Used X Ray Viewer for sale (64,139)

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Bwedpfxjzl Scrs Aqgsr Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: good (used), Bizerba X Ray Machine Bjdpfjyivgqsx Aqgewr With reject facility Fully stainless steel Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals The unit comes with an option of a Gamma Monitor, Red Eye G20-10 In every day use

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit Bsdpfx Aqeyzpkzegjwr X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Bedpfx Aqeymfmzsgswr Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: used, 1 unit X-ray fluorescence spectrometer FISCHERSCOPE XDL-XYM with keyboard, monitor and computer Color: as shown in the pictures, according to the images and inspection Bodpfx Aozqcn Neqgowr Condition: used

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Manufacturer: TITECH TOMRA Type: X-TRACT 1200 Machine in PERFECT working condition. Bodpfxeyy A Uwj Aqgjwr Complete machine overhaul performed. Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Application: Sorting of brominated plastics in D3E streams Sorting of metals Sorting of wood, glass, and PVC for the production of RDF (Refuse-Derived Fuel) Sorting of organic waste

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Bedpfx Aqszrh D Sogewr Option to start the machine on-site.

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover Bwedpfoyzc D Uox Aqgjr - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Bedpszdzifjfx Aqgswr Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: ready for operation (used), CTX125 X-RAY system control unit, used, normal signs of wear, 100% functional, scope of delivery according to photos Bwedpfjl Ech Tex Aqgjr

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Bedozhw S Ropfx Aqgewr

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI Bwjdpfx Ajzhwvpoqgjr History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Bjdpfxox Hqnrs Aqgewr Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: used, Year of construction: 1980, For sale: Bwodpfx Aqozguh Tsgjr Meat X-ray machine by SELO ANYL-RAY CORPORATION, 1980; USA; Model No. 316-3; Serial No. 1202; VOLTS 220; AMPS 1.0; 50Hz; Net price: 500 EUR

Condition: good (used), functionality: fully functional, X-ray with a rejector Brand Cintex Model Sentry XR Bodov Ucqpepfx Aqgjwr Dimensions 1900x950x1550mm

Condition: like new (used), Ishida x-ray machine is in great condition. It's hardly been used. It has come direct from a major food manufacture. Bodpfsy A Rh Rsx Aqgswr

Year of construction: 2014, condition: used, Manufacturer: Mettler Toledo Model: ADV3BF Year: 2014 Type: X-ray detector Power supply: 230 V Power: 2.3 kW Weight: 460 kg Conveyor length: 150 cm Conveyor belt width: 30 cm Product height allowed : 5 cm (adjustable) Product input : Flange DN 20 / Ø ext. 235 mm (removable) Height with flange: 1505 mm Height without flange: 1225 mm Product output: 380 mm and 700 mm Bsdpfx Ajx R D Aqjqgowr

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Bjdsy Ra D Ropfx Aqgjwr

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system Bwedpfxoy Ath Hs Aqgjr

Condition: like new (used), AdvanChek X-ray system (ADV 3) for inspecting packaged food and pharmaceutical products/materials. X-ray scanning for the detection of contaminating foreign bodies such as metal, glass, stones, bones, ceramics, certain plastics and rubbers, etc. Single-lane installation with an opening size of 360mm x 200mm (entry and exit). Conveyor speed: 10 - 60 m/min (depending on product dimensions). Screen display: 10.1" capacitive touchscreen (16:9 aspect ratio). X-ray display: 300mm or 400mm diode size – 0.4mm or 0.8mm. Bsdpsyufdcofx Aqgowr

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10003426, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Bwsdpfx Asyfgzksqgor Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Bjdpfx Aqey Akczjgswr Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: good (used), Helmut Fischer XDL-XYmZ X-ray Fluorescence Analyzer For sale is a professional X-ray fluorescence (XRF) analyzer from Helmut Fischer GmbH + Co, model XDL-XYmZ. Power: 120 W Voltage: 230 V / 50–60 Hz Model number: XDL-XYmZ Made in Germany This analyzer is ideal for precise material analysis in laboratories, quality control, and industrial environments. Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Bsdpfx Aqjxltm Eogowr Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system L900xW920xH1825 mm; weight: 350 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bwodpfsv Nm Insx Aqgor

Year of construction: 2025, condition: new, X-ray inspection system especially for tin cans and plastic containers, jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 200 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: vertical scan; conveyor belt height: 900 ± 30 mm; conveyor speed (dependent on product dimensions): 10 –60 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L2000xW1300xH2060 mm; weight: 650 kg. Bwodpfxjv Nm I Ue Aqgor Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.