Anchor drill rig buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1

Upright Drilling Machine OPTIMUM 508 VS 20

Mönchengladbach, GermanyGermany dealership location
6371 km
1995
used
bore capacity in steel (diameter):20 mm throat:210 mm bore stroke:150 mm spindle turning speed range:120 - 1600 U/min table:400 x 450 mm feeds:0,1 - 0,3 mm/U total power requirement:1,4 kW weight of the machine ca.:0,2 t dimensions of the machine ca.:1,0 x 0,8 x 1,8 m O2fc2kk more
3

Upright Drilling Machine KNUTH KSB 40B

Göppingen, GermanyGermany dealership location
6699 km
2008
used
bore capacity in steel (diameter) unbkt. mm throat unbkt. mm bore stroke unbkt. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 8brzrnio more
10

Drilling Rig Mounted on Mercedes truck Wirth B1A

Haaksbergen, NetherlandsNetherlands
6345 km
1993
ready for operation (used)
Year : 1993 Reverse circulation drilling up to diameter of 800 mm Ewke3gi equipped with reverse circulation pump Mast 6400 mm Pulsing winch500 kg Winch 3500 kg Drill pipes approx. 84 meter ( 28 x 3 meter) Atlas Crane AK 1402 equipped for reverse circulation / air lift drilling with external Copressor and double walled pipes ( option, not in scope!) Working hours are unknown but machine has not been in full operation and is in good condition. Mercedes 6 x 6 Truck type 2629 Year 19... more
6

Upright Drilling Machine BLUTHARDT 10BK

Willich, GermanyGermany dealership location
6368 km
1970
used
bore capacity in steel (diameter) . mm throat 450 mm bore stroke 350 mm table surface area 600x500 mm spindle diameter 100 mm Feed 0,06-0,63 mm/U 2qzitm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
bore capacity in steel (diameter) 25 (St 60) mm throat 280 mm bore stroke - mm table-size 500 x 400 mm thread capacity M 22/St. 60, M 27/GG 20 Cktegam73 spindle taper MT 3 bore slide stroke 500 mm turning speed range 160 - 1850 U/min feeds 35,5 - 71 mm/min rapid traverse 4,5 m/min distance spindle /table 185/685 mm total power requirement 2,9 kW weight of the machine ca. 0,6 t range L-W-H 1,10 x 1,70 x 2,25 m acc.: 2- drilling head, 2 pcs. 3-jaw chuck, coolant more
5

Upright Drilling Machine Schwill SO1

Solingen, GermanyGermany dealership location
6408 km
1958
used
bore capacity in steel (diameter) 13 mm throat 250 mm B920rcg bore stroke 100 mm boring chuck 1-13 mm table: 360 x 300 turning speed range: 225 - 1500 U/min more
8
BAUER BG 24H BT75D DRILLING RIG - year of production 2016 - mileage only 3 400 mth! - engine power 298 kW / 405 HP - maximum weight 75 000 kg - pull force 330 kN - maximum diameter 1700 mm - maximum drilling depth 58 m - total height 21.9 m - 1 owner - very well maintained - 100% without any accidents Technical and visual condition - LIKE NEW! To this announcement applies Polish Law. This announcement is not an offer as articulated in Polish law, in particular Civil Code. Data co... more
1
 Start Chat

Optimum upright drilling machine type OPTI B 33 PRO SET Optimum Säulenbohrmaschine Typ OPTI B 33 PRO SET

Gerolzhofen, GermanyGermany dealership location
6680 km
good (used)
- NEW - Make optimum Type OPTI B 33 PRO SET No. 3003333SET - Robust Bench and column drills with belt drive - User-friendly safety switch for IP 54 with Undervoltage release and separate emergency stop impact switch - 400 Volt models with forward / reverse - Drill depth stop - Precision machined drilling table with diagonal T-slots Yruxak - Height adjustment of the drilling on rack - Drilling ± 45 ° tilt and 360 ° rotation - V-belt covering with safety switch - Die cast aluminum Pinolenhebel... more
3

