Condition: like new (used), Year of construction: 2016, operating hours: 5,563 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, total height: 350 mm, wire diameter: 25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 1,200 mm, workpiece length (max.): 800 mm, type of input current: three-phase, overall weight: 5,500 kg, tank capacity: 1,000 l, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, Machine is in 100% condition, like new. Fine surface and accuracy production. Fast cutting. All the manuals and documents are included. Inspection of machines can be done daily Csb Eztswcfahe E Regt

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2004 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out a test cut for you on site. Optional: - Commissioning Cgjb Ezjrzt Rdot E Rst - training - Transportation - Cooling unit - Clamping device

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control Cgob Eovt Ec Sjzt E Rjt - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 400 mm Travel distanceY :300 mm Travel distance z: 250 mm Cgjb Eov I Tv Nezt E Ret max. workpiece size X: 600 mm max. workpiece size Y: 470 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm submerged cooling unit CNC control LN2W

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,470 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, overall weight: 12,500 kg, year of last overhaul: 2025, table load: 7,500 kg, Equipment: documentation/manual, Status: overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 Ampere - multipulse Travel (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 13-fold pick-up linear changer Work bowl (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Csb Ezov Ivuhst E Regt Load capacity: 7,500 kg Accessories - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 2400 mm Measurements depth 1300 mm Measurements height 2210 mm Machine weight 2700 kg Main Drive Number of axis 5 Movement X-Axis Movement 300 mm Y-Axis Movement 200 mm Z-Axis Movement 200 mm V-Axis Movement 80 mm U-Axis Movement 80 mm Workpiece Csb Eztou Svxxj E Rjgt Workpiece weight 300 kg Additional Equipment Electric Tank External Dimensions (W x D x H): 1300 mm x 900 mm x 2186 mm Electric Tank Weight (Empty): 550 kg Electric Tank Capacity: 380 liters Electric Tank Deionizer: Ion-exchange resin (10-liter type) Electric Tank Filtering System: 2 replaceable paper filters (internal-pressure type) This 5-axis Sodick AQ300L wire EDM machine was manufactured in 2007. It features a travel range of 300 mm x 200 mm on the X and Y axes, and a Z-axis travel of 200 mm. The machine can handle workpieces up to 300 kg and offers a taper angle of ±20°. Ideal for precision machining with wire diameters ranging from 0.15 to 0.3 mm. If you are looking to get high-quality EDM capabilities, consider the Sodick AQ300L machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, table length: 700 mm, table height: 500 mm, Makino EDAF 3 Die-sinking EDM Machine Year of Manufacture: 2015 Travel: X-axis: 450 mm Y-axis: 350 mm Z-axis: 350 mm Table: 700 x 500 mm Table load: 800 kg Control: Makino Hyper i ATC: 16 Machine dimensions: Cgeb Eztswaixcs E Ret L x W x H: 2,300 mm x 3,060 mm x 2,600 mm Weight: approx. 5 t

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2005 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection Cgjb Eztorzt Rwo E Rst The machine is cleaned, overhauled and tested by us after receipt of the order. We are also happy to offer you commissioning and training.

Condition: excellent (used), Year of construction: 2020, operating hours: 3,339 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,645 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,450 mm, workpiece length (max.): 950 mm, overall weight: 6,300 kg, For sale is a CUT P 800 wire erosion machine incl. options: Wire guides 0.25 mm AC-Setup 3D Taper-Expert © 0.25 mm Horizontal manual annealing Additional M-functions Cgjb Eztju Ic Nie E Rst Signal light - operating status display Automatic central lubrication

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,100 mm, workpiece length (max.): 850 mm, net weight: 5,200 kg, Selling our Sodick AQ750L wire EDM machine Machine is in good condition, being sold due to new purchase. YEAR OF MANUFACTURE 2003 Inspection under power possible, test cuts also possible. Accuracy of the machine is good. Cebevbyive Ezt E Rogt Due to the linear drives, the machine is very accurate even after years. The many ceramic parts also contribute to the accuracy in terms of thermal expansion. Travels U770mm V 520mm

