Used Glass Engraving Machine for sale (93,468)

Condition: good (used), Year of construction: 2002, The machine is in good condition. However, the computer was stolen. I have the computer from another Intermac machine. If you can configure it. Fedpjuhfh Esfx Aftogh

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Fgodpfx Afovddplsteh

Condition: excellent (used), Year of construction: 2010, Hotmelt, heated edge banding machine. Heated tank Heated hose Heated gun Tank capacity: 45 liters Fedjxbnkdspfx Aftogh Excellent condition, as shown! Can be inspected and tested at our premises, available for immediate pickup!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Automatic spacer bender WHS2 The automatic spacer bender machine WHS is suitable to bend aluminum and Warm Edge bars: Chromatech Ultra, TGI Spacer M, Thermix TX.N Plus, Thermobar, Multitech, Swisspacer Advance, Swisspacer Ultimate. It is possible to create square and rectangular, straight shapes like trapezium, triangle, pentagon and optionally are available curves and arcs shapes. The interface operations are done using a Personal Computer, the program is easy to use and allows the users to manage all the working parameters, as well as set up specific condition for different type of spacers. The program to optimize the work can optimize up to 1,200 different measures of work, considering the type and color of material used and width. The program can be interfaced with the most used optimization software of cutting tables (Perfect Cut, Optima, Albat-Wirsam, Hanic, etc). The program is available in Italian, English, French, Spanish, German. The machinery is equipped with tele-assistance and video-assistance. Technical features Workable spacers: H 6-7 mm; Aluminum / Chromatech Ultra / TGI Spacer M / Thermix TX.N Plus / Thermobar / Multitech / Swisspacer Advance / Swisspacer Ultimate 8-24 mm. Spacer frames min size: 200x280mm. Spacer frames max size: 1800x2450mm in one step (larger size in two steps) Bender dimension: L 4,850mm, W 2,040mm, H 2,550mm. Spacer stock dimension: L 5,500mm, W 1,300mm, H 1,650mm Fsdpfxjv Epfuo Aftjgh

Condition: good (used), Year of construction: 2001, Glass GS/S 600 Roller tenderizer is designed for both sides incision of muscle tissue surface in order to increase the surface of brine absorption and also incision of hard tissues and tendons located in a muscle. Such a process influences the increase of the brine absorption surface and, as a result, very good plasticization of individual muscle elements. Fgedpfx Astzc Absftoh Manufacturer: Glass Model: GS/S 600 Height: 1500 mm Width: 1000 mm Length: 1400 mm Weight: 350 kg Electric power supply: 400V 50Hz 3N Total power: 1,5 kW

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Fgedpfx Afeu Ivauoteh Dimensions 260 x 160 cm Height 215 cm.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Serial number - 4174 Date of manufacture - 2019. Capacity - 150 litres. Fedpfx Afovuhiqotjgh Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, GLASS Cooker with mixing 600 litre. Direct steam jacketed with direct steam injector. Also got glycol cooking. Side wall scrape mixing auction. Year 2023. with personnel steps. Fgjdpfx Aovx Syboftsh

Condition: used, functionality: fully functional, tank capacity: 1,000 l, The Glass VSM/F 1000 is a versatile vacuum mixer that optimizes the processing of meat, fish, fine foods, fruits, and vegetables. Thanks to its vacuum technology, it not only blends but also massages products, improving their texture and quality. Indeed, this mixer is ideal for operations requiring the use of nitrogen or direct steam injection. It also features a mixing arm with a scraper and an electric tilting system, facilitating product unloading. Furthermore, its pneumatic lid ensures safe and efficient operation. Furthermore, the Glass VSM/F 1000 offers a large processing capacity, making it ideal for companies looking to increase productivity. Thanks to its advanced features, it guarantees homogeneous mixing and optimal food preservation. Furthermore, its ergonomic design facilitates cleaning and maintenance, reducing downtime. In short, this vacuum mixer is an essential asset for improving the quality and efficiency of production processes in the food industry. SPECIFICATIONS: Power: 5.93 kW Fodpfx Asu Iafnsftogh Current: 13.74 A Voltage: 400 V; 50 Hz Volume: 1000 L Mj+KikOw