Upright Drilling Machine WMW BK 50 A

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
1992
used
bore capacity in steel (diameter):50 mm throat:370 mm bore stroke:250 mm taper:V MK spindle speeds in 12 steps:32 - 1400 U / min. Vsddia 9 autom. feeds:0,11 - 0,32 - 0,90 :0,16 - 0,45 - 1,25 :0,22 - 0,63 - 1,73 mm/U mot. stroke of boring head, way:1390 mm sliced ground plate with 2 t-nuts:500 x 600 mm/min total power requirement:220/380 50 8 V Hz kW weight of the machine ca.:1850 kg dimensions of the machine ca.:1700 x 700 x 2800 m machine lamp: cooling system: 1 used box column drilling m... more
2

Upright Drilling Machine WÖRNER

Willich, GermanyGermany dealership location
6368 km
used
bore capacity in steel (diameter) 100 mm throat 450 mm bore stroke 550 mm Table area 600x800 mm faceplate 600 mm turning speeds 50-2000 U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Xtijtirh more


anchor dri...
daily

New machines via email!

Stay updated!
2

Upright Drilling Machine GILLARDON GSB 40 V

Metzingen, GermanyGermany dealership location
6677 km
1980
used
bore capacity in steel (diameter) 40/50 mm throat 350 mm bore stroke mm Boqmrags taper ISO 4 table length 630 mm table width 530 mm total power requirement 2,9 kW weight of the machine ca. t dimensions of the machine ca. m Pillar Drill with Infeed and Automatic Threading Device more
6

Drilling Rig CASE u. selbstbau CASE 1290

Haaksbergen, NetherlandsNetherlands dealership location
6345 km
1980
used
Drilling Rig mounted on CASE Tractor Case Tractor type 1290 YOM appr 1980 Suitable for Straight flush drilling down to 80 meters Y02a9l Approximately 80 meters drilling pipe are included in , length 1,5 meter and diameter 90mm Drillingheads - 1 x 190mm and 1 x 220 mm Pump type: Godwin Type CD 8085 more
8
BAUER BG 24H BT75D DRILLING RIG - year of production 2016 - mileage only 3 400 mth! - engine power 298 kW / 405 HP - maximum weight 75 000 kg - pull force 330 kN - maximum diameter 1700 mm - maximum drilling depth 58 m - total height 21.9 m - 1 owner - very well maintained - 100% without any accidents Technical and visual condition - LIKE NEW! To this announcement applies Polish Law. This announcement is not an offer as articulated in Polish law, in particular Civil Code. Data co... more
4

Hema drill upright Hema ZB 10

Berneckerweg 1A, 83671 Benediktbeuern, DeutschlandGermany
6862 km
2015
as good as new (ex-display)
For exact Winkelrechte holes Solid design Suitable for all drilling machines with euro neck recording 43 mm With adjustable drill guide from 8 / 10/12/14/16/18/20/22/24/26 mm Drill length of 320 mm Gwlq8hh8y more
1
 Start Chat

Optimum upright drilling machine type OPTI B 26 PRO SET (30576)

Gerolzhofen, GermanyGermany dealership location
6680 km
good (used)
- NEW - - Robust Bench and column drills with belt drive - User-friendly safety switch for IP 54 with Undervoltage release and separate emergency stop impact switch - 400 Volt models with forward / reverse - Drill depth stop - Precision machined drilling table with diagonal T-slots - Height adjustment of the drilling on rack - Drilling ± 45 ° tilt and 360 ° rotation - V-belt covering with safety switch - Die cast aluminum Pinolenhebel of one piece with soft grip handles - Solid, largely dimens... more
1

Burning plate / drilling rig FICEP GEmini 254 PG

Steinamangerer Str. 163, 7400 Oberwart, ÖsterreichAustria
7201 km
2009
ready for operation (used)
Workspace - (table) 15,000/2500 mm with zone extraction Bb93ixyvgt Section 5-80 mm, 8-32 mm, drill diameter milling of 33-60 mm 1 oxy-fuel burner, 1 plasma burner type hyper term HPR 260 x. Dust removal by Donaldson Torit DCE dust removal system using SCRIBING marking device more
1
4-sided cutter with access to Hang drill type 240-01 with 4 spindles Cutting line 3 or 4 possible Shaker Cl8fweqk more
3

