Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 1600 mm Measurements height 2858 mm Machine weight 4400 kg Ijdpfx Asx D D Dfohyeal Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Application Types EDM

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Iajdpfx Ajx Tqfkohysl

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Iaedpfx Ahsxyxfpjysl Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Isdpfx Aheuzbayeyoal Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, Fanuc Alpha 1iC XL – extra high Z travel: 410 mm Excellent condition – fully operational Year of manufacture: 12/2006 Iaedpfx Aox T Akfshyjl Approx. 32,000 operating hours Control: Fanuc Alpha 180is-WB 5 axes: X: 550 mm / 900 mm/min rapid traverse Y: 370 mm / 900 mm/min rapid traverse U: 120 mm / 450 mm/min rapid traverse V: 120 mm / 450 mm/min rapid traverse Z: 410 mm / 900 mm/min rapid traverse Max. workpiece weight: 1000 kg Maximum cutting angle: 30° Automatic wire threading Weight approx. 3.1 t Without screen above the control unit Availability: very soon Loading possible

Condition: used, Year of construction: 2002, operating hours: 42,610 h, travel distance X-axis: 900 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 405 mm, table width: 850 mm, Table size X: 1200 mm Iedpfxjx Up Efo Ahyjal Table size Y: 850 mm Max. workpiece weight: 3000 kg Electrode changer: 16-position Quill interface: EROWA

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 1800 mm Measurements height 2200 mm Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 Iajdpfx Asx D N Hrjhyol This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Iaodpsxu Hvljfx Ahyol Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: used, Wire erosion FANUC ROBOCUT ALPHA-0iE Iaodpfx Aoxqrqaehyol

Condition: used, Year of construction: 2017, machine/vehicle number: 57CR2093, x-axis: 600 mm y-axis: 400 mm z-axis: 310 mm Max. workpiece weight: 1500 kg min. part length: 1050 mm maximum workpiece width: 800 mm max. workpiece height: 295 mm Weight of machine approx.: 3500 kg Isdpfox Ed H Nox Ahysal Standard configuration Max. workpiece dimensions 1050 x 800 x 295 mmWork table dimensions 840 x 640 mm (square table)Rapid traverse rate of the work table 1300 mm/minElectrode wire diameter 0.1 to 0.3 mmMax. wire feed speed 23 m/minElectrode wire tension 0.5 to 25 NTaper unit Opto - linearAxis travel +/- 75 x +/- 75 mmMax. taper angle 15° (with 260 mm workpiece thickness)External dimensions 2687 x 3030 x 2150 mm Extended machine accessories including cooler

Condition: good (used), Year of construction: 1994, Machine-Details : Stock-No. 1022-2397 Type of machine Cavity Sinking EDM - Machine Make ZIMMER & KREIM Type PEC 850 Year of manufacture 1994 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information : With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Iaodpfx Aex Nfzrohysl Weight: 2750 kg

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Control: CNC - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Iaodpewnhfkofx Ahysl

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Iodpfxow Ad Ide Ahyjal

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Iedsiv H Egjpfx Ahyjal

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Ingersoll (OPS Ingersoll) Sinker EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control device Manual eroding with Powertec Handheld High speed jump up to 18 m/min Generator output: 60 Amperes, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm 20-position pick-up disk electrode changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Isdpex I D R Nsfx Ahyoal Accessories: CO2 fire extinguishing system Integrated cartridge filter system Condition: Refurbished Special equipment: Linear measuring system on all axes (standard on Z-axis in Z series)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece weight (max.): 200 kg, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 2,455 mm, total length: 3,000 mm, total width: 3,760 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, overall weight: 3,700 kg, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, Equipment: cooling unit, documentation/manual, Wire EDM system GF AgieCharmilles CUT 2000 with loading robot Ijdpfx Ajx S Ehkshyjal Power on time: 91,716 h Operating hours: 17,889 h The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 with integrated automation/loading robot (WorkPartner) and is ideally suited for precise series and single-part production. The CUT 2000 is designed for highly accurate contour cutting with excellent surface quality and stable process control. It features the Vision-5 control unit (Windows XP), automatic wire threading system, integrated dielectric unit, and coaxial flushing, enabling reliable, low-manned operation. The loading robot (GF WorkPartner) transforms the machine into an automated production cell. Depending on the magazine version, workpieces weighing approximately 400 to 800 kg in total can be handled. Automatic loading and unloading allow for extended run times without operator intervention and significantly increase productivity.

Condition: excellent (used), Year of construction: 1996, Attention! Special price due to warehouse clearance. Control: CNC path control including monitor ZIMMER + KREIM TECHNICAL DATA Travel range X-axis 570 mm Y-axis 400 mm Z-axis 415 mm C-axis 360° Resolution X, Y, Z 0.001 mm C 0.001 degrees Clamping table surface area 840 x 600 mm Dielectric above table 360 mm 4 T-slots 10 mm Max. table load 1000 kg Distance table – quill 620 mm Automatic electrode changer Number of electrodes 50 Electrode weight – without rotation 100 kg Electrode weight – with rotation 15 kg Rapid traverse 800 mm/min EQUIPMENT/ACCESSORIES Iasdpohq A T Asfx Ahysl  6-fold pallet changer  50-position automatic electrode changer  C-axis  ADAPTI MAT 04 – monitoring and regulating device  PEG 90 – generator  EROWA IST chuck with 3 holders  Machine light  Electronic handwheel  Cooling unit for dielectric  Automatic CO2 extinguishing system  C-Box Zimmer + Kreim  14-fold flushing distributor  15-fold flushing quantity regulator  1 UPC pallet clamping system  2 pallets  Leveling elements  Documentation

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No - Control: CNC Iaedox Igc Uopfx Ahyel Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Iajdpfx Aowtd Edjhyel

Condition: used, Year of construction: 1994, Specifications: - Travels (X x Y x Z): 700 x 400 x 406 mm Iaedpfjx Rc Skjx Ahyjl - Controller: AGIEMATIC CF - Table load capacity: 2,000 kg - Table size (X x Y): 1100 x 1300 mm - Origin: Switzerland - Year: 1994 - Machine for parts

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system Ijdpfx Asxf Ezuohysal - Cartridge filter system - HSJ technology (High Speed Jump)

Year of construction: 2016, operating hours: 4,439 h, condition: ready for operation (used), General Data Machine weight 4200 kg Control Unit Brand FANUC Model 31i-WB Dimensions Machine Length 2900 mm Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 800 mm Ijdpsx Nr N Ajfx Ahysal Z-Axis Movement 310 mm Y-Axis Movement 600 mm This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, Toolmaking dissolved through company takeover Iedpfet Stwwjx Ahyjal

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system with tool changer are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine does not have its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Iodpfx Ahjtdkk Ajyeal Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2017, operating hours: 6,417 h, condition: ready for operation (used), General Data Machine weight 4400 kg Movement Ijdpfx Asx Nr N Nshyjal X-Axis Movement 600 mm Z-Axis Movement 400 mm Y-Axis Movement 400 mm Main Drive Number of axis 4 This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM