ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS Dsdpfxomfn Ruo Afnekh temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C Dkodpfx Afjfc Hbdensh - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: used, Year of construction: 1992, Some parts of the burner are still in good condition and can be reused as spare parts. Parts that can be used in emergencies (50 pcs available): Dkodpfx Afow N Rq Doneh 1. Recuperator 2. Combustion chamber 3. Valves 4. Air guiding tube 5. Exhaust guiding tube 6. Ceramic tube for electrode 7. Air, gas, and exhaust heads If you are interested or require further information, please feel free to contact me.

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 600 mm wide, 200 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015) Dkjdev Ifzqopfx Afneh

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 700 mm wide, 230 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 160 kW Heating: electric, heating coils, semiconductor relay "on/off" Working temperature: max. 1130° C Dsdpfsv Imhxsx Afnokh Heating zones: 4 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 700 mm Belt speed: adjustable from approx. 50-800 mm / minute Cooling zones: cooling zone 1 as a wear part with insulation; 8mm base plate reinforced with beads, double-walled construction, length approx. 1.5 m, cooling zone 3 + 4 as double-walled convection cooling section Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle Protective gas: Exogas, Endexo retorts with insulating flange installed in the furnace Dimensions: Working height approx. 1000 mm, heated length (4 zones) approx. 3750 mm, furnace length approx. 6000 mm, feed table approx. 1200 mm, total length approx. 20 m Furnace is available twice (built in 2008 and 2013)

Year of construction: 1997, condition: used, Usable space (height/width/depth): 800mm x 1200mm x 1200mm Maximum batch weight: 1000 kg Maximum furnace temperature: 1350°C, temperature uniformity: ±5 K Control: Stange SE-502 Heating: Electric Heating element material: Graphite Heating element design: Graphite rods Total heating power: 190 kW Number of control zones: 2 Additional option: Convective heating Cooling gas / gas pressure cooling: Nitrogen N² 5.0 / 1.49 bar Dodpfx Aowp R Anjfnekh Cooling direction: 2 RK (vertical in alternation) Vacuum system make: Leybold Operational vacuum: 5 x 10-2 mbar (fine vacuum)

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm Dkjdpjv Igcpefx Afneh

Year of construction: 1994, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Dkjdev Ipcxjpfx Afneh Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included.

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 Dsdpfxjclupds Afnokh electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Dodpfx Aecn Tr Iofnekh Control voltage 230 V Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg very little used in a UNI

Year of construction: 2011, condition: good (used), Heated surfacefinishing machine Dkjdpfofndpnjx Afnoh for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Djdpfx Afeuhmacenekh Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box