Used Bauer Compressors for sale (281)

Condition: excellent (used), Bevel Gear Motor Dcodoxu U Najpfx Ah Uep Manufacturer: Bauer BK Stock number (28678) Type: BK40-14U/D11SA4-TF/SP Hollow shaft diameter: 40 mm Length: 700 mm Width: 250 mm Height: 320 mm Weight: 84 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 1.1 kW -Design: B3 -Diameter shaft: 40 mm -Protection rating: IP 54 -Height shaft axis: 155 mm -Long distance between holes: 115mm -Hole spacing across: 200 mm -Number: 1x motors available -Price per piece Djdpeci N Hhofx Ah Uocp -Dimensions: 580/270/H260 mm -Weight: 49kg

Condition: used, Year of construction: 2007, Offset 5 color KBA Rapida 74-5 Year: 2007 Number of impressions (mio): 69 Machine control - ColorTronic - ErgoTronic Console - Lithec Feeder - Suction feeder table Dcjdpfxoxrdxrj Ah Ujp - Double sheet control Printing units - Number of printing unit(s): 5 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Cooling system: Baldwin Balcontrol Delivery - Standard delivery - Non-Stop delivery - Powder spray: Weko AP232 Accessories - Compressed air compressor: Kaeser Max. output (s/h): 15000 Max. sheet size (mm): 605 x 740

Condition: used, Year of construction: 1986, cutting width 250 mm Dcodpfjupmwxsx Ah Ujp weight of the machine ca. 1,3 t dimensions of the machine ca. . m

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz Dcjdpfxsxrgups Ah Uop - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition

Condition: new, Bauer DK66 SZ3-2211/163 L gear motor M 16435551-01, serial number as per photo, hole spacing of the mounting holes: 91 x 91 mm, Ø drive shaft: 25 mm, unused with signs of storage, 100% functional, scope of delivery as per photos Dcedsi D E Dcjpfx Ah Uop

Condition: used, - Cutting range round up to 260 mm - Single-sided mitre cut up to 45° - Saw band dimensions 3660 x 27 x 0.9 - 4 cutting speeds Dcjdpfxjxgcuns Ah Usp - Hydraulic lifting and lowering of the saw frame

Condition: used, 🧰 Product Features • Manufacturer: Bauer • Condition: used • Color: orange • Capacity: 2000 l • Dead weight: 680 kg Dodpfxjuwc Rxo Ah Uocp • Length: 270 cm • Width: 115 cm • Height: 180 cm • Payload: 2,120 kg • Permissible total weight: 2,800 kg • Tanks have been cleaned 💰 Price: €900 net, excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible anytime by appointment Over 5,000 linear meters of pallet racks from various manufacturers constantly in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our Terms & Conditions, all prices exclude VAT, ex stock.)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, saw band length: 5,200 mm, total height: 2,340 mm, total width: 110 mm, type of input current: three-phase, cutting range round steel at 90°: 430 mm, feed rate Z-axis: 120 m/min, cutting width (max.): 430 mm, overall weight: 1,100 kg, input voltage: 400 V, height adjustment type: hydraulic, saw drive: 4,000 W, coolant tank capacity: 25 l, Very good condition, barely used. Fully functional. Year of manufacture 2011, but was a showroom machine at the dealer and purchased by us in 2018. Includes heavy-duty roller conveyor. Saw blade 3900x24x0.9 (different from the data sheet). (Bauer bandsaw, year 2018, S320DGHA also available – same saw blade as above) Dcsdpfexuu Ivox Ah Uep

Condition: excellent (used), Year of construction: 1988, needle diameter max. 85mm min0.85mm Grinding wheel width max. 150 mm Working range mm Speed ​​m/min45m/sec Total power requirement 22.5 kW Machine weight approx. 4,500 t Space requirement approx. m k O E N I G & B A U E R centerless cylindrical grinding machine for plunge grinding Type M 150 - Year of construction approx. 1988 700907 _____ max. workpiece length for plunge cutting approx. 200 mm Grinding wheel size: Diameter x width max. 400 x 150 mm Control wheel dimensions: diam. x width max. 300 x 200 mm Grinding wheel speeds max. rpm resp. 45 m/sec Steer wheel speeds infinitely variable 10 140 / 230 rpm Inclination of the control wheel +3 / -5 degrees Dedpfslfac Ssx Ah Uecp Battle of the two hydr. dressing slides approx. 200 mm Grinding wheel drive approx. 22 kW Total drive approx. 22.5 kW - 400 V 50 Hz Weight approx. 4,500 kg Accessories / special equipment The machine is a centerless grinding machine specially equipped for plunge grinding of cylindrical workpieces by hand See also our other advertisement multimat 250 transit machine

Condition: used, Year of construction: 1997, functionality: fully functional, power: 110 kW (149.56 HP), empty load weight: 30,000 kg, Channel baler BAUER Model: Taurus Bale dimensions: 680x1100x variable Dcodpfxew Ip E Do Ah Uep Technical data as per attached PDF. Including belt control The baler is available immediately