Uprightdrilling machine Knuth SSB 40 F Super

OIching, GermanyGermany dealership location
6830 km
2016
used
Spindle: Speed 2.600 rpm Power 2 kW Taper MK4 Quill 190 mm In general: Clamping surface 540 x 440 mm Movement table (manual) 570 mm Movement table (motoric) 430 mm Distance spindle nose - table (max.) 665 mm Swivelrange table +/- 45° Bbdz0ocdh7 Equipment / Accessories Cooling: Cooling unit Lighting: Working area lamp Work safety: Protective shield more
8
BAUER BG 24H BT75D DRILLING RIG - year of production 2016 - mileage only 3 400 mth! - engine power 298 kW / 405 HP - maximum weight 75 000 kg - pull force 330 kN - maximum diameter 1700 mm - maximum drilling depth 58 m - total height 21.9 m - 1 owner - very well maintained - 100% without any accidents Technical and visual condition - LIKE NEW! To this announcement applies Polish Law. This announcement is not an offer as articulated in Polish law, in particular Civil Code. Data co... more
6
Weight: 16 tons Width: 3 m Bbb2hntpb3 Length: 6.5 m Engine: Deutz 8-cylinder Two-speed head, providing high torque for drilling large diameters. Maximum drilling depth up to 400 meters Large adaptability, depending on the retrofitting. Drilling rig after blasting, painted with sea paints. Filters, oils mentioned. The equipment is fully functional, DEUTZ engines, it fires without problems. The machine comes with a lighting mast (last photo). more
3

Drilling rig Nenok APS B 615 DR

Biebrich, GermanyGermany dealership location
6507 km
1997
used
Nenok APS B upgraded drilling rig, built in 2014, 2014 on Profiline 3 615 - DR, work area 600 x 450 mm, machine 3 axis has 5 times tool change, rolls measuring system, diameter 10-40 mm, machine dimensions with 3 spindle 5.5 kW, spindles with internal cooling, 4800 x 3500 x 3000 mm,. 83weyfvqa more
8
BAUER BG 24H BT75D DRILLING RIG - year of production 2016 - mileage only 3 400 mth! - engine power 298 kW / 405 HP - maximum weight 75 000 kg - pull force 330 kN - maximum diameter 1700 mm - maximum drilling depth 58 m - total height 21.9 m - 1 owner - very well maintained - 100% without any accidents Technical and visual condition - LIKE NEW! To this announcement applies Polish Law. This announcement is not an offer as articulated in Polish law, in particular Civil Code. Data co... more
4
Production year: 1989 Possibility of drilling wells for heat pumps, deep wells using the mud method up to 100 m Piston pump Winch with 100 m rope Wide tires 4 x 4 drive with bridge interlocks Ba2uandvzn Included: perches 3 m - 38 pcs, bites, suction device for the mud pump, probe distributor more
6
Brand, type, model WAMET SWK 200 Device type Caterpillar drilling rig Year 2008 Mileage read has not been established Serial Number 1 The mass of the same drilling rig 16 000 kg Engine output 123 kW Dimensions (L. X w. X h.) 7500 x 2630 x 3170 mm Operating temperature -10 to +38 ° C Drilling diameter 320 mm Drilling depth 30 m Manufacturer WAMET Sp. o.o. Gxseigt Poland Application: Caterpillar drilling rig SWK200 is used to make holes in the ground multidirectional using the following basic met... more
6
Serial Number 1 The mass of the same drilling rig 20 000 kg Engine output 123 kW Dimensions (L. X w. X h.) 12 3 000 x 060 x 4 000 mm Ftzxfc2 Operating temperature -10 to +38 ° C Spindle flight Æ125 Torque head main max. 3600 daNm Chassis 611 excavator Manufacturer WAMET Sp. o.o. Poland Application: Pile drilling rig (Tup) WAMET KPG - 14/60 is designed for driving of reinforced concrete piles, steel pipe or sheet piling into the ground G62, by using the hammer combustion or a free fall. It is al... more
1
Elect./Voltage: 208/230/440/480, 60 Cy, 3 Ph Bbu2y2rlt0 VERSAMAX FHD56C CNC EDM Drill (Hole Popper) -- Travel 23.6” x 19.7” x 17.7”. -- W-Axis travel 11.5”. -- Maximum workpiece dimensions 31.5” x 29.5”. -- Maximum workpiece weight 2,866 Lbs. -- Electrode size range 0.3mm – 3.0mm (0.0118" - 0.1181"). -- Approximate dimensions 6' x 5'6". -- Approximate weight 4,500 [...] with: -- 30 Amp power supply. -- Fully submerged operation. -- Integrate... more
6
MACHINE DATA WEEKE BHX 500 DRILL DD-20 CNC Machining T BHX 500 Serial# : 0-250-17-1159 Year of Mfg. : 2007 Condition : Very Good only few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Feed thru CNC P & P Router Vertical and Horizontal Borer Top and Bott... more
5
Number of drilling agregates:2 Stk. bore diameter:8 - 50 mm Eeeler2 Cutting system: weight of the machine ca.:12 t floor-plate width:220 - 2500 mm Plate thickness:6 - 60 mm floor-plate length:50 - 6000 mm workpiece weight:6000 kg Tool changer:2 x 6-fach boring spindle drive:26 kW rapid- return speed:10000 mm/min bore feed:0-800 mm/min drilling spindle positioning:30000 mm/min torch height adjustment:200 mm threading:M8 ? M30 Kaltenbach KF 2512 CNC Plate Processing Center The Kaltenbach KF ... more
4
Tool holder MK 4 Bcrqdcij0p Projection up to 1000 mm Car. Feed Motor-driven height adjustment more
6

