Used Cnc Profile Grinding Machine for sale (94,163)

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany X-Axis: 1200 mm Y-Axis: 0 mm Z-Axis: 1000 mm Table Diameter: 2500 mm Workpiece Diameter: 2640 mm Grinding depth: 80 mm Machine length: 11000 mm Machine width: 6585 mm Machine Height: 5200 mm Clamping Length: 375 mm Max. Dia. Of Grinding Wheel: 400 mm Credpfx Ahsxmfbks Uji Max. Table Load: 40000 kg Grinding Wheel Width: 80 mm Grinding spindle - speed: 600 bis 6000 RPM Machine weight: 200 kg Feed rate X-axis: 00 mm / min Feed rate Y - axis: 5000 mm / min Table Rpm: 4,5 min-1 Clamping diameter max.: 350 mm Milling cutter diameter max.: 2800 mm Milling cutter arbor cone: HSK-B160 Swivel range milling head: ° Distance between cutter and workpiece: 615 / 1600 mm Axial: 4000 mm / min Radial: 00 mm / min Tangential: 00 mm / min Feed rate Z - axis (mm/min):: 6000 (mm/min) Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Codpfxjxivbmj Ah Uori

Condition: good (used), Year of construction: 2001, Z&B Starline 500 CNC surface and profile grinding machine year of manufacture 2001 Siemens 840D control x, y, z 600 x 380 x 250 mm magnet 500 x 250 mm ball screw for the x-axis Cjdpfewz N Elox Ah Uori grinding wheel max 350 x 50 mm variable grinding wheel speed TAW table dresser paper band filter 6x grinding wheel and flange documentation

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Csdpfx Ahoxfknas Ueri

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS 1984 Crjdpfxep R Rm Io Ah Uji

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, CNC surface grinding machine and profile grinding machine Elb Grinding length 600 mm Grinding width 400 mm Grinding height 475 mm Table load 650 kg Table clamping area 960x 400 mm Longitudinal table stroke up to 700 mm Vertical feed max. 1200 mm / min. Resolution 0.001 mm Cross travel max. 370 mm Cross feed max. 1500 mm/min. Incremental position measuring system, glass scale Resolution 0.001 mm Credpfx Aovt Rbaoh Usi CNC CONTROL UNIcon "U" Further technical data on request

Condition: new, Experience unmatched precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in semi-automatic and CNC versions. With a grinding diameter of 300-1000mm, you have endless possibilities. Some machines are available from stock! Discover our extensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in ROBBI's years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines with grinding length up to 2m (further models available upon request): TECHNICAL MAIN DATA: Model Omicron CNC 60 or semi-automatic series Grinding diameter 595/695 mm Grinding length 1000 - 3000 mm max. workpiece weight between centers 1200 kg TECHNICAL MAIN DATA: Model Omicron CNC 36/32 or semi-automatic series Grinding diameter 320 / 355 / 455 mm Credpfxegay T Dj Ah Uji Grinding length 630 - 2030 mm max. workpiece weight 120 (250/300 opt.) kg CONVENTIONAL MACHINES: TECHNICAL MAIN DATA: Model Omicron E Series Grinding diameter 360 - 430 mm Grinding length 630 - 1530 mm Workpiece weight between centers 200 - 300 kg ACCESSORIES (EXAMPLE FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tank Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the fabric table Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in axes: X and Z Optimized cycle with geometric and operational parameters - CNC grinding machines meet the requirements for producing medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required production type. - High-precision machining can be carried out when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for knowledge of ISO programming. The input of parameters is facilitated by a series of messages and symbols that explain the meaning of the different parameters step by step. Programming of work cycles is done by entering the same cycle parameters. The order of execution of the various cycles can be changed quickly and intuitively. By the way, in addition to affordable new machines and tested used ones, you can expect more from us: • Consultation and problem-solving on-site at your location • Organization of transport of your machine to your factory • Installation, assembly, commissioning, and operational handover and more.