Condition: refurbished (used), Year of construction: 2013, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Cjb Ezsv Icfyot E Regt Multiprog Powertec technology programming on CD for external programming station

Year of construction: 2013, operating hours: 21,628 h, Condition: ready for operation (used), General Data Measurements width 2830 mm Measurements depth 6070 mm Measurements height 4150 mm Machine weight 450 kg Control Unit Movement X-Axis Movement 2000 mm Csb Eov Nb Hxjzt E Rogt Y-Axis Movement 1180 mm Z-Axis Movement 800 mm Table Outer length 2500 mm Outer width 1350 mm Distance between 220-1020 mm This EXERON 316 XXL Erosion machine was manufactured in the year 2013. Application Types EDM

Condition: used, Year of construction: 1993, total height: 2,350 mm, total width: 1,300 mm, total length: 1,900 mm, Empty weight: 1.000 kg Travel: 350x250x300mm Table: 500x400mm Max. Workpiece weight: 200kg Container: 700x500x300mm - Year: 1993 Cgsb Ezt Eev Sth Te Rst - Documentation available: Yes - Control: CNC - Transport dimensions: 1900mm x 1300mm x 2350mm (l x w x h) - Transport weight: 1000kg - Transport packages: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Charmilles ROBOFORM 550 Year of construction 2005 Construction: - short C-frame with fixed table - Automatically lowerable container Travel: X = 600 mm, Y = 400 mm, Z = 450 mm; Max. Workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. Workpiece weight: 1600 kg Max. Electrode weight: 100 kg Min. /max. distance between table and quill: 150-600 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); Without electrode magazine Incl. C-axis for rotation, indexing and erosion Max. Electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handbox Integrated connections: Ethernet RJ45, floppy disk drive, CD-Rom drive Machine weight (net): 4400 kg Cgeb Eoryvd Dozt E Rot Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is currently still being used by our customer and will be dismantled by our specialist staff. After ordering, the Roboform will be cleaned, serviced and tested by us. Optional: - Transportation - Cooler - Dielectric - Commissioning

Condition: refurbished (used), Year of construction: 2006, Status: overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 Ampere - multipulse Travel (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 13-fold pick-up linear changer Work bowl (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories Cgebjv Hxzho Ezt E Rot - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Year of construction: 2002, operating hours: 44,266 h, Condition: ready for operation (used), Main Drive Cgobjv I Hfdj Ezt E Rjt Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 700 mm Workpiece Z 400 mm Table Table load 1000 kg This 3-axis CHARMILLES Robofil 440 was manufactured in 2002. Ideal for precision wire EDM tasks, this machine offers robust performance and reliability. If you are looking to get high-quality EDM capabilities, consider the CHARMILLES Robofil 440 machine we have for sale. Contact us for more information. Application Types EDM

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 232 mm, total length: 279 mm, total width: 202 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, net weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of construction 2016 Wire EDM machine with automatic wire threader Traverse paths (X/Y/Z): 600 x 400 x 350 mm Travel (U/V): +/- 50 mm Taper / height: 30° at 77 mm height Max. Workpiece dimensions: 1030 x 800 x 350 mm Cgjb Esv N H U Uezt E Rjt Max. Workpiece weight: 1000 kg Best surface quality for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm User-friendly AC CUT HMI 2 user interface Operation via 19" TFT touchscreen Dimensions of the system: 2020 x 2790 x 2320 Total weight without dielectric: 4440 kg The wire EDM machine is cleaned, serviced and thoroughly tested by us after receipt of the order. We are happy to carry out a test cut or an inspection under power in advance. Commissioning and training can also be carried out by us. We also offer optional services: - Transportation and installation - Cooling unit - Clamping device - Wire / filter / resin

