height of printing: -
height of printing: -
connection electric: 100-240 V
pneumatically operated: min./max.: 4,8/6,9 bar
The printer is a lower case inkjet printer for contactless mark products.
Application: for commercial marking and labeling purposes.
The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer)
Equipped with two control units.
- dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits;
The Peddinghaus marking unit Signomat 05 has an anvil which works as a thrust bearing for the print wheel during the marking process. Number of types: 36, 26 pieces of letters and 10 pieces of numbers font height: 12mm marking depth for material of 450 N/mm²: 0,6mm marking pressure (100bar, adjustable): 50 kN height-adjustement, hydraulic, continuous: 610mm adjusting drive print wheel DS-Servomotor: 1,4 kW material thicknesse: max. 120mm machine measures: H 1750mm x B 680mm x T 13... more
work table: 200 x 360 mm
template table 300 x 520 mm
transmission ratio max. 1 : 1,5
transmission ratio min. 1 : 10
spindle turning speed range 475 - 20.000 U/min
milling bearing max. 8 mm collets
total power requirement 0,55 kW
weight of the machine ca. 0,62 t
Mechanic: very good
Optical condition: very good
The machine can be viewed under current.
10739, colour: green,
380 V with CEE plug and cable
machine lamp / cold light
Shape plate holder
Automatic engraving - and reducing machine
Brand: Friedrich Karl Augenstein
Year of construction: 1972
Masch. No. 24.3.55 F
The machine is located in a Museum, original state.
With the pictured accessories and hundreds of templates related to the machines.
Request for bidders with relevant expertise.
Technical data on the machine:
1. reduction ratio:
This machine cuts can be customized, from 0 to 140 mm diameter in 0.5 mm increments to model pieces up to 300 m... more
:380 x 380 mm
turning speed range:2500-20000 U/min
power capacity:0,18/0,25 kW
Overall size:1100x1400x1000 mm
table::400 x 200 mm
More details in Appendix. 100 % before loading warranty: none more
Gravograph IS6000 incl. frame & software
Working area 610 x 410 mm
Z strok 80 mm
Spindle motor 70W
Spindle speed 13,000-20,000 rpm
Dimension 1093 x 1015 x 735 mm
Weight 168 kg
Delivery within Germany on request
x-travel 0 mm
y-travel 0 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Marking machine for cylindrical parts, rotary table, 4 axes, PV 70 Head
Ammoniacal line of incision and tin stripping with relative electrical panel and rectifier of the electrolytic cell; works together with the regeneration core and the electrolytic cell - year 2005 - Schmid brand. Regeneration core and electrolytic cell, year 2005, Schmid brand
On line auction on Industrial Discount:17/04/2018 more
GRAVIERMASCHINE GRAVOGRAPH ITL -
Baujahr: ca. 2000
L x B x H: ca. 600 x 600 x 800 mm
Gewicht: ca. 50 kg
Sehr Guter Allgemeinzustand
TECHNISCHE DATEN - GRAVOGRAPH ITL
ca. 66 x 365 mm
ca. 140 x 275 mm
ca. 115 x 250 mm
Verhältnisse: 1 : 2 - 1 : 7
Fräser Ø: ca. Ø 3,17 mm
Schablonentisch: ca. 150 x 420 mm
Schraubstock: ca. 295 mm
Max. Einbauhöhe: ca. ... more
One as well as new engraving machine for sale.
Engraving area on the table 75mmx25mm
Suitable also for hard engraving.
NP was €6700
The machine was hardly ever used and works perfectly.
* Touch screen * keyboard
* Also in battery operation possible with handle (2Akkus new / newly attacked)
Here we offer controller LPC03 a Lascon laser system with Lascon.
Laserline diode laser
The diode laser ›LDM 500-60 ‹ has a wavelength
of 450 nanometres and a power output of 500 Watts
Laser type: LDM 500-60
Wavelength of 450 nm
Laser power: 500 W
Type: LDM 500-60
Lascon controller LPC03
The LPC03 has the capacity of a full PC in a small space.
Instead of a hard drive, a removable flash disk has been installed.