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Cedjvygwwopfx Ah Uori Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Crjdpfxjtximvj Ah Uji Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Robotic, Complete-CNC Control Panel : Beckhoff CNC Movements : Z1-Axis, Z2-Axis, Workpiece clamping Feeding : Stäubli robot arm for loading, unloading and aligning Automatic Grinding Cone Dressing : Included Credpfx Ahsu Nmi Nj Uoi Automatic Compensation After Dressing: Included Indurstry 4.0 Compatibility : Available Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Non-Stop Production: Achieve continuous production with robotic arm feeding, automatic dressing, and automatic compensation features, eliminating the need for constant operator oversight. Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use Complete-CNC Control Panel: Utilize a full CNC control panel that allows you to control all axes of the machine, manage robotic feeding, and perform automatic dressing with the Beckhoff control panel. Easily save all grinding programs and monitor machine working times, efficiency, and errors. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex A-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors for mass-production. Additionally, the Zentroflex A-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. With 6-Axis robot arm and servo motors on all axes of the machine, Zentroflex A-series center hole grinding machines operate completely autonomously. All loading and unloading operations are performed by the robot arm. All axis movements of the machine are also performed autonomously with servo motors. Cone dressing and compensation are also performed automatically. All movements and measurements of the machine are performed from the CNC control panel. Contact us for more details.

Condition: new, :Omicron CNC 3206 | Omicron CNC 3210 grinding diameter:315 mm grinding length:600|1000 mm centre height:160 mm swing over bed:315 mm max. workpiece weight:120 kg grinding headstock:_____ __ grinding wheel size:450 x127 x min.20-max.50 mm grinding spindle speed:600-1600 (stufenlos) 1/min feed per revolution of handwheel:0,001/ 0,01 / 0,1 mm grinding head swivellable +/-:±180 ° automatic feeds:0,2-3000 mm/min workhead:_____ __ workhead - spindle speed:0-600 (stufenlos) 1/min swiveling workpiece drive:±90 ° workhead - center taper:4 MK tailstock:_____ __ tailstock quill adjustment:50 mm tailstock quill diameter:70 mm taper in tailstock:4 MK table:_____ __ table speeds:1-5000 mm/min swivellable angle of table:+9°/-5° | +8°/-4° ° table adjustment - longitudinal:680|1080 mm motors:_____ __ grinding wheel motor:4 kW workhead motor:0,75 kW hydraulic motor:0,75 kW coolant pump:0,18 kW machine dimensions:_____ __ weight of the machine ca.:3700 | 4900 kg Machine size (LxWxH):2900x1350x1750 | 3700x1350x1900 mm CNC controller:Siemens 840 dsl complete cooling system:mit Auffangbecken für Kühlmittel Scales:X-Achse Credpfx Ahod Ed S Io Uoi ball screw in axes:X und Z :montiert auf dem Reitstock (ohne Diamant) Telescope cover for guideways:für den Tisch aus Stoff machine lubrication:5l für die Schleifspindel hydraulic unit:zur Steuerung des Reitstockpinolenhubs

Condition: new, Year of construction: 2025, center height: 160,200,250 mm, workpiece weight (max.): 750 kg, grinding length: 100,020,003,000 mm, grinding wheel diameter: 500,600 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill stroke: 50 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 1,400 rpm, warranty duration: 24 months, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Cedpfxopy A Iuo Ah Ujri Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Crjdpfspy A Iqjx Ah Uei Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200

