Used Wire EDMs with x-travel of 300-399mm for sale (57)

Condition: good (used), Year of construction: 2004, X-axis travel - 400mm Creb Hn Hsv Sw Hgj Dmob Y-axis travel - 300mm Z-axis travel - 250mm Worktank length - 980 mm Worktank width - 730 mm Worktank height - 250 mm

Year of construction: 1995, Condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Creb Hn H Dehktttemob Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Creb Hn H Dov Dkvrjmjb Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Cob Hn Hjuqackj Dmsrb

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder Crjbsv Ul I Do Hn H Dmsb - Standard interfaces (PCMCIA, Ethernet, etc.)

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, net weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Creb Hnjv Im R Ts H Dmeb Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min Ceb Hn Hsv Iazle Dmorb U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Many spare parts and wear parts

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Controller AGIEVISION 5 Max Werkstückabmessungen LxBxH = 750 x 550 x 250 mm Max. Werkzeuggewicht 400 kg X Weg 350 mm Y Weg 250 mm Z Weg 256 mm Taper 30 degree at 100 mm U/V Wege +/- 70 mm Diamenter of wire 0,15 - 0,33 mm Laenge des Arbeitstankes 750 mm Breite des Arbeitstankes 550 mm Höhe des Arbeitstankes 250 mm Automatischer Drathverschub Strombedarf 9,3 kVA Capacity of dielectricum tank 700 litre Gewicht 2600 kg Dimensions LxWxH = 1640 x 2040 x 2200 mm Cjbsuu Rp Nj Hn H Dmjrb Very good condition. It will be sold because of company liquidation.

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 Year of manufacture 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with 4x USB connection for program transfer Crebsv Awnre Hn H Dmsb Incl. AGIESETUP 3D The machine has already been completely cleaned, overhauled and tested by us. We are also happy to offer you commissioning and training. Optional: - Transport including installation - Cooling unit - CAM programming system

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Crjb Hjv Aycxsn H Dmob Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Number of filter cartridges: 16 Units Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading Csbov Tpuls Hn H Dmerb - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies - DIN-compliant wire spool holder

Condition: used, CUT 200, year 2011. Fully functional. Available from the end of March. Crsbev Ig Ais Hn H Dmjb

Condition: used, TECHNICAL DETAILS - Table dimensions : 680 x 450 [mm] - Max. part dimensions : 1000 x 550 x 220 [mm] - Max. part weight : 750 [kg] - Strokes X,Y, Z : 350 x 220 x 220[mm] - Strokes U,V : 350 x 220 [mm] - Wire diameter : 0,1 à 0,33 [mm] - Max. wear : +/- 30 [°] - Three-phased supply tension : 400 [V] - Dimensions ( floor surface x height) : 3490 x 23254 x 2410 [mm] - Weight : 2700 [kg] - Welding hours : 350 [h] EQUIPMENT - CNC CHARMILLES - Touch screen LCD 19' TFT - AC CAM EASY 4.0 license Cebev Annco Hn H Dmsrb - Remote control - Automatic threading and re-threading - Thermo stabilisation - Anti-collision - Large coil option : 16 and 25 [kg] - Central filter unit with 4 filters - 2 de-ionisation unit - CSW 900 cooling unit - Prearranged for rotary table

Year of construction: 2017, Condition: like new (used), Table size 700 x 480 mm Crjb Hn H Dei A I Hfomob X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 2 Year of manufacture 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Crjb Hsvx Thmen H Dmjb Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with 4x USB connection Incl. AGIE setup 3D The machine was cleaned, overhauled and thoroughly tested by our technicians. We are also happy to offer you commissioning and training.

Condition: used, Year of construction: 2007, Functionality: fully functional, Cliché washing machine for sale Process steps: cleaning, rinse and dry The plate is automatically drawn into the processor by the dragging rolls Transport speed and temperature controlled by the computer Equipped with two brushes with alternative and floating movement Gas aspiration inside the tank via two blowers Possibility to connect the unit directly to your exhaust systems Temperature inside the solvent drum via the heater Max plate width 920 mm Min plate length 220 mm (with sticky plate any size) Drum recycle solvent capacity 35 Cjb Hn Hevyh Auo Dmorb Power 1,5 Kw Electrical 230V MONO 50/60HZ Dimensions 1830 x 1440 x 1060 mm

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Csb Hn H Dov Tpnromorb Input voltage: 380/400 V Power consumption: 12 kVA

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, Functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, net weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Option 0.1 mm. Cobevvlhyj Hn H Dmsrb Available in our workshop in Semsales during March.

Condition: used, Year of construction: 2005, AGIECUT Challenge 2 eCut Year of construction 2005 TECHNICAL DETAILS X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 256 mm U/V axis: ±70 mm Cone angle: 30°/100 mm Cutting rate: > 300 mm²/min Quality: Ra 0.1 µm Thread height: 250 mm Tapping die: 1/2 mm Wire diameter: 0.1 - 0.33 mm Workpiece height: 250 mm Workpiece width: 550 mm Workpiece length : 750 mm Workpiece weight with/without bath: 200 / 450 kg Crob Hn Houa Uzfe Dmob MACHINE DETAILS Bath size : 700 l Dimensions : 2215 x 2215 x 2220 mm Net weight : 3600 kg

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Crjbsvuqtfe Hn H Dmob Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: refurbished (used), Year of construction: 2006, AGIECUT Challenge V2, Year of manufacture 2006 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg (in bath / without bath) Achieveable surface quality: Ra: 0.2 µm Average contour tolerance Tkm +/- 2-3 µm Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Csb Hn Hjvrcm Sj Dmsrb AGIEVISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2215 x 2215 x 2220 mm Net weight: 3600 kg The machine is cleaned, overhauled and tested by us after receipt of the order. After completion, we will provide you with training on your machine in-house. We will then prepare the machine for transport. We can also offer you the following as an option: - Transport - Commissioning - Cooling unit - CAM software

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Cjbjv Tn A Uo Hn H Dmerb Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Crsb Hovax Iujn H Dmjb Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, AGIECUT Classic 2S Crjbouzvkge Hn H Dmeb Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Csb Hnot I Dtne H Dmsrb Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.