The LPC03 is therefore ideally suited by eliminating the hard dis... more
Processing range: 254 mm x 203 mm
The vision of Ve810XD is the smallest unit of our product range. It is suitable for the marking of plastics, aluminium, brass, wood, u.v.m. The 11/64? engraving spindle can absorb many different tools – such as engraver's milling cutter (prick), cutting diamond, burnisher, cylindrical milling cutter... The engraving table can be removed with a few steps and be replaced by a Vice. So workpieces with a height of up to 80mm can be clamped. The automatic material h... more
Laser marking system from a clean company
Laser rail 65 Watt, lamp
Cooling - Cooling
Glass scale system for X, Y and Z
Laser safety goggles
65 watt Nd. YAG, lamp. The laser beam can be focused with high-quality Zeiss optics. In addition, the beam can be tapered via a ceramic mode diaphragm, making extremely fine laser marking possible. The enti... more
Fiber lasers are among the Group of solid state lasers. You generate the laser beam by means of a so-called seed laser and reinforce it in specially built glass fibers, which energy is fed via pump diodes. They achieve a very small focus diameter, leaving their intensity up to 100-fold higher than same medium power specified off CO2 lasers with a wavelength of 1,064 micrometers.
The fiber laser is ideal for metal marking by means of tempering, metal engravings and contrasting plastic tags. Fi... more
Maximum values for output: 10W/lmJImpulsdauer: 5-30 msWellenlaenge: 1064 nmNorm: IEC 825-1Pilotlaeser 650 nm; 1.0 mW, pulse peak power 35-100kw, label 110x110mm (opt. 180x180mm), 3.Achse for cylindrical or oval parts marking, warm-up 45 s, electric Anschluss110-240V / 16A / 50-60 Hz, weight 19.3 kg total system
Trumpf laser marking SystemTruMark 6000
Type TruMark 6020
When a lens the lens should be changed, because there is a slight damage to the metal ring. Important not for the function!
These two markers from a disassembly, we are not a facility for laser systems.
For sale is the extremely well-preserved engraving machine with accessories clamping jaws, software, connection cables, top condition both optically and technically super suitable for small businesses such as key service Cup Geschaeaefte gifts shops and more to the immediately engrave and personalize articles.
Also for engravings take regularly need or signs.
Machine is running over serial interface
- Working surface: 2000 x 3000 mm
- Laser power: 150 W
- Laser type: CO2, glass tube 10.6µm
- Cooling: water
- Cutting speed: 0-30 000 mm / min
- Maximum engraving speed: 60,000 mm / s
- Cutting control: 0-100% (regulated by the software)
- Minimum cutting area: 1x1 mm
- Resolution: 4,000 DPI
- Precision cut: ? + 0.02 mm
- Software: DSP Control System
- Supported file formats: DST PLT BMP DXF DWG AI LAS, etc.
- Compatible software: CORELDRAW, PHOTOSHOP, AUTOCAD, TAJIMA, etc.
- Color sep... more
CNC engraving machine
Type: Markomat SKA 2818
high frequency engraving spindle HG 400
year of mfg: 1985
rangesin X / Y / Z: 280 x / 180 / 350 mm
spindle revs stepless from 10.000 to 60.000 revs a minute
magnetic clamping plate 400 x 150 mm
total electrical power: 0,8 kVA at 230 Volt / 50 Hz
air pressure required: 4 - 6 bar
machine diemnsions L x W x H: 1,60 x 0,90 x 1,80 Meter
Pulsed laser with 20 Watts and an edit box 100 x 100 mm
The laser was used only in the application.
Immediately switch to PC, software, ready.
Request customer training with us in the House of local
-Sightseeing in Kaiserslautern possible by appointment
Technical data and information:
Ideal CO2 laser for small to medium production volumes
Compact laser system with a work area which is slightly larger than DinA3. The entire system is designed as a tabletop unit. Despite small dimensions, this CO2 laser offers extensive functionality to it professionally cut and engrave. For longer parts it is possible to push through the workpieces horizon... more
Machines for industrial and commercial use
Engraving, cutting and processing machine are machine IS8000 for large formats.
You enable the engraving, cutting and editing formats up to 610 x 1220 mm.
These solutions are suitable in particular for the following tasks:
Mass production of small signs
Production of large-sized boards
Trimming the letters for large signs
Machining and engraving front panels made of acyl and aluminium
Marking of bulky machine parts, moulds made of bra... more
gebr. Engraving machine Make KIRBA (cherry) Model LH 172 Machine no .: 9009 Year 1972 router table 200 x 400 mm stencil table 200 x 400 mm longitudinal adjustment 400 mm QÃ¼rverstellung 150 mm height adjustment 420 mm Pantographenverstellung 1 + 2 1.75 15 UebertragungsverhÃ¤ltnis: 1: 1 400 x 100 mm 1: 15 33 x 10 mm Speeds 1850 20,000 rpm motor 250 W / 2780 rpm External dimensions: Length 1000 mm Width 650 mm Height 1300 mm Weight 250 kg Including: Letters and numbers stencil holder pliers Ersa... more
Type K 20
Year of built: unknown
L x W x h: approx. 1200 x 700 x 1200 mm
Weight: 150 kg
Circle - dividing machine
suitable inter alia for the:
-Marking of scale rings
-Marking of plates
Largest diameter to sharing:
at scale on a flat surface: approx. Ø 500 mm
Division on cylindrical surface: approx. Ø 250 mm
Maximum workpiece weight: approx. 20 kg
Maximum workpiece height: approx. 200 mm
Year of manufacture 2016
Machine type Laser
Assembly dimensions LxWxH (mm) 1.300 x 1.800 x 1.775
Laser Wavelength 1.070 nm
Laser Output Power 500 W
Power 6 kW
Cutting field 600 x 600 mm
Stroke in X/Y/Z 600/600/50 mm
Cutting depth max. 3 mm
Rapid traverse 30 m/min
Hermetically sealed housing
Equipment / Accessories
Laser protection cabin (laser protection class 1)
Deckel engraving machine offered.
Machine number: 55654
Table (upper): 320x450 mm
Table (lower): 350x200 mm
Dimensions: 120x100x145 cm (LxWxH)
For more information call us or send an e-mail.
Sell here a 20 Watt fiber laser with 1064nm wavelength from Rofin.
It's a high-performance laser which is suitable for the installation in production systems.
Typical applications include marking, engraving, Ablation, deburring, cracks, edge isolation, structure, cutting.
The system ran very little because most items were engraved.
The price is without table and Z-axis.
i.e. it is sold only the laser together with supply unit, Siemens industrial PC, VLM software dongle fo... more
Suited perfectly to the engraving by professional signs
Due to its 305 x 210 mm large engraving area the M40 is professional signs perfect for engraving. The mirror feature of our software allows the back of signs for an optimal, transparent rendering the engraving. The open engraving area guarantees good accessibility of the work area from all sides.
The M40 is suitable for engraving a variety of materials such as metal, plastic, wood or glass, etc.
The objects easily with t... more
Here we offer them a trump VectorMark laser marker with Fuchs extraction and filtration equipment. Trumpf VectorMark green 532nm trump VMc2 laser marker with frequency doubled diode-pumped Nd: YAG laser with hurrySCAN 10 - galvo head of Scanlab Fuchs extraction and filtration equipment TKFD The integrated pre-separator causes the high filter capacity Different filter stages are possible and perfectly individually adapted Ideal where space is restricted under a integrated table placeable or in ma... more
We sell an engraving milling machine WMW FG 200 x 400.
The machine is built in 1973, fully functional and with a lot of accessories.
Gavierstichel, letters, digits, special characters, spare belt...
To see all the pictures.
A complete manual is available.
The machine can be gladly visited and tested.
Speed range up to 20,000 1/min.
It will be issued an invoice including VAT.
The machine is sold without warranty.
Pick up desirable, a transport against the costs can ... more
Convolute, machine package engraving machines
1 x lid G1L
1 x Kuhlmann GM 1/2
1 x lid G1L
1 x Kuhlmann GM1
1 x lid GK2
1 x cover G2
1 x tin snips 650 mm cutting length
1 x tin snips Weber 500 mm cutting length
Miscellaneous accessories approx. 18,000 letters and numbers templates (metal and plastic)
pattern table size: 320 x 440 mm
working table size: 200 x 300 mm
working area longitudinal: 250 mm
working area cross: 220 mm
spindle turning speed range: 1460 - 8550 rpm
milling proportion: bei 1 : 1 ca. 105 x 165 mm
spindle drive: 0,86 kW
space needed: 1000 x 900 x 1320 mm
weight: 360 kg
Manufacturer coherent Designation AVIA 355-14-70 year 2011 State as new hours of operation small 500 wavelength 355nm suggestion diodengepumpt type of laser ND: YAG laser laser type 2 GHG, Q-switch mode pulsed laser power 14 W at 70 kHz beam quality (M ^ 2) 1, 05 mm mrad operating voltage 240 V AC mains frequency [...] Hz applications removal / restructure, labeling / marking, drilling materials for machining mild steel, stainless steel / stainless, aluminum, titanium, copper / brass, polymers, ... more
The IS400 volume, a considerable version IS400, designed for the engraving of large objects.