Condition: ready for operation (used), Year of construction: 1988, operating hours: 20,231 h, functionality: fully functional, machine/vehicle number: 2080, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 80,000 rpm, workpiece weight (max.): 300 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid commits the buyer to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 200 mm Travel Z-axis: 250 mm Maximum spindle speed: 80,000 rpm Distance between column and spindle: 340 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Adjustment range X: 400 mm Adjustment range Y: 250 mm Adjustment range W: 450 mm Adjustment range Z: 120 mm Adjustment range U: 6/20 mm Table dimensions: 600 x 380 mm T-slots included: 6 Width of T-slots: 10 mm Distance between T-slots: 50 mm Maximum table load: 300 kg Max. taper grinding: 16 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,500 x 3,000 mm Total weight: 7,000 kg Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Connected load: 7.5 kW Cjdpfxjxm Rq De Ah Ujri Operating Hours Grinding hours: 20,231 h Power-on hours: 49,158 h EQUIPMENT SAV magnetic chuck (300 x 150 mm) Lista double workshop drawer cabinet Abrasives High-frequency grinding heads up to approx. 80,000 rpm

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min Codpfxswv Havs Ah Usri - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of Cedpfx Aexuv Udeh Uori delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2001, condition: good (used), table diameter 200 mm Crsdpott Tb Djfx Ah Uoi workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: excellent (used), Year of construction: 2008, grinding diameter 350 mm grinding length 800 mm centre height 175 mm Crjdpext Uvdefx Ah Uji swivability of the grinding head -15 / +195 ° weight of the machine ca. 4 t

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Cedpfxsxtpnzs Ah Ueri Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Codpjwp E Rgefx Ah Ujri Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Crodpfx Ajwvgidoh Uji Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Year of construction: 2019, condition: excellent (used), Machine capacity CAPACITIES · Height of centre points Max. diameter for cylindrical grinding Distance between centres Max. length for cylindrical grinding Max. workpiece weight without steadies | Metric | |---|---| | 335 mm | | 450 mm | | 2150 mm | | 2100 mm | | 260 kg | TECHNICAL DATA Metric GRINDING SPINDLE UNIT Cylindrical grinding spindle 1: Electric spindle Max. grinding wheel dimensions: 610 × 50 × 203.5 mm Peripheral speed of grinding wheel: 30 - 125 m/sec Max. grinding spindle speed: 4420 min⁻¹ Cylindrical grinding spindle 2: Electric spindle Max. grinding wheel dimensions: 350 × 20 × 127 mm Crjdpfx Aoxr I Anjh Uoi Peripheral speed of grinding wheel: 70 - 110 m/sec Max. grinding spindle speed: 6000 min⁻¹ X & Z AXES X & Z axes movement: ball screw X-axis traverse path: 460 mm X-axis speed range: 0-5000 mm/min X-axis resolution: 0.0001 mm Z-axis traverse path: 2590 mm Z-axis speed range: 0-5000 mm/min Z-axis resolution: 0.0001 mm B AXIS Swivel angle: 0 - 180° Type: automatic via torque motor C AXIS Workpiece speed range: 0-750 min⁻¹ Coupling type: headstock and tailstock TM 5 Tailstock sleeve diameter: 80 mm Tailstock sleeve stroke: 80 mm Tailstock adjustment accuracy: +/- 200 μm EQUIPMENT DETAILS GRINDING WHEEL DRESSING DEVICE Type: dressing station with fixed points for cylindrical grinding + electric spindle for diamond dressing roll COOLANT SYSTEM Type: magnetic separator and filter paper Flow rate / output: 50-200 l/min Tank capacity: 2000 litres Pump pressure: 5-20 bar OIL MIST EXTRACTION UNIT Volume flow / exhaust quantity: 2000 m³/h Max. power: 2.3 kW CNC CONTROL Brand: Siemens Model: Sinumerik 840 SL Unit system: metric MEASURING SYSTEMS FOR X & Z AXES Type: linear encoder

Condition: used, Year of construction: 2006, grinding diameter 250 mm Cjdpfxoxrvmno Ah Usri grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Cedpfx Ahedgk H Ao Ujri Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Used CNC cylindrical grinding machine Make: FORTUNA Type: T23 S1000 ASW 45 CNC Year of manufacture: 1980 Crodpfxov Eyr Ss Ah Uji