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Fsdpfeu Nhiqex Aftjgh Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: excellent (used), Year of construction: 2020, CATALYTIC COATING EQUIPMENT Fodpfx Aevcc Epjftogh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. Fgjdpfsr Ak Exjx Aftoh the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Year of construction: 2018, HYDROPHOBIC COATING APPLICATION DEVICE Fgjdpfx Afovcc D Eoteh

Condition: new, Year of construction: 2020, CNC engraving machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technische0.321020121002 Daten: Table size 700 mm x 480 mm Weight: 50 kg External dimensions: Fgsdpfx Asf Tnf Ujftoh Length: 700 mm Width: 500 mm Height: 350 mm Accessories : Calculator Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve spray With it versch. Collets and cutters - NEW

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt Fgedpod N Hgujfx Aftjh - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Fgsdoxmhqzjpfx Afteh Model: ABMC-1 Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Condition: used, Year of construction: 1999, Make: DECKEL MAHO, Model: DMC103V, Year: 1999, Serial No.: 28860004142, Control: Siemens, Type Sinumerik 840C, Table size approx. 1,200 x 600 mm, X/Y/Z travel 1,000 x 600 x 600 mm, main spindle speed range 20 - 8,000 rpm, 24-position tool changer, tool holder SK 40, chip conveyor: make Knoll, type 400 K-1/600, year 1999, band filter system: Knoll, operating hours: 9,641. Fgodpfx Afjxg Hyhetjh

Condition: good (used), - All rubber rollers new or as good as new Fodpoulvipofx Aftogh - Belt length 3000 mm - Year of manufacture - Price On request

Condition: good (used), functionality: fully functional, Machine in good condition Fgodpfsxfhxpsx Aftoh with accessories according to pictures

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 102 299940 0889, total length: 3,000 mm, total width: 800 mm, total height: 1,500 mm, working height: 900 mm, input voltage: 400 V, overall weight: 620 kg, type of input current: three-phase, power: 3 kW (4.08 HP), Lisec butyl extruder from 1989 under refurbishing at our warehouse in Belgium R2025 Fgedpfxexhdp Ne Aftjh

Condition: used, Year of construction: 2016, SCHIATTI FPS SME 10 – Year 2016 Straight Line Edging Machine 10 Wheels Variable angle 0°/45° (Thickness range 3–30 mm (3–25 mm with variable angle)) Minimum dimension 80x80 mm Max load 1,000 kg Work surface height 812 mm Installed total power 17.7 kW Fedpexmkglsfx Aftegh Air consumption 12 Nl/min Feeding speed 0.5–5.5 m/min Overall weight 3,188 kg

Condition: like new (used), Year of construction: 2016, operating hours: 4,600 h, functionality: fully functional, year of last overhaul: 2022, Vertical CNC left to right 2600x5000. With or without washer. For milling, drilling, and edging glass on all 4 sides. Thickness 3-25 mm. Fgodpoxlt H Sefx Afteh

Condition: used, Year of construction: 2022, 10 heating zones, length approx. 17,000 mm, circulating cooling section, length approx. 20 m, chain-driven, 15 trays, product-specific pick-up tools Fgsdpfx Aew Ryw Asftjh +++ Attention: This position is part of an online auction! +++

Condition: good (used), • Type – LV 1604 • Serial number 280160 • Washing height 1600 mm, open at the top, Fgedpfjxfrirox Aftjh • Minimum 160 x 320 mm • Glass thickness 3-15 mm • Very clean machine, little used. • Price on request

Condition: used, Year of construction: 2023, Drawing no. 2022040, "Cutting System B10 / WM", control, manufacturer Siemens, type Simatic Panel, cutting gantry, roller cutter, belt conveyor, L approx. 2,500 mm, W 1,200 mm, discharge belt conveyor, L approx. 1,500 mm, 1x flat glass washing machine, manufacturer Buxtrup, type WH800/R, year 1997, serial no. 300287, power 37 kW, control, manufacturer Siemens, type Simatic, L approx. 2,500 mm, horizontal flat glass washing machine, extraction Fjdpfx Aew Ry Afsftegh +++ Attention: This item is part of an online auction! +++