Wire erosion / EDM

Sodick AQ300l

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Dsdpfsyh E S Dsx Affjkk Machine is powered for inspection

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm Dkodpot Hxbwofx Affjk total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg Dodpsmmfwujfx Affskk The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Dodpfxjxz E Srj Affekk

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain Dkedpfxsu Nda Ee Affek *

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 Dsdpfsxuh Rdjx Affokk With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine is currently operating in an Italian high-end facility specializing in individual components and custom manufacturing for Formula 1 as well as the aerospace sector. The machine is in exceptional condition. Photos are available upon individual request and under strict confidentiality. CNC turning/milling center (multitasking) with full 5-axis simultaneous machining - 2 turning spindles (main spindle + sub spindle) - B-axis milling head (swivelling milling head) + C-axes on both turning spindles - Designed for complete machining (turning + milling + drilling + threading + contouring) Working area / capacities: - Max. turning diameter: 640 mm - Max. turning length: 1,100 mm - Distance between spindle noses (min./max.): 250 / 1,350 mm - Distance between centers (min./max.): 125 / 1,225 mm - Bar capacity / spindle bore: 71 mm - Chuck diameter (typical for A2-8 configuration): 254 mm (10") Main spindle (left): - Spindle nose: A2-8 - Bar capacity: 71 mm - Speed range: stepless up to 4,500 rpm - Spindle power (depending on spindle package): approx. 22/18.5 kW (alternatively 15/11 kW available depending on package) Sub spindle (right): - Design: fully-fledged sub spindle (workpiece transfer/complete machining) - C-axis available (for milling/indexing operations) - Clamping device: hydraulic chuck (compatible with A2-8 configuration, typically 10") Milling unit / 5-axis kinematics: - B-axis swivel range: 225° (−120° / +105°) - Y-axis: ±125 mm (250 mm total) - X/Y “square stroke” / machining window: 250 mm × 250 mm - X-axis undercut below spindle center: 125 mm (for extended machining range) - C-axis on main and sub spindle (C1/C2) Tool / milling spindle (typical version): - Milling spindle in B-head for drilling/milling/threading/simultaneous machining - Speed (depending on package): approx. 8,000 rpm (higher speeds optionally available) - Power (depending on package): typically up to 18.5 kW (package dependent) Tool handling: - Automatic tool magazine (ATC): 120 positions - Automatic tool changer (magazine/ATC) Control / software: - Nakamura NT-Smart X user interface / process management - 5-axis capable CNC platform (CAM-compatible complete machining, simultaneous machining) Typical applications and process capability (for your listing): Djdpfx Ajynmglsffskk - Complete “done-in-one” machining: turning + milling + drilling + threading + 5-axis contours

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance Dsdpfx Afexw N S Ijfekk - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Dsdjx Enh Tepfx Affokk This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, total height: 2,985 mm, overall weight: 5,000 kg, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Additional equipment • Electronic Handwheel • Chip conveyor • Oil skimmer • Emulsion flushing gun Dkodpfjx D E H Ijx Affok • 2 x Hydraulic vice • 25 x Clamping chuck BT40 Machine Benefits Technical Machine Benefits • Table dimensions: 1000 x 450 mm • Distance spindle nose - table surface: 150 - 775 mm • Max. Tool diameter with free neighboring places: 125 mm • Max. Tool diameter with occupied neighboring places: 80 mm Extra Information Machine still under power Dimensions Machine Depth 2158 mm