Condition: used, Year of construction: 2007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 19,000 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, Charmilles Roboform 350 Year of manufacture: 2007 Die-sinking EDM machine with C-frame design Fixed table with lowering tank Travel distances (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Lodpoyzzblsfx Aikehg Maximum workpiece weight: 500 kg Programmable tank height: 100–325 mm Generator hours: 6,337 h

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Lhjdjx Hgg Dspfx Aikeg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. Ljdpfx Aeyrqpfeikjhg The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Ljdpfx Aijyrqprjkohg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: Lhodpfx Asyrqn Ijikjg - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm Lhedpjypma Isfx Aikog • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, overall weight: 4,500 kg, number of axes: 3, This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Additional equipment • Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm Machine Benefits Technical Machine Benefits • Max workpiece dimensions (wxdxh): 750 x 550 x 250 mm • Axis travels u/v: ±70 mm • Positioning speeds: manual (x/y) 30°/100 mm, programmable (x/y) exc “a” 0. 9 m/min, cha/exc “d” 3 m/min, u/v/z 0. 6 m/min • Compressed air: Ø 7 mm, 6-8 bar, 5 m³/h, filtered, dehumidified, unlubricated Lsdpfx Aiox D Sb Eskshg • Cooling water: ≤ tune level -7°c, 20 l/min, 1. 5-3 bar Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. • Maximum workpiece weight: 800 kg • Tank length: 1195 mm Lhodpfx Aisx Uzb Ejkog • Tank width: 800 mm • Tank height: 400 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,270 kg, controller manufacturer: AGIE, number of slots in tool magazine: 4, number of axes: 4, This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine. • Power supply: 3-phase, 380 V / 400 V • Power consumption: 6 kVA • Mains frequency: 50 / 60 Hz Lodpfx Asyf In Soikjhg • Axes and travels: • C-axis travel: 360° • C-axis rotational speed: 100 rpm • Work area: • Overall work area: 800 × 550 × 370 mm • Working area size: 500 × 400 mm • Technical condition: • Fully operational; ran until last day of operation

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. • U/V axis travel: 140 × 140 mm • Maximum workpiece size (X, Y, Z): 1050 × 800 × 400 mm • Maximum workpiece weight: 3,000 kg • Taper cut angle (400 mm Z): 9° / 400 mm • Maximum taper cut angle: 30° / 100 mm • Wire spool types: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: closed diamond, high-precision, zero backlash • Positioning resolution (X, Y, U, V): 0.001 mm Ljdpsx D D Tasfx Aikshg • Minimum programmable increment: 0.001 mm • Wire cutter: yes • Automatic wire threading: yes Additional equipment • Water chiller / temperature control: yes • Water/sludge cleaning system: yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,439 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, controller manufacturer: FANUC, controller model: 31i-WB, product length (max.): 2,900 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. Ljdsx Nr N Aspfx Aikshg • Work area / travels: • U-axis: 200 mm • V-axis: 200 mm • Rapid traverse rates: • X-axis: 2000 mm/min • Y-axis: 2000 mm/min • Z-axis: 900 mm/min • U-axis: 450 mm/min • V-axis: 450 mm/min • Workpiece capacity: • Maximum workpiece dimensions: 1250 × 975 × 300 mm • Maximum workpiece weight: 3000 kg • Wire EDM parameters: • Maximum wire weight: 16 kg • Maximum taper angle: ±30° / 150 mm • Minimum positioning increment: 0.0001 mm • Machine data: • Permissible workpiece mass: 3000 kg • Electrical data: • Power supply: 3-phase, 50/60 Hz • Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, overall weight: 6,440 kg, controller manufacturer: SODICK, controller model: LP1, number of axes: 3, This 3s Sodick AG55L die-sinking edm machine was manufactured in 2008. With a magazine capacity of 32 positions and a maximum workpiece weight of 1000 kg, it offers robust capabilities for precision machining. The X travel reaches 550 mm and Y travel extends to 400 mm, making it suitable for various applications. Consider the opportunity to buy this Sodick AG55L die-sinking edm machine. Contact us for further details. Lhedpfx Aioyk Ddyjkjg • Magazine capacity: 32 positions • Table dimensions: 750 × 550 mm • Internal tank dimensions: 1100 × 950 × 500 mm • Maximum workpiece weight: 1000 kg • Maximum electrode weight: 50 kg • There are 2 equal machines available

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,350 kg, This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details. • Maximum electrode weight: 25 kg Lodpfeylzi Nex Aikshg • Minimum power consumption: 5 kVA • Power: 7.5 kVA • Voltage: 400 V • Frequency: 50 Hz • Current: 10.6 A Additional equipment • Erowa zero-point clamping system on table (included) • Electrode holder: not included

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 350 mm, total height: 200 mm, total width: 210 mm, overall weight: 150 kg, product length (max.): 460 mm, number of axes: 3, This 3-axis HUBER OCT-3020 NA die-sinking EDM machine was manufactured in 2006. It features a travel of 300 mm in the X-axis, 200 mm in the Y-axis, and 350 mm in the Z-axis, accommodating workpieces up to 460 x 210 x 200 mm. If you are looking to get high-quality die-sinking capabilities, consider the HUBER OCT-3020 NA machine we have for sale. Contact us for further details. • Electrode diameter range: 0.3–3.0 mm • Power supply: 400 VAC, 3-phase, 50/60 Hz Ledpfxsyrg Tgo Aikjhg • Connected load: 3.8 kVA Additional equipment • Electrode pre-positioner: Erowa

