Used Cnc Gear Grinding Machine for sale (70,122)

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Ppjdpozg Iq Isfx Aqvow

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo. Pjdsyucd Hspfx Aqvepw

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Pedpfx Aoyfnlkeqvopw Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Ppjdpozgvlysfx Aqvow

Year of construction: 2007, condition: used, machine/vehicle number: 203229 0807, This G-H grinding machine, a CNC surface grinder, model FS 420 SC, is being auctioned off online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - BGA - workshop, including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. Ppodjzp Dfaspfx Aqvew You can find this and many other items on our platform.

Condition: used, This G-H grinding technology – CNC surface grinding machine, model: FS 640 SD – will be auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology location – including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. Pjdpozp Dd Aofx Aqvspw You can find this and many other items on our platform.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, CNC cylindrical grinding machine Lizzini IG-FL Year of manufacture: 2019 Condition: Absolutely like new Control system: Siemens 840D sl Equipment: - 2 external grinding wheels - 1 internal grinding attachment with C-axis and fully controlled B-axis Distance between centers: 1000 mm Ppsdpfx Aqozmhumjvow Distance between centers (vertical): 200 mm

Condition: excellent (used), FANUC Power Mate control Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories MARCELS MASCHINEN CH Ppjdpfx Ajyla Nuoqvow

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAchine in very good condition. Grinding length 600 mm Grinding width 400 mm Grinding height 375 mm Pjdpfx Aezlguveqvopw Table loading 600 kg Axe X 10 - 650 mm Axe Y 140 - 525 mm Axe Z 400 mm Axe C - grinding spindle speed 1 000 - 3 180 rpm Grinding wheel (standard) 300 x 50 x 76,2 mm

Year of construction: 1991, condition: good (used), Ref. -No.: 10656 Manufacturer: PFAUTER Type: PE 150 Year of construction: 1991 Type of control: CNC Control: Sinumerik 840 Storage location: Halberstadt Pjdpozkpx Usfx Aqvopw Country of origin: Germany Turning Speeds: 150 - 600 RPM Tool Taper: SK 40 Machine length: 4700 mm Machine width: 3600 mm Machine Height: 2800 mm Weight: 8 t Workpiece Diameter: 150 mm Maximum tooth width.: 150 - 200 mm Table diameter: 160 mm Table drilling: 63 mm Max. cutter diameter: 130 mm Max. cutter length: 220 mm swivel angle: +/- 45° Further information: - The machine has been completely converted to Siemens 840D, including the motors and control cabinet. - The milling head was completely overhauled by Pfauter in 2013. - The low-voltage system and magazine conveyor are included. - It is equipped with a deburring station. The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. Psdpfx Aqst Hwqqsvopw * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Pedpfx Aqst Hwniovjpw Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Ppodet Hwxhspfx Aqvew Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm Pjdpet Hwu Aefx Aqvjpw gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm Ppodpfxet Hwyfj Aqvsw gear width 180 mm total power requirement 12 kW weight of the machine ca. 7500 kg

Year of construction: 1996, condition: ready for operation (used), Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible. Ppsdpfx Aqjzpa Scevow

Condition: good (used), Year of construction: 2002, functionality: fully functional, X-travel 450mm, Z-travel 200mm Pedpfxsy Ix Ezs Aqvopw exhaustion device, extinguishing system, without coolant device weight ca. 4000kg

Condition: excellent (used), Grinding range 800 x 600 x 500 mm Wheel diameter 400 mm Ppodpfx Ajr Ezfwsqvsw Magnetic plate 800 x 600 mm Automatic dresser Automatic balancing device Misc.accessories MARCELS MASCHINEN CH

Year of construction: 2013, condition: ready for operation (used), A CNC external cylindrical grinding machine Roweig requiring repair is available. Center height: 310mm, max. swing diameter: 600mm, max. grinding length: 1410mm, max. clamping length: 1500mm, max. grinding diameter: 600mm, max. workpiece weight: 500kg/120kg. Workhead speed: 500rpm, spindle taper: MT6, center point: MT5, swivel angle: -30°, tailstock cylinder compensation: +/-0.15mm, scale division: 0.001mm, max. dressing relief: 25mm, table speed: 10m/min, max. table travel: 1680mm. Wheelhead travel: 600mm, infeed speed: 10m/min. Grinding wheel dimensions X/Y/Z: 630mm/100mm/304.8mm, power: 11kW, max. speed: 50m/s, grinding spindles: 2, workpiece swivel angle: -30°/195°, spindle setting angle: -30°/15°. Machine dimensions X/Y/Z: approx. 5250mm/2450mm/2200mm, weight: approx. 7500kg, control: Siemens Sinumerik 802D sl. Spindle cooling defective. Documentation available. An on-site inspection is possible. Ppedpezmylqefx Aqvjw

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc Podpfx Aqex Av Adsvspw - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 1997, Technical details: Ppsdpfxox Aq Egs Aqvjw max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg Pedpfx Aezgw I Neqvspw with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories *

Year of construction: 2009, condition: ready for operation (used), A G+H precision cylindrical grinding center is available. Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, X/Z feed rate: 8m/min, workhead taper: MT4, tailstock quill stroke: approx. 35mm, tailstock taper: MT4, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm, max. speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. grinding wheel diameter: 100mm, filter capacity: 300l, filter flow rate: 100l/min, chuck: three jaw chuck, chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg, operating hours: approx. 350h. Including chuck, magnetic fixture and dressing unit. Documentation vorhanden. An on-site inspection is possible. Psdjzlt Ntepfx Aqvjpw

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm Psdpezd Hgisfx Aqvopw grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: good (used), Year of construction: 1989, CNC Surface Grinding Machine Machine type: Elb Schliff SWDE 012 NPC-K Year: 1989 Pjdpfezi Antox Aqvepw SPECIFICATIONS max. grinding length: 1.500 mm max. grinding width: 900 mm max. Arbeitshöhe mit neuer Schleifscheibe: 800 mm max. Arbeitshöhe bei abgenutzter Scheibe: 880 mm Max. workpiece weight: 1.000 kg statisch kg Max. Table Load: 1.500 kg/m dynamisch kg grinding wheel-Ø: 500 mm Grinding wheel width : 100 mm Table size: 1.500 x 740 mm Equipment paper band filter Nassschleifeinrichtung EL.-Geraden-Abrichtapp Querklemmung grinding spindle taper: Konus 75 magnetic plate: 1.500 x 900 kein Rundtisch