Condition: new, Bauer DK66 SZ3-2211/163 L gear motor M 1609019-02, serial number as per photo, hole spacing of the mounting holes: 91 x 91 mm, Ø drive shaft: 25 mm, unused with signs of storage, 100% functional, scope of delivery as per photos Djdpfx Ahei D E A Uo Uscp

Condition: used, - Cutting range 450 x 450 mm - Semi-automatic Dcodpfxjxdvmrj Ah Uep - Minimum quantity lubrication - Mitre adjustment left and right with digital display - Incl. roller conveyor 6 m on feed side (3 m powered) - Discharge side 5 m with material stop - Well-maintained condition - Saw drive 2.2 kW - Year of manufacture 1997 - Saw blade dimensions 4150 x 34 x 1.1

Condition: used, functionality: unexamined, machine/vehicle number: BG05-31, Used mobile/moveable double-walled stainless steel liquid mixer Kettle: double-walled stainless steel, hopper diameter 40 cm, approx. 50 liters capacity Mixer BAUER BG05-31, variable speed Dodpexn I Uvofx Ah Uocp Control 208-240 volt (industrial) with Siemens Micromaster frequency converter

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2035, input voltage: 380 V, power: 4 kW (5.44 HP), Transfer punching machine SCHOREDER & BAUER HB 20 Power 20T per workstation (2x20 T) Number of strokes from 20-100 rpm Year: 1989 Serial number: 2035 Kw 4 Weight approx. 3500 kg Complete documentation comes with the machine. The machine is in working condition. Dcjdew Tcgljpfx Ah Uop The costs of organizing a crane or forklift for loading the machine are charged separately.

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg Dsdpfou Nihusx Ah Uecp dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: new, Various inking and dampening rollers for KBA Rapida 106: - no. 00905480, Böttcher Metering roller / Feuchtdosierwalze, Ø 105mm, new (5 pieces) - no. 00905481, Böttcher Ink vibrator roller / Farbheberwalze, Ø 70mm, new (3 pieces) - no. 00905482, Böttcher Distributor roller / Farbübertragwalze, Ø 87mm, new (3 pieces) - no. 00905483, Böttcher Distributor roller / Farbübertragwalze, Ø 83mm, new (7 pieces) - no. 00905484, Böttcher Distributor roller / Farbübertragwalze, Ø 91mm, new (5 pieces) - no. 00905485, Böttcher Ink form roller / Farbauftragwalze, Ø 90mm, new (1 piece) Dcjdpfexcwa Djx Ah Ujp - no. 00905486, Böttcher Ink form roller / Farbauftragwalze, Ø 85mm, new (1 piece) - no. 00905487, Böttcher Ink form roller / Farbauftragwalze, Ø 80mm, new (1 piece) - no. 00905488, Böttcher Ink form roller / Farbauftragwalze, Ø 95mm, new (1 piece) - no. 00905495, Böttcher Waterform roller / Feuchtauftragwalze, Ø 108mm, new (3 pieces) - Ink duct foils, new, 85 pieces

Condition: new, Bauer E3-20/DO 56-170 B gear motor SN:221314-3 with E 003 B brake, terminal box cover missing see photo, unused, 100% functional, scope of delivery as per photos Dcodpfx Aoi D E Dgeh Ujp

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 48619996840278, load capacity: 5,000 kg, enginetype: Electric, manufacturer: Bauer Dcjdpfxew Rzwkj Ah Uep

Condition: used, New: Yes Dedpfxexlfb Us Ah Uecp Please contact us for more information.

Condition: used, Bucket with tipping function for forklift truck BAUER type BSM 90 Forklift bucket, tipping bucket, snow bucket, chip bucket, dumping bucket, tipping container Serial no. 4421 Year of manufacture 1983 Load capacity: 1500 kg Volume: 0.9 m³ Bucket width: 1570 mm Bucket depth: 1200 mm Bucket height: : 550 mm Entry pockets: 120 x 70 mm tine spacing inside/outside: 500/740 mm - Mechanical tipping device - Forklift entry pockets with openings for the forks in the loading area - Painted orange with slight rusting Tare weight: 275 kg Space requirement W x D x H: 1570 x 1500 x 800 mm Good condition Tare weight: 275 kg Dedpfx Ahju Swbus Ujcp

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Dcedpfx Aetyy Sfjh Usp Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cutting range round steel at 90°: 300 mm, - Saw band dimensions: 3660 x 27 x 0.9 mm - Max. cutting range round: 300 mm - Max. cutting range flat: 320 x 220 mm Dcsdpfjxgbq Usx Ah Usp - Roller feed with electric length stop up to approx. 800 mm - Incl. roller conveyor approx. 4 m

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm Dcjderl Irvspfx Ah Usp - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Dedpfx Aogin Ndeh Uscp Technical data: - Cutting range at 90° round 260 mm - flat 450 x 240 mm - Cutting range at 45° round 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - saw band dimension 3660 x 25 x 0,9 mm - cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering of the saw frame - cutting pressure infinitely variable 0 - 10 m/min - Total drive power 400 V / 0,8 kW - Coolant device - space requirement approx. W 2100 x H 1200 x D 1000 mm - weight approx. 500 kg