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper Lodpsx D Ryyjfx Aikohg • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: ready for operation (used), Year of construction: 2015, operating hours: 64,348 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi MV 2400S wire EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm. The machine can accommodate workpieces up to 1,050 mm in length and 820 mm in width, with a maximum weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV 2400S machine we have for sale. Contact us for further details. Lsdjylm Scopfx Aikjhg • Maximum workpiece length: 1,050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1,500 kg • Tank length: 1,050 mm • Tank width: 820 mm • Tank height: 305 mm • Automatic wire threading: Yes Additional equipment • Wire feeder with enlarged 25 kg spool

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,357 h, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Additional equipment • Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container • Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control • Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 1852 x 2825 x 2570 mm / machine weight: 5350 kg • Max. Workpiece weight: 1500 kg / ceramic table dimensions (w x d): 750 x 550 mm Lsdpsx D Rytofx Aikjhg • Floor-table distance: 850 mm / max. Electrode weight: 50 kg • Dielectric fluid level (min-max): 150 - 400 mm / dielectric capacity: 465 l

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment • Includes all accessories in the photos • Includes digital documentation Machine Benefits Technical Machine Benefits Lhodpeyali Asfx Aiksg • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg • Automatic wire cutting and feeding Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,220 h, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,545 mm, overall weight: 5,500 kg, controller manufacturer: FANUC, controller model: PC, number of axes: 5, This 5-axis AgieCharmilles FI 640 CC was manufactured in 2008, featuring a robust design with machine dimensions of 2550 × 2700 × 2545 mm and a weight of 5500 kg. It supports a maximum workpiece weight of 3000 kg and dimensions up to 1300 × 1000 × 510 mm. Equipped with collision protection and automatic wire threading, it's ideal for precise wire EDM tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Wire tilt angle: ±30° • Feed rate: 0 – 1500 mm/min • Maximum workpiece dimensions: 1300 × 1000 × 510 mm • Maximum cutting height (in immersion): 510 mm • Standard supply voltage: 380 or 400 v • Frequency: 50 or 60 hz • Collision protection: x, y, z, u, v Lhedpfx Ajyaqcbsikjg Extra Information Tools Standard wire guide diameter: 0.25 mm Optional wire guide diameters: 0.1, 0.15, 0.2, 0.3, 0.33 mm Automatic wire threading Automatic re-threading Max. threading height: 510 mm Min. hole diameter for threading: 0.6 mm Dimensions Machine Depth 2550 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,544 h, number of axes: 3, This 3-axis Exeron EDM 313 was manufactured in 2012. It features a control type 313 and operates with advanced software including exoUI V2.0.0.40. The machine has a total of 17,633 operating hours, with 7,830 hours on the control. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 313 machine we have for sale. Contact us for further details. • Control type: 313 • Hardware: APC ApC910 • Software: exoUI V2.0.0.40 • CNC: V2.0.0.40 • PLC: V13.0.0.0 • GIF: V72.0.0.0 • HSL: V10.0.0.0 • RTOS: V4.0.6.9 • ACP: V0.0.0.0 • Machine operating hours: 17,633 h Lhodpfx Aisylxwkekjg • Control operating hours: 7,830 h • Generator operating hours: 7,544 h

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, wire diameter (max.): 0.3 mm, overall weight: 2,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA AE 400 wire EDM machine was manufactured in 2005. It features a maximum workpiece dimension of 800 x 500 x 250 mm and can handle a maximum workpiece weight of 500 kg. The machine also includes a dielectric tank capacity of 600 liters. If you are looking to get high-quality wire EDM capabilities, consider the ONA AE 400 machine we have for sale. Contact us for further details. • U/V axis travel: 80 x 80 mm • Max. workpiece dimensions: 800 x 500 x 250 mm • Max. workpiece weight: 500 kg Lhedpoymal Eofx Aikeg • Max. taper angle: ±20° (at 100 mm height) • Dielectric tank capacity: 600 liters

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,580 mm, total width: 3,350 mm, overall weight: 3,200 kg, product length (max.): 1,630 mm, number of axes: 3, This 3-axis AGIE AGIETRON INTEGRAL 2 was manufactured in 2006. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 350 mm in the Z-axis. The machine can accommodate workpieces up to 840 x 670 x 250 mm and has a maximum electrode weight of 100 kg. If you are looking to get high-quality die-sinking capabilities, consider the AGIE AGIETRON INTEGRAL 2 machine we have for sale. Contact us for further details. • Units available: 2 • Workpiece size: 840 x 670 x 250 mm • Weight: 400 kg • Number of electrodes: 28 • Max. electrode weight: 100 kg Lodoyrqk Nepfx Aikehg • Circuit diagram: 625942.8 • Electrical: 3 × 400 V, 50 Hz, 6.1 kVA, 8.8 A

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Lsdpex D Iv Sjfx Aikehg Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse • Electronic manual control panel • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Ledpfx Aiev S Ua Djkohg Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! We are also happy to offer commissioning and training on the machine.

Condition: used, Year of construction: 1999, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm Lhedpfxoyq E Sxj Aiksg table size X: 550 mm table size Y: 470 mm max. workpiece size X: 700 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 20 - time generator: 50 Ampere drop tank Control CNC control: Mitsubishi 32-bit EDM control