Used Hydraulic Machine Vise for sale (90,185)

Condition: ready for operation (used), jaw width: 100 mm jaw height: 41 mm span width: 160 mm total height: 127 mm Gbodpfxsd Hurfj Ag Tsg

Condition: used, Demanders hydraulic vise, Gsdpfxov Rnwme Ag Tjbg

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment Gbedpsx Hqnlefx Ag Tjg • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: used, machine/vehicle number: SKBE48S338KE1xxxx, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 18968 Specifications: - 2010 model - 3 axle - Tires (see pictures) - Hydraulic driving bridge - Width: 255 cm - Ready for delivery Description: Everything works as it should according to the previous owner. Ready for delivery Gbodjvgz Aujpfx Ag Teg Technical approved: Yes EU-approved until: 20.10.2026 Own weight: 9460 Total Weight: 48000 Payload: 38540 Width: 255 Length: 1340 Model: Maskinhenger m/ Hydraulisk kjørebru

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Gjdpfjx D Ea Uex Ag Tjbg Machine Length 470 mm Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Gsdpfx Ajx Srwfog Tobg Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg New - unused

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Gbjdpfx Aov Upvrog Tsg

Condition: good (used), machine vice, stable vice, drill press vice, drilling vice Gbsdpfxeu Npfmj Ag Tog -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic Gbjdpfjvgbgaex Ag Tjg 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, machine/vehicle number: YY9SE51MX9T01xxxx, Year of construction: 2009, Please contact ATS Norway for more information Please provide reference number upon request: 20343 Specifications: - 2009 model - 3 axles - Lift on 1 axle Gedpewi Rlisfx Ag Tjbg - Friction steering on 3 axles - Lashings - Ready for delivery Description: We have a 2009 Damm SE-51M 3 axles Machine trailer w/ hydraulic driving bridges for sale. The trailer is Eu-approved until 02.09.26 and can be put straight into production. It works as it should according to the owner. Ready for delivery. Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 9750 Total Weight: 51000 Payload: 41250 Width: 255 Length: 1360 Model: SE-51M 3 akslet Maskinhenger m/ hydrauliske kjørebroer

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Gedpfxsx D Ea Ij Ag Tobg Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Hydraulic cutting head Electric desk Adjustable cutting length stop Gsdpfx Agjhymkwo Tobg Manual

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW Godpfex Sxx Aox Ag Tjbg - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Year of construction: 1994, condition: ready for operation (used), Immediately available ex location Hydraulic folding machine ONISMA (Spain) Model: P 3 x 10 Godpfxox Rxqij Ag Tjbg Year of manufacture: 1994 Working length: 3050 mm Material thickness up to 10 mm Drive power: 15 kW Weight: 9 t Bending tools renewed in 2024. Price: EUR 7,500 plus VAT ex location

Condition: new, Year of construction: 2025, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. Gedpfxjvvk Aio Ag Tebg To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: used, machine/vehicle number: SA9FT3A50MH17xxxx, Year of construction: 2021, Please contact ATS Norway for more information Gbedpfx Ajwvy Rzog Tog Please provide reference number upon request: 20727 Specifications: EU-approved until 07.05.2026 Model year: 2021 Tires: See photos Hydraulic loading ramps Manual widening Length: 1,095 cm Width: 254 cm Axle distance: 514 / 136 cm Curb weight: 7,000 kg Tool compartment included Description:EU-approved and ready for immediate operation.Equipped with hydraulic loading ramps and manual widening.Available for quick delivery. Technical approved: Yes EU-approved until: 07.05.2026 Own weight: 7000 Total Weight: 28000 Payload: 21000 Width: 254 Length: 1095 Model: m/ hydrauliske kjørebruer

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Gsdpjx D I Uujfx Ag Tsbg Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Gjdpfx Agsx N Dwfe Tsbg Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Gjdsd Hxx Aspfx Ag Tjbg Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: used, machine/vehicle number: VS94NTRGSMA86xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Gjdpfx Ajxm S Udog Tobg Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 40 mm Godpfx Agsx D Hxlo Tobg This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 1480 Measurements depth 4970 mm Measurements height 2160 mm Machine weight 8000 kg Injection Unit Gbsdpfx Aex D Etheg Tsg Screw diameter 55 mm Shot weight 476 g Stroke volume 523 cm³ Injection pressure 1904 bar Screw speed 196/280 1/min Clamping Unit Clamping force 1500 kN Opening stroke 600 mm Distance between bars 500 x 500 mm Size of mold platens 780 x 790 mm Ejector stroke 150 mm Ejector force for / back 22/11 kN This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 770 Measurements depth 2045 Measurements height 2030 Machine weight 3150 Gbodpfxjx R E R No Ag Tjg Main Drive Punching force 115 tons Main motor power 11 kw Additional Equipment Dual-cylinder hydraulic system Easily interchangeable punching tool One set of punching tools included Angle cutting shear Flat bar shear Notching tool Rod cutting tool 1000 mm electronic back gauge Foot pedal with emergency stop on both sides Delivered with one set of Ø26 mm punch and die This HILALSAN HKM-115 was manufactured in 2022. A robust hydraulic shearing machine, it's ideal for those looking to get high-quality shearing capabilities. Contact us for more information. Application Types Shearing

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Dimensions Gbodpfox Nkpuox Ag Tjg Machine Length 5000 mm Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1195 kN This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Gbjdpfx Agjx Nr Tns Tsg Injection Moulding