Used Auto Edger for sale (6,274)

Year of construction: 2012, condition: used, Two large and two small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 2x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible. Kdedpfxozun Ucj Ap Dou

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface Kodpfxjzcdwdj Ap Dedu • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Year of construction: 2026, condition: new, Dosage ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml 1 filling station Plastic bottles or glass bottles “Anti-drop” device if possible Filling nozzles and pumps made of stainless steel AISI 316 Bottle feed via slat conveyor belt Adjustable guides Volumetric filling of products / bottles Caps must be placed by hand Filling amount infinitely adjustable Kdsdewprv Nspfx Ap Dou Very easy machine operation

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: Kdsdpfx Ajw Hrrrjp Dju width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. In good condition. Kdjdpfx Apeza T Nkj Deu

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Kdedpfx Apjzt S U Rj Dou

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: Autosplice ACS 2000 Global Splice System, an industrial wire processing/splicing machine. Professional equipment for the series production of electrical wires and connections. The machine uses Autosplice Spliceband technology for creating various wire and component connections. Technical specifications: Manufacturer: Autosplice Europe GmbH Model: ACS 2000 Year of manufacture: 2012 Serial number: 110000450 Power supply: 230 V / 50 Hz Power consumption: 2 A Required compressed air: 6 bar / 87 PSI Weight: 51 kg Kdsdpjzx Edpjfx Ap Deu CE marking The machine is used and is in the condition shown in the pictures. Inspection and testing can be carried out while the machine is powered on. Location: 5720 Sarkad, Hungary. Sold by a company, with invoice. For further information, please contact us.

Condition: used, functionality: unexamined, The EL-BPC 200 industrial computer from Eckelmann Industrieautomation was removed from a palletizing robot system. Kdodpfx Aszfwmvsp Dsu

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Kdodpfx Aoyylqbop Dou LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Kedpfoyaw Ecsx Ap Djdu Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Kdedpfxjykuh No Ap Dsu Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. One side feeding suitable for line. Kdjdpfx Apew Am Ndj Dsu Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Condition: like new (used), Year of construction: 2017, 1.0 unit used IML system – system with removal unit, placement on conveyor belt for horizontal stacking Manufacturer: Beck Automation AG Type: B32 Year of manufacture: 2019 Ksdpfx Aewuln Nsp Dodu

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Kdedpfx Apoydnxns Dou Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; Ksdpeygxc Aefx Ap Dsdu - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD89NC2A1S, bending angle (max.): 190 °, overall weight: 2,000 kg, total length: 4,300 mm, total width: 1,300 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD89NC2A Machine Model: BD89NC2A Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations. Kodpfx Aovu R Amjp Dodu  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ89×3.0mm (thickness Max. 3.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ76×2.0mm (thickness Max. 2.0) Maximum core length (*) 3500mm Maximum bending radius (*) 450mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.30°/s Machine tool bending angle ±0.1° Hydraulic motor power 11.0kw

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Kjdpfx Apjxw Rdls Dedu Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction Kdedpfx Apex Izwmo Dou - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. Kodpfx Apec Utkaj Dodu 4x16 Ah connection. The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you.

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types Kdedpfx Ajfpif Dep Dju -Chuck size: Ø 210 mm -Weight: 124.2 kg

Condition: used, Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, storage container with automatic feeding, spiral conveyor -Manufacturer: Oku Automatik, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm Kodpfjrwqb Iox Ap Dedu -Work basin height: 245 mm -Screw conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

Condition: used, diameter 400 mm boring diameter / mm - / Kedjidrkfopfx Ap Djdu SMW-AUTOBLOK power chuck HFK 400 Diameter: 400mm Inner diameter: 100mm n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Kdodpfek Abn Ssx Ap Dou Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION Kdsdopiufwspfx Ap Deu • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor Kdodpfx Aeu Edp Sep Deu 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Paint finish light blue & light gray