Deep Hole Drilling Machine - special SIG BEM 82/05

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1984
used
Boring depth max. 500/475 mm bore spindle drive 3000 feed 20 - 400 mm/min Bf2i9coa lease refer to the pictures for further technical details. more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more
5

Pillar Drilling Machine IBARMIA B40

Dreieich, GermanyGermany dealership location
6568 km
1998
used
bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 61 - 1169 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 2,4 kW weight of the machine ca. 620 kg dimensions of the machine ca. 0,60 x 1,10 x 2,37 m threading device - [...]: 669 V - thread cutting device - automatic feed - rapid clamping boring chuck ROEHM Ø 1-13 mm 8pl3hmyrw - coolant equipment - ma... more
5

Beam drilling line Wagner WBX 1015

Köln, GermanyGermany dealership location
6416 km
1994
used
size of profile - max.:1008 x 302 Number of drilling agregates:3 Stk. bore diameter:10 - 40 mm Gvl0x0 Wagner WBX 1015 beam drill line for profile drilling in heavy steel construction. The beam drill line is controlled by a CNC control. The 3 drill axes are available with a tool changer with 5 tool positions each for the automatic tool change. A gantry type length measuring system is responsible for the profile length measurement. HSS oil feed drills ( inner collant drills) are used. more
4

Pillar Drilling Machine AUDAX 50 A

Bünde, GermanyGermany dealership location
6460 km
1970
used
bore capacity in steel (diameter) 50 mm throat 300 mm bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U total power requirement 1,47 / 1,84 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Vtj3jqbax Condition: ready for operation Electric 380 Volt Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1

CNC DRILL BROTHER TC-228

North Carolina, United StatesUnited States dealership location
518 km
1995
used
Elect./Voltage: Bbu7zraqot BROTHER TC-228 Drilling & Tapping Center -- Table 23.6” x 11.8”. -- X travel 16.5”. -- Y travel 11.8”. -- Z travel 9.8”. -- Rapid traverse (x & y) 1417 ipm. -- Rapid traverse (z) 1181 ipm. -- Tool changer 10. -- Tool change time 1.2 seconds. -- Spindle speed 10,000 rpm. -- Tapping speed 6,000 rpm. -- Spindle motor 5 hp. -- Spindle taper #[...] with: -- Brother CNC Control. more
3

Pillar Drilling Machine ERLO TCA40

Dreieich, GermanyGermany dealership location
6568 km
1986
used
bore capacity in steel (diameter) 40 mm throat 360 mm bore stroke 240 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 68 - 1270 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 1,6 kW weight of the machine ca. 730 kg dimensions of the machine ca. 1,00 x 0,95 x 1,42 m - [...] / 186 Yriayk - autom. feed - coolant equipment - machine lamp more
6

Drilling and Milling M/C ALZMETALL AC 28 cnc

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1991
used
bore capacity in steel (diameter) ? mm x-travel 450 mm y-travel 300 mm z-axis 180 mm weight of the machine ca. 1,4 t Mufo08 more
2

Radial Drilling Machine KOLB HKH

Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
bore capacity in steel (diameter):60 mm arm length:2000 mm workpiece height max.:1600 mm spindle turning speed range:28 - 950 U/min feeds:0,07 - 2,9 mm/U spindle taper MT:5 Gcm7pv0x8 total power requirement:13 kW weight of the machine ca.:6 t dimensions of the machine ca.:3,2 x 1,6 x 3,4 m - boring cube 800 x 600 x 600 mm - central clamping more
6

Drills Qualter & Smith QSR 4 Qualter & Smith QSR 4

Birmingham , United KingdomUnited Kingdom dealership location
5784 km
ready for operation (used)
QUALTER & SMITH QSR 4 Radial Dril Hi2dmgz9y Drilling Radius 1257mm, max dia drilled 40mm, speeds 60 -1750rpm more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbu7xoijcm CARLTON 1A RADIAL DRILL -- Column diameter 11" -- Arm length 4' -- Face of column to spindle 48" MAX / 9" MIN -- Taper in spindle #4 MORSE -- Spindle diameter 2-1/2" -- Spindle traverse in head 12" -- Horizontal traverse of head 39" -- Vertical traverse of arm on column 28-1/2" -- Min/Max distance spindle to base 14" / 53" -- Height of base 8" -- Working surface of base 36" x 54" -- Spindle speeds(12) 60 to 1,500 RPM -- Spindl... more
6
bore capacity in steel (diameter) 50 mm arm length 2000 mm workpiece height max. 1485 mm bed length 13 m bore spindles - Morse Taper 5 spindle turning speed - 12 steps 30 - 2000 UpM feeds 8 / 0,08 - 0,7 mm/U column diameter 410 mm bore capacity in cast iron 70 mm total power requirement 4 kW Icjrosqqs weight of the machine ca. 5 + ca, 5 t dimensions of the machine ca. 13 x 1,3 x 3 m Condition: ready for operation Automatic clamping Thread cutting device Clamping plate 2 x 1500 x 2000 m... more
1

right conveyor Horizon CTK-100

Germering b. München, GermanyGermany dealership location
6837 km
used
offer consist of: - expansion kit right conveyor CTK-100 L3g2x Horizon CTK-100 c-Tower Kit extra function: collating to both sides - compatibel with: Horizon VAC-100a Horizon VAC-60Ha more
4

Radial Drilling Machine REFORM RB 50 x 16

Mönchengladbach, GermanyGermany dealership location
6371 km
2002
used
bore capacity in steel (diameter):50 mm arm length:1600 mm workpiece height max.:1400 mm quill stroke:350 mm total power requirement:4,5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:2,5 x 1,2 x 2,8 m Gvouzc with boring cube 800 x 600 x 600 mm - central clamping more
6

rows and dowel hole drilling machine Scheer DB5

More Scheer Db 5
Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
good (used)
Type: DB5 used machine drilling unit swiveled Etjgqfvm3 13 drill spacing: 32mm wide accessory power consumption: 2,2 kW Year of construction:  location: Warehouse / 82281 Herrnzelll more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. I9dpxft OOYA RE2-1450D Radial Arm Drill -- Diameter of column 13-5/8" -- Maximum distance spindle to column 58-1/4" -- Minimum distance spindle to column 11-5/8" -- Drill capacity steel 2", cast iron 2-3/8" -- Boring capacity in steel 4" in cast iron 7-1/8" -- Traverse of spindle head on arm 46-5/8" -- Maximum distance between spindle and baseplate 70-1/4" -- Minimum distance between spindle and baseplate 23-5/8" -... more


anchor dri...
daily

New machines via email!

Stay updated!

to

to

Edit search
ANCHOR DRILL RIG
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close