Year of construction: 2000, Condition: ready for operation (used), General Data Cgob Ezevz Itiet E Rst Machine weight 2358 kg Control Unit Brand FANUC Model Series 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 520 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 370 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT α-1iA was manufactured in 2000. Ideal for precision cutting, this machine offers robust performance and reliability. Consider the opportunity to buy this FANUC ROBOCUT α-1iA. Contact us for more information. Application Types EDM

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture 2015 Ceb Ezjv I T Tbot E Rogt Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V-O Generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm (including KIT 70) Water bath machine with automatic wire threading With automatically lowering container (accessible from two sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D Including glass scales for the X and Y axes VISION 5 control system 15" LCD color screen, keyboard, and mouse Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Includes a 6-month warranty We completely overhaul and test the machine. A customized test cut is also available. We also offer on-site commissioning and training for this machine.

Year of construction: 2004, Condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 700 Y-Axis Movement 500 Z-Axis Movement 400 U/V Movement 140 x 140 Cob Ejv Db E Dszt E Regt This 5-axis ONA KE 450 wire edm machine was manufactured in 2004. It offers precision and versatility for complex machining tasks. If you are looking to get high-quality EDM capabilities, consider the ONA KE 450 machine we have for sale. Contact us for more information. Application Types EDM

Condition: refurbished (used), Year of construction: 2016, GF AgieCharmilles Progress VP3 Year of manufacture 2016 Travels: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient Setup AGIE IPG-VP Generator AGIEVISION 5 Control System Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled upon receipt of the order. Ceb Ezsv I T Huot E Rsgt You receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training.

Year of construction: 2016, Condition: ready for operation (used), General Data Machine weight 4200 Main Drive Number of axis 4 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1000 mm Workpiece Y 700 mm Workpiece Z 400 mm Table Outer length 800 mm Cgsbju Txh Aj Ezt E Rot Outer width 600 mm This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2016. It features X, Y, and Z-axis movements of 600 mm, 400 mm, and 400 mm respectively, and a C axis for enhanced versatility. The table measures 800 x 600 mm, supporting workpieces up to 1000 x 700 x 400 mm. Weighing 4200 kg, consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for further details regarding this machine. Application Types EDM

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, GF AgieCharmilles CUT 2000 Year of manufacture 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm Water bath machine with automatic wire threading With automatically lowering container (accessible from two sides) Including AGIEJOGGER handbox for Convenient setup Including AGIESETUP 3D Cgsb Eztjv I T Dgj E Ret Including glass scales for the X and Y axes VISION 5 control system 15" LCD color screen, keyboard, and mouse Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Including a 6-month warranty We completely overhaul and test the machine. A customized test cut is also available. We also offer on-site commissioning and training for this machine.

Year of construction: 2002, operating hours: 21,000 h, Condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 450 mm C-Axis Movement 360000° Workpiece Workpiece weight 1600 kg Tools Number of station 24 Additional Equipment ISOPULSE 64A generator EROWA head Magnetic chuck This 4-axis CHARMILLES ROBOFORM 55P was manufactured in 2002, designed for precision die-sinking EDM applications. Ideal for detailed and complex molds, it offers robust performance and reliability. Consider the opportunity to buy this CHARMILLES ROBOFORM 55P die-sinking edm machine. Contact us for more information. Application Types EDM Ceb Ezt Eovxbv Se Rogt

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 Year of manufacture 2015 C-construction die-sinking EDM machine Fixed table with lowerable container Travel paths (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (as desired) Max. electrode weight: 50 kg Max. inertia: 2000 kgcm² 4-way electrode changer User interface AC FORM HMI Cgjbsv Ilx Ne Ezt E Rot Operation via 15" LCD color screen with touchscreen Keyboard and handheld control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg We clean the machine and service it after receiving the order. This is followed by an erosion test. We will be happy to commission the machine for you and provide operating instructions. Optional: - Transport - Cooling unit - Dielectric - Clamping device