Used Hermle C 600 for sale (135)

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Manufacturer: Hermle Gedpfx Aeyrr Ucoggobi Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Gbjdpfx Ajyrirroggsi Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: good (used), Year of construction: 2000, functionality: fully functional, Machine parameters: Travels in X, Y, Z axes: Gsdpfx Agjyg R S Ajgebi 650X450X450 mm Description: The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Gbsdpsx Up E Eefx Aggji Control: Heidenhain 530 Operating hours Spindle hours: 18,396 Machine hours: 56,040

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Gsdpoxx U Hyefx Aggjbi

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools. Gjdjxnkfkopfx Aggjbi

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg Gbsdpfx Agjwbi A Dogji - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: good (used), Year of construction: 1999, Hermle C 600 V, year of manufacture 1999, Heidenhain TNC 430 control, travel X/Y/Z 600/450/450 mm, machine from first owner, table size 800 x 465 mm, spindle speed up to 12,000 rpm, 30-tool changer, SK 40 taper, 3D measuring probe, 9,400 spindle hours. Gbjdpjxmg Eqsfx Aggoi

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m Godpfx Agst Hxbwjgjbi

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V Year 2006 CNC CONTROL HEIDENHAIN ITNC 530 TRAVEL DISTANCES 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEEDS UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. PRICE ON REQUEST Plus 19% VAT, ex location, unpacked, uninsured - EXW Technical data as per attachment non-binding - errors and prior sale reserved. Delivery time: immediate - subject to prior sale. Payment: immediately upon receipt of invoice, net - prior to removal/collection. Gbedoxf Huvjpfx Aggsi We will be happy to demonstrate the machine to you under power, by appointment.

Condition: new, 3-fold attachment table for Hermle C20U, with 3 rotary tables rotating synchronously, programmable via the C-axis. Also available for C800U, B300U, C600U, C30U, C250U, and C32U. In use at renowned companies multiple times over the past 20 years. Machine 3 workpieces simultaneously, reducing tool changes and increasing machine uptime. For inquiries, contact: huber-cnc.com Godpfjylyqfex Aggebi

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t Gbedpfsvwgm Tex Aggei dimensions of the machine ca. 3100 x 2400 x 2500 m his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,890 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, controller manufacturer: HEIDENHAIN, controller model: 530, number of axes: 5, Universal machining centre manufactured in 2014. This 5 axis HERMLE C 400 U features a high-pressure IKZ, laser measuring system, and a 35-tool magazine. With a spindle speed of 18,000 rpm and a net weight of 10,500 kg, it offers robust capabilities for various machining tasks. Consider the opportunity to buy this HERMLE C 400 U universal machining centre. Contact us for further details. Gedpfx Ajyt Hrljggjbi • Tool magazine: 36 tools (large drum/barrel type) • High-pressure through-spindle coolant (IKZ) • Laser measuring system • Spindle hours: 4,890 h • Operating hours: 5,800 h • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Rated current: 55 A • Power consumption: 34 kVA • IKZ with paper belt filter and 80 bar • Tool measurement length and break A2 • Rotary Table 650mm Additional equipment • Suction (mist extraction) • 3D measuring probe Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory Gedpfx Ajylw Stjggsbi • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz • Control voltage: 24 v • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Gbedpjyarzrsfx Aggoi Machine still under power

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 8,5 x 5,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - FASTEMS - incl. FASTEMS FPC-400 Pallet-System / 15-pos. - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change Gbsdpfx Asxmagzsggoi - FASTEMS Computer is not working

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system Gedpjynw Erefx Aggjbi

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm Gsdpfjx Dndcjx Aggobi y-travel 600 mm z-travel 500 mm

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM Gbsdpfsv Hxifex Aggsi - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS - A AXIS +15º / -97º C AXIS 360º - C AXIS 360º

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: Gbodpfx Aoylkzzeggji X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm SK40 30 tool changer positions

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Gsdetmtxmopfx Aggobi Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm Gbsdpfxoyfgtas Aggoi y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Year of construction: 1993, operating hours: 13,924 h, condition: excellent (used), x-400,y-330,z-350,Winkeltisch 630x335,SK 40, 40-6.000 U/min,Meßtaster , Gbedpfxjfgz Rko Aggei Steuerung Heidenhain TNC 425

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Gjdpfjx S I Akox Aggebi

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, Technical Data – HERMLE C 40 UP Godexx Rxrepfx Aggebi Control System: - Heidenhain iTNC 530 - Travel X/Y/Z: 850/700/500 mm Options: - Heidenhain DNC - DXF Import - Kinematic Opt iTNC Main Spindle: - Speed: 18,000 rpm - Tool Holder: HSK-A63 Tool Magazine: - Additional Magazine ZM43 Feed / Axes: - Linear guideways – Dynamic Version - Table variant: NC-SRT Ø 420 mm, worm gear drive - Table axis: A-axis offset from center - Table specification: Pallet clamping system Coolant System: - Internal coolant supply 80 bar - Coolant filter type: Paper band filter for internal coolant system Chip Disposal: - Scraper belt conveyor Cab / Safety: - Base structure - Automatic cabin door - Manual roof cover - Laminated safety glass window Electrics: - Frequency: 50 Hz - Country key: DE Pallet Automation: - Pallet changer: PW160, 400 × 400 mm - Pallet storage MMS / Measuring Systems: - External MQL (Minimum Quantity Lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Prepared for additional touch probe Software / Options: - Event Messenger - Tool identification HSK - Machine license: TCS-Soflex - System monitoring Free Accessories: - Electronic thermal compensation - Electronic hand-held control module - Oil mist extraction (prepared & with post filter) - Flange for oil mist extraction - Sealing air for scales - Chip washdown gun - Bed flushing - Internal & external air blast - Signal light - Test documentation - Test protocol: C 40 iTNC 530 PW160