Used Hermle C22U for sale (153)

Condition: used, Year of construction: 2016, operating hours: 76,605 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 18,160 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-Axis Machining Centre Year of manufacture: 2016 Machine on-time: 76,605 h, Spindle on-time: 18,160 h Siemens 840D sl Operate 55 tool positions, HSK-A63 NC swivel rotary table SRT320 mm C-axis with worm drive Duedpfx Ajxxg Ezjgdjl A-axis with single-side drive Standard coolant system, without high-pressure coolant Rear chip conveyor External air blast Spindle center air blast Chip flushing gun Oil mist extractor including afterfilter Automatic cabin door Manual cabin roof Siemens electronic thermal compensation Heidenhain touch probe The machine is fully operational and calibrated. Machine can be inspected and tested under power at any time.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Djdpfx Agjxpil Sedjul Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: used, Year of construction: 2013, x-travel 450 mm y-travel 600 mm z-travel 330 mm control iTNC 530 HSCI Heidenhain turning speeds max. 18.000 min/-1 power capacity - main spindel 31 / 17 kW max. Torque 98 / 54 Nm tool taper HSK A63 rotary table dia. 320 mm Swivel range A: +/- 135 ° rotatable C: 360 ° max. table load 300 kg Number of revolutions A: 25 / C: 40 rpm T-slots 4x 14H7 number of toolpositions 55 pos. tool taper HSK A63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8,0 kg max. total weight 220 kg change-time chip to chip 4,5 sec Accelaration 8 m/sec² Dodot Syf Uopfx Agdsul Feed force 4,5 kN rapid traverse ( X / Y / Z ) 30 m/min total power requirement 40 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 22 U - Good condition! - Linear axes XYZ and drives renewed - new spindle Q1/2024 - Optional: Internal coolant supply retrofitting possible (by Hermle, for an additional charge) - Additional container with paper belt filter incl. level monitoring - Conversion of coolant lubricant tank (lifting pump incl. level monitoring)

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Dsdovtmhpepfx Agdeul Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Hermle C 22 U with RS05 Automation Year of manufacture: 2022 Control: Heidenhain TNC 640 X-axis travel: 450 mm Y-axis travel: 600 mm Dusdsp Eci Tspfx Agdsl Z-axis travel: 330 mm Table size: ⌀ 800 mm Spindle: HSK-A 63 Spindle speed: 18,000 rpm Tool changer: 55+ ZM216 loaded, 271 tool positions Operating hours: approx. 11,000 h Spindle hours: approx. 7,500 h

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Duodsxqfzrjpfx Agdjl Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank Djdpox R S Smsfx Agdeul HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, For technical data, see images.... Dujdpfx Agsx R S R Nsdjl

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Djdpfxsx S I Ako Agdoul

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Dedpfel Dvx Eox Agdjul Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders Duedpfx Agsx Ry Atjdel  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: Dusdpou Nc U Iofx Agdjl - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: excellent (used), Hermle UWF 900 Year of manufacture (according to circuit diagram): 1992 Heidenhain 407 control Handwheel Network connection Spindle speed: 4,000 rpm Technical data: X travel: 600 mm Y travel: 400 mm Z travel: 420 mm Tool holder: SK 40 Distance spindle/table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Dusdpfx Agoxf Ec Sedol Videos of the machine available!

Condition: used, controller manufacturer: Heidenhain, controller model: i TNC 530i, For sale: Hermle 5-axis machining centre type C 800U (5-axis simultaneous) equipped with a Heidenhain i TNC 530i control. The machine is in good condition and available from stock, subject to prior sale. The machine features a table size of Ø 630 mm. X, Y, and Z axis travels are 800 x 600 x 500 mm. The machine also offers a maximum spindle speed of 16,000 rpm, spindle cooling with a maximum pressure of 40 bar. Included are a Heidenhain probe, a Stark zero-point clamping system, and a chip conveyor. Duodpfx Agox Ry Nmodel

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. Dujdpfxoxryfzo Agdol The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Max. rapid traverse m/min X, Y, Z: 35,000 Dujdpfx Agsxak A Hedel Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe MACHINE DIMENSIONS Length mm: 2,130 Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine from the Hermle brand and the type UWF 801 The machine is fully functional, easy to use and yet efficient, which makes it ideal for the DIY enthusiast but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Djdpjvtpl Rsfx Agdoul Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Machine parameters: Travels in X, Y, Z axes: 650X450X450 mm Description: Dujdpsxyipfjfx Agdel The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 430, rotational speed (max.): 16,000 rpm, spindle speed (max.): 16,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, Equipment: documentation/manual, For sale is a well-maintained Hermle C800V CNC 3-axis machining center, year of manufacture 2001, equipped with Heidenhain TNC 430 control. The machine has been serviced regularly and is in excellent condition. Technical data / Features: • Travel paths: X 800 mm, Y 600 mm, Z 500 mm • Spindle: up to 16,000 rpm, with SK 40 clamping system Dodpsx Rw Igjfx Agdjul • Tool changer: 30-position magazine • Additional accessories included: o Heidenhain 3D probe (TS 642) o Chip conveyor o Coolant spray gun o Original machine documentation • Essential spare parts have been regularly replaced (e.g., tool changer flap, electrical cabinet cooler, magazine clamps, LED workspace lighting, windows). • Additional options (at extra cost): machine vice and up to 80 nearly new SK 40 tool holders. Condition: Used, but very well maintained and fully functional. Optional accessories: Machine vice and up to 80 new SK 40 tool holders available at extra charge. The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Tool taper SK40 Number of axis 3 This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Application Types Dedpfjx D Izzex Agdjul Milling

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package Djdpot Ifm Njfx Agdoul One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Djdpox D Ew Hjfx Agdeul Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Dedpfxev Tc Apo Agdsul Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Dsdpfsvtpm Uox Agdsul Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Dodpfxjrvitlo Agdsul Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website