Used Hydraulic Machine Vise for sale (70,922)

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp Kdsdpfodpvwisx Ab Tsh -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Condition: good (used), machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm Kodpfx Abovvg Uhs Tedh -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

Condition: used, milling machine vice, hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power vice, NC power clamping vice -Manufacturer: Röhm, hydraulic vice with rotary table -Type: RB 135 -Clamping jaws: 135 x 40 mm -Clamping depth: 150 mm -Dimensions: 470/260/H150 mm -Weight: 47 kg Kodpfsu Rv R Sox Ab Tsdh

Condition: used, Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open Kodog Td E Sjpfx Ab Tsdh -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Condition: used, Machine vise, sturdy vise, drill vise Kodpfx Asfldb Tob Tjdh -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 160 x 45 mm -Clamping depth: max. 260 mm -Tension: centric -Dimensions: 590/200/H125 mm Kdodpfx Absfxg N Uo Tjh -Weight: 36 kg

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 45 mm -Clamping depth: 195 mm -Dimensions: 500/160/H135 mm -Weight: 30 kg Kdsdpogtd Ddefx Ab Toh

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm Kjdpfedpvwhsx Ab Todh -Dimensions: 550/200/H125 mm -Weight: 47 kg

Condition: used, Machine vise, sturdy vise, drill vise Kdedehhf Aijpfx Ab Teh -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 40 mm Kdjdpjx D Hxljfx Ab Teh This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm Kdedpfsu Npfmex Ab Toh -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Ksdehymkwepfx Ab Todh Hydraulic cutting head Electric desk Adjustable cutting length stop Manual

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 290/02, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 Kdsdpeyghhhofx Ab Tsh • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: used, Hydraulic machine clamps with Enerpac hydro-pneumatic unit. The clamps have a jaw width of 150 mm. The jaws are interchangeable, allowing you to make your own jaws. For better photos, please visit our website. Special price: 1500,- Kedpfxsgbdzcs Ab Tedh

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Dimensions Machine Length 5000 mm Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1195 kN Kdjdpfx Absx Nkpuo Toh This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% Kjdex Nr Tnspfx Ab Tsdh This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: new, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, bending angle (max.): 190 °, bending radius (max.): 250 mm, mandrel length: 2,100 mm, overall weight: 420 kg, total length: 2,400 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3.7 kW (5.03 HP), pressure (min.): 50 bar, pressure (max.): 220 bar, Equipment: CE marking, emergency stop, foot remote control, MBB 32 PLC – Hydraulic Mandrel Tube Bending Machine The MBB 32 PLC is a hydraulically driven tube bending machine specifically designed for mandrel tube bending applications. Its internal mandrel-supported bending system delivers precise, repeatable bends without cross-section deformation. This machine is engineered exclusively for tube bending applications, not for profile bending. Thanks to its PLC-controlled design and hydraulic clamping system, it is ideally suited for mass production and precision work. Standard Features - 1 set of mandrel tube bending dies in requested dimensions Kdedpfjyghlyox Ab Tsh - Specially designed, direct-drive, gear-reduced bending system - 4.7” TFT touchscreen - Portable foot pedal with emergency stop - 100 program memory - Sequence of 10 bends per program - Hydraulic clamping system - High-precision tube bending thanks to braked motor - Manual back gauge device - Support roller - Safety interlocked electrical panel and safety switch - Overload protection - Electrical supply: 380 V / 3 Ph / 50 Hz - CE certified Optional Features - Additional sets of mandrel tube bending dies in desired sizes Technical Specifications – MBB 32 PLC - Max. Tube Outer Diameter: Ø32 × 3 mm - Max. Bending Radius: 250 mm - Max. Bending Angle: 190° - Hydraulic Pressure: 50 – 220 bar - Working Length: 2100 mm - Total Motor Power: 3.7 kW - Tank Capacity: 20 liters - Machine Dimensions (L × W × H): 2400 × 1200 × 1100 mm - Weight: 420 kg Areas of Application - Mandrel tube bending operations - Automotive sub-industry - Furniture and metal frame systems - HVAC and installation piping - Industrial metal tube production Production Note: This machine is manufactured by CRONOSSTECH in Turkey.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Kdedpfxjx D Dkxo Ab Tjh Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, operating hours: 72,069 h, Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5500 kN This Engel CL 4550/550 was manufactured in 2003. It features a screw diameter of 90mm, a closing force of 5500kN, and an opening distance of 700mm. Mold installation height ranges from 250mm to 850mm, and the plant size is 1200x1200mm. Includes a robot but excludes water temperature control equipment and conveyor belt. Contact us for more information about this machine. Kdjdpjx D Ebljfx Ab Toh Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Ksdjx D Nc Hepfx Ab Tjdh Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Kdodpfxjx D Ecvo Ab Teh Clamping Unit Clamping force 2500 kN This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, - Pressing force 25 t - Throat depth 750 mm - Max. punching diameter 110 mm - Hydraulic tool clamping - Stroke adjustment with digital display - X / Y with digital display Kdodpfx Absx Tvhwo Toh - Table size 1600 mm x 1050 mm - Weight approx. 2000 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm Kdedpfx Ajx Sxx Aeb Teh - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) Kdedpfx Aju Ibuksb Toh - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment Kdedox D N Sbopfx Ab Tsh The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding