Used ovens for sale (232)

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm Cgodpfxjcdi R Es Aftjp useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace Codpfx Afemfn Rujtjgp chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Year of construction: 2005, condition: ready for operation (used), Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement. Cgsdpfx Aeylzg Ijftop

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Cgjdeykyqiepfx Aftjp

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN101660321, 12-month warranty, in stock Csdoylkz Ujpfx Aftjgp -Electrically resistance-heated tilting crucible furnace system for melting aluminum -Max. furnace temperature: 1200 °C -Max. melt bath temperature: 1050 °C -Melting capacity: 320 kg Al/h -Controller H 100 (5 programs with 4 steps each) -Includes 2-channel preset timer and 6100A recorder for thermocouple data logging for customer-side connection -No exhaust system required -Integrated safety system: In case of thermocouple failure, the furnace continues operation at reduced power to prevent the melt from solidifying -Temperature limiter for the chamber as overtemperature protection. The limiter disconnects the heating system once the set limit temperature is reached and only reactivates it after the temperature has dropped below the threshold. -Power rating: 140 kW (increased!) -Mains connection: 400V 3/N/PE, 50 Hz -Energy consumption (lid closed/open) approx. 8/17 kW -Weight approx. 3000 kg -External dimensions (L x W x H): approx. 2010 x 2000 x 1460 mm -Documentation, CE declaration Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath BROOKFIELD Type TC-102D Cgodsxcbnxjpfx Aftop Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Temperature uniformity

Year of construction: 2008, condition: excellent (used), functionality: fully functional, machine/vehicle number: FX036084, Resistance-heated system with a gas-tight furnace retort, used only for testing purposes Application: hardening, nitriding, nitrocarburizing, tempering Gas nitriding of quenched and tempered steels (e.g., 42CrMo4), which are suitable for hardening due to their chemical composition and, in the tempered state, exhibit good toughness at given tensile strength. Intended use includes, for example: crankshafts, steering knuckles, connecting rods, cold-formed pressed parts, etc. Further applications: annealing, hardening, quenching and tempering, and tempering of metallic materials. Fuel gas equipment with flare system, so the furnace can also be used for debinding. - Continuous operation Tmax 800°C - Maximum temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gassing device: 2 different protective gases as well as fuel gases - Gas circulation - Vacuum unit - Internal retort WxDxH 580x830x1500 mm (special length) - Retort volume approx. 722 liters - Maximum batch weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare device with flame monitoring - Viewing window DN150 - Max gas operating pressure 7 mbar - Mains voltage 400V, 3 phases, N, PE - Heating capacity 70kVA - Rated current 3x97A - Weight 1900 kg - External furnace WxHxD 1700x1950x2750 mm - Control cabinet WxDxH 510x1360x500 mm - Operating manual, circuit diagrams, CE declaration Inspection by appointment in our warehouse. We are happy to offer assembly and transport services. Cjdpfxsylacns Aftjgp We supply new and used industrial furnaces.

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 1,300 °C, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, Electric kiln for firing / sitering porcelain, stoneware, earthenware, technical ceramics, with extactable car/s, PAGNOTTA TERMOMECCANICA Deruta,Italy, type FFEC/AT, maximum temperature: 1300°C. Cgsdpfx Aew Idq Ueftjp Loading dimensions: Length: 1400 mm Width: 800 mm Height: 1000 mm Use and maintenance manual CE certification 12-month warranty Brand new machine made in Italy The specifications and attached photos are purely indicative. Customized machines are available, made to specific measurements for each thermal process.

Condition: used, Hardening furnace, muffle furnace, chamber furnace, annealing furnace HERAEUS Type KR 260 Serial No. 4412 Year of manufacture approx. 1972 Temperature range 850° (max. 1150°C) Internal dimensions W x D x H 240 x 450 x 140 mm Connected load 8 kW Power supply 380 Volt, 50 Hz, 20 Amp. - According to temperature indicator, furnace reaches max. 850° in approx. 1 hr 45 min. - In practical test, at 850° C (per indicator) the furnace switches off electrically. - Temperature display - Temperature setting via 4 switching stages and potentiometer Space requirement L x W x H 750 x 900 x 1600 mm Net weight 160 kg Cgjdpsydqd Tjfx Aftep

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : Cedpfx Aeim Ik Softjgp The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Maße: Außen (L x B x H) 3000 x 1480 x 1750 mm Cgodponucgusfx Aftop Brennkammer (L x B x H) 2600 x 270 x 100 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave system System and functional description Microwave system consisting of two MW50 V microwave modules, an inner roller conveyor and two outer roller conveyors. The actual microwave chamber consists of a 3 mm stainless steel sheet and has switch cabinet segments permanently mounted on the long side in which the high-frequency components are installed behind mechanically and Cgsdswhvcwspfx Aftop electrically secured covers. The roller conveyor system for transporting the pallet within the system is manufactured in microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which emit energy directly into the chamber interior. This technology guarantees an even distribution of energy within the chamber. The magnetrons can only be switched on when the door is closed and pressed down. The sealing system at the door opening prevents microwave leakage radiation. Any vapors generated are extracted via 2 extraction fans with a total capacity of 17,000 m*/h (free-blowing) . The necessary cooling of the high-frequency components takes place via the air flow of the extraction fans, supported by 4 supply air fans (free blowing capacity a' approx. 3,500 m*/h). A roller conveyor with its own drive is located in front of the system. The pallet is loaded and unloaded manually by the customer. Initiators are used to check whether the pallet is correctly positioned on the roller conveyor. The program is started at the control panel using a switch. The loaded pallet is transported into the microwave unit and positioned using a light barrier. The doors of the microwave system are closed and the microwave exposure is switched on . After the microwave exposure time has elapsed, the door is opened and the pallet is transported onto the unloading roller conveyor. The switch-on time of the magnetrons can be preselected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Back-up fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight; 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been in use New price €300,000 Financing through our bank is also possible. komplett-konzept.leasingo.de Further ovens in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2004, condition: good (used), ATMOSPHERIC HEAT TREATMENT LINE (NITROGEN/METHANOL) comprising 3 high-temperature furnaces, 2 tempering furnaces at 450 °C, 1 industrial washer, 1 automatic loader, electrical cabinets, and a storage magazine. Csdpjyc Sm Tsfx Aftjgp

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN49983, Chamber furnace in very good condition. 12 months warranty. - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with flaps, electrically operated by Belimo actuators - Inlet fan controlled via frequency inverter and regulator - JUMO control system (language can be switched!) - Additional drag element type S for external data logging - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Ampere - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed connection with 32 A plug - Documentation and CE declaration We have several units of this furnace model in stock. Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace Cgjdpfxox U Ekde Aftop

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. Cgedpsguku Uefx Aftep 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Max. temperature: 750 °C Cgedpfx Afjydl Iastjp Connected load: 84 kW Weight: 3.7 t

Year of construction: 1996, condition: ready for operation (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Codsydlqhspfx Aftjgp Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) Cedpfx Aeydlpkjftegp - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Codpeydll Sjfx Aftegp All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: Cgedsydlllepfx Aftep - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Cgsdpfx Asydld Ioftop Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty Cedpfxewd Hale Aftsgp New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: ready for operation (used), Fully functional until dismantling, not refurbished! - Tmax 1200°C - Capacity 420 liters - Internal dimensions: w x d x h 700 x 600 x 1000 mm - Lifting door - Bentrup controller TC 507 - Power 27 kW Cgedpeyi Tldefx Aftjp Viewing possible by appointment at any time. Not connected to power. Furnace, furnaces, hardening furnace, annealing furnace, industrial furnace, chamber furnace, firing kiln, curing oven, tempering furnace, chamber furnace, chamber dryer

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Cgsdpoyniz Esfx Aftop Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Cgedpfeyfv N Rsx Aftjp