In the scope of delivery:
Machine complete with
Cable GravoStyle 98, on request Gravostyle 8
and much more
The engraving machine has been developed to meet the needs of the industry. Versatile: The sturdy pedestal allows the engraving of heavy parts and of various shapes and sizes.
The machine has the ability to switch in less than 30 sec... more
Here we offer a InSystems laser marking Lasergraviereinheit with two roller conveyors. Automatic laser marking of glass substrates Lasergraviereinheit operating voltage 400V AC/50Hz SteÃ¼rspannung 24 V DC Two roller conveyor of Grenzebach Type: SS Type 277-299-C001-00 Content: Monitor, cabinet, Lasergraviereinheit, 2x roller conveyor We deliver with Express shipping / express shipping (DHL, UPS, TNT) Other questions we will be happy to answer the phone for you. Written orders possible by email o... more
pattern table size: 236 x 460 mm
working table size: 200 x 500 mm
working area longitudinal: 300 mm
working area cross: 160 mm
spindle turning speed range: 1900 - 15000 rpm
milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm
space needed: 800 x 900 x 1250 mm
weight: 340 kg
Manufacturer Rofin designation RS marker PowerLine 90 Q built in 1996 State significant traces of use wavelength 1064nm suggestion lampengepumpt laser type ND: YAG laser laser type 2 Q-switch mode power 90 W operating voltage 400 V pulsed AC connection power of 3, 4 kW mains frequency 50 Hz applications, Ablation, structuring, labeling / marking materials for machining mild steel, stainless steel / stainless, aluminum, polymers, fibre-reinforced plastics (GFRP, CFRP) pulse parameters pulse frequ... more
MiniMarker F20 - fiber laser with an output power of 20 W
Scope of delivery:
Power supply with control
Laser beam source renewed 2016, costs 5000.00 euro application software SinMark
Galvosystem with lens (field of work: 100 mm of x 100 mm)
Work surface: T-slot plate
Manual z axis
The laser was appointed in 2011 and 2012, it was shipped with 10 WATT
2016 we have replaced the laser source to 20 Watts performed extensive maintenance work. Cos... more
Here we offer a trump Vectormark compact diode laser system.
Trumpf Vectormark compact diode laser system
Diode lasers cooler DLK 0.7
Hate laser LBA 444 LM21 GSP(5) VVMC
Type: VMc 1
Condition: pre-owned / used
Scope of delivery: (See image)
(Errors and omissions in the technical data, information are reserved!)
We can answer questions on the phone for you.
Written order possible by email or fax
Longitudinal movement of table 160 mm
Transverse movement of the table 300 mm
Adjustability of the spindle 6 mm
Spindle speed 475-20000 R/min
Smallest 1 transmission ratio: 10 Gr. 1: 1.5
Schabloentisch 520 x 320 mm
Work table 200 x 360 mm
Gr. Removal of arm clamping surface 390 mm
Workspace of the pantographs
Rectangle maximum 165 x 335 mm
Ellipse Max 176 x 450 mm
electrical design - voltage/frequency 380/50 V / Hz
Total power consumption 0.55 kW
Machine weight approx. 0.60 t
Engraving machine Fabr. KUHLMANN type GM-1-2
Fabr. # 24.0.0026
Pantograph setting 1:1 to 1:100
Work table 500 x 300 mm
Arbeitstischlaengsweg 300 mm
Work table transverse stroke 180 mm
Working table height 285 mm
Template table 500 x 400 mm
3 spindle speeds 4200/5400/8400 RPM.
Engine speed 2800 RPM.
Dimensions L x W x H 900 x 1200 x 1300 mm
Weight 420 kg
-Tool cabinet with content
used from a reversal of the operation, in good condition
pattern table size: 320 x 450 mm
working table size: 200 x 350 mm
working area longitudinal: 300 mm
working area cross: 150 mm
spindle turning speed range: 1600 - 20000 rpm
milling proportion: 1 : 10/1 : 1,5 mm
spindle drive: 0,25 kW
space needed: 1180 x 980 x 1450 mm
weight: 420 kg
From a reversal of the operation, we offer:
Machine for industrial and commercial use
Engraving, cutting and processing machine are machine IS7000 for large formats.
Here as a complete package with all the bells and whistles
Software Gravostyle 98
Clamping device for clamping and much more...
Gravostyle 8 on request delivery by carriers, on request
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.