Used Hydraulic Machine Vise for sale (73,068)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display Nlodpfxexph E Re Akaoc - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Nodpfx Aoytr Rmekajlc Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Isitan Hydraulic 4-Roll Round Bending Machine 4R HMS 2050x200 2 Speeds Top and bottom rolls driven Hydraulic side roll adjustment 3 Digital displays Hydraulic folding bearing Hardened rolls Tapered bending device Separate control panel Useful length: 2050 mm Top roll diameter: 200 mm Side roll diameter: 180 mm Total motor power: 5.5 KW Working speed: 3 m/min. – 6 m/min. Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending performance data 10 mm at the smallest inner diameter of 1000 mm (5 x top roll) 8 mm at the smallest inner diameter of 300 mm (1.5 x top roll) Edge bending performance data 8 mm at the smallest inner diameter of 1000 mm (5 x top roll) Njdpjh Ar Duofx Akaelc 6 mm at the smallest inner diameter of 300 mm (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 - ST 42 structural steel)

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven Nodpfx Akjd Ab H Reaelc - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Nedpfxsd Acazo Akaelc

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Technical specifications: - Steel construction welded frame Nedpfeh Alicox Akajlc - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD Nledpoh Alh Rsfx Akajc - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Nljded Ab H Sjpfx Akajc Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Nedpfx Aod Ab H Tokaslc Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Nodpfx Ajh Alh Uokajlc Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, functionality: fully functional, Year of construction: 2014, New and unused Adjustable hydraulic pump Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Nedpfx Akow H Ad Eoajlc Pressure: 270 bar Power: 132 kW

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Nsdpex Dtt Aefx Akaslc Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: used, jaw width 200 mm jaw height 67 mm span 325 mm span adjustable in three steps Nodpfjc Tcgcsx Akaslc construction height 165 mm space requirement length - 800 x width - 300 x height - 165 mm weight approx. 116 kg

Condition: used, jaw width 200 mm with specal jaws jaw height 67 mm span 325 mm span adjustable in three steps construction height 165 mm space requirements length - 800 x width - 300 x height - 165 mm Nedpfxsc Tcgbo Akaolc weight approx. 118 kg

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Njdpfx Akoyg Euljaslc Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, For profesional use. Easy to clean and maintain Simple to use For different filling nozzles, fi 14,20, 30 und 36 mm Folling speed control Knee activation Fast return stroke Easy to move due to attached casters Additional equipment: Burger making nozzle, PVC Balkan sausages making nozzle Nledpfx Akopxm E Aoasc PH 25 cylinder 25 l, for 23 kg meat Dimensions: 530x520x1220 mm, weight 95 kg, 400V, 0,55 kW

Condition: like new (used), functionality: fully functional, total height: 150 mm, jaw height: 40 mm, clamping width: 160 mm, clamping range: 200 mm, clamping length: 200 mm, - Extremely stable and robust - pneumatic Nledpfx Aex Rp Ekskaec - barely used - 5 units available - New price over 5,000 euros

Condition: new, Year of construction: 2026, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Nlodpevvk Aisfx Akaoc Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: new, Year of construction: 2026, Claw machine lift with an impressive lifting capacity of 20 tons is an excellent tool for industries that require huge loads. Equipped with a robust design and innovative technical solutions, this claw lift ensures efficiency, safety and reliability in every application. The main distinguishing feature of the claw jack is its claw lifting mechanism, which allows for reliable and precise gripping of various objects. Thanks to this, handling large and non-formine loads becomes much more efficient, and the operator has full control over the lifting process. The lift with a lifting capacity of 20 tons is not only strength, but also protection against failures, it guarantees safe lifting and transport of heavy loads to high altitudes. The claw lift design has been carefully designed to ensure maximum stability during operation. The solid frame and durable materials make the jack cope with difficult industrial conditions while maintaining full functionality and reliability. To sum up, a machine claw machine lift with a lifting capacity of 20 tons is a powerful tool that will meet even the most demanding industrial tasks. Its impressive load-bearing capacity and precise claw mechanism make it an invaluable support in the area of lifting and moving large loads in a variety of working environments. Technical data: Maximum static load 20T Maximum lifting capacity at the head of the lifter 15T Maximum lifting capacity at the lifting foot 12T Minimum height (foot/head) 40 / 325 mm Nlodovvk D Hspfx Akajc The hight of raising 140 mm Screw pin adjustment 0-60 mm Net weight 68 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, working width: 2,080 mm, bending angle (max.): 145 °, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 9,000 kg, total length: 9,500 mm, total height: 2,100 mm, working length: 8,020 mm, DURA 8.3 hydraulic bending machine – for roofing and facade profiles. ✅ BMS multi-touch controller • Touchscreen • Intuitive bending design on the controller • Automatic calculation of bending sequences with graphical simulation • Convenient profile programming, transfer via Wi-Fi or USB • Archive of all previously used projects on the machines ✅ Design and functionality • Robust electric knife driven by a maintenance-free timing belt • Large amount of space for maximum design freedom for bent parts • Adjustable material support for additional feed • Adjustable clamping beam (adjustment to the appropriate material thickness) Nodpfx Aowm Ha Rskaelc • Adjustment of the initial setting separately for each arm • Pre-bending in the clamping beam for edge hemming • Removable clamping strip for the bending beam, 15x60 mm, 3 pieces • TAZ 1000 stop with an adjustment range of 30-1000 mm • 5 fingers of the stop, adjustable along the entire length of the device • Multi-functional foot pedal • Complete safety package

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. Nlsdpfx Akexflfmsajc The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees Nledjrbk Tfopfx Akaoc • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: excellent (used), mileage: 48,000 km, power: 163 kW (221.62 HP), first registration: 01/2010, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 8,930 mm, total width: 2,420 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electric window regulation, trailer coupling, = Additional options and accessories = - Front work lights - Remote-controlled central locking - Air-suspended seats - Sun visor = Notes = 4x2 Euro 5 Flatbed body, 6.85 m Load bed height: 92 cm Hydraulic ramp length: 2.65 m Dutch vehicle Valid MOT (technical inspection) until 15.01.2027 Only 48,000 km! In very good condition! Ready for immediate use. = Further information = Technical information Number of cylinders: 6 Engine displacement: 6,693 cc Front axle: Max. axle load: 4480 kg; Suspension: Leaf spring suspension Rear axle: Max. axle load: 8480 kg; Suspension: Air suspension Weights Unladen weight: 6,200 kg Payload: 5,800 kg GVW (Gross Vehicle Weight): 12,000 kg Functional Load bed height: 92 cm Maintenance, history and condition MOT (technical inspection): valid until 01.2027 Technical condition: very good Optical condition: very good Identification License plate: BX-HS-46 Njdpfx Akszd Sz Seaslc

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Manufacturer: Instron Model: 2527-113 / 104999 Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m Nodpfszgvrtex Akaslc If you have any questions or require further information, please feel free to contact us.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm Njdpfx Akey Nd Sisaslc turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.