Kuhn gf 7501 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bdalopg7jq CMS GIOTTO 2A-ATC+GF twin table with ATC and boring:Twin Table Machining Center, each table 62-3/4" wide x 59" deep, tables can be locked together to create a 126" x 59" work surface. -- Table is milled in a grid pattern for round-sectioned gaskets that can be inserted into the grooving to delimit the vacuum area used. --Arranged on this grid pattern are threaded holes with bushings that can be opened or closed to create vacuum to only that ar... more
5
Thread-cutting machine, pipe thread cutter Hh3f3kcua -for maximum 2 in. pipe size Dies 1 "inch -Tems on 3 gear Dimensions 550/360/H240 mm Weight 55 kg more
4
Siemens 6GF2005-0BC01 Videomat IV, used, good condition, 100% functional Bcj8wakc3o more
5
Machine cleaned and tested X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Bciuqr8ao8 Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. more
2

AGFA AccuSet 800 Plus

More Agfa Accuset 800
St.Leon-Rot bei Heidelberg, GermanyGermany dealership location
6602 km
2001
ready for operation (used)
Machine type: AccuSet 800 Plus Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: G8ym3a738 Available from: Immediately available Machine is: on Stock Capstan PostScript laser imagesetter standard equpmen... more
1
Elect./Voltage: Bbuy9e9ogn GFS Crossdraft Spray BoothLarge Walk In Spray Booth more
5
Thread-cutting machine, pipe thread cutter -for maximum 2 in. pipe size B8fb790c JAWS 2 ' inch -Tems on 3 gear Dimensions 550/360/H240 mm Weight 55 kg more
3
Siemens 6GF6220-2CD monitor DSC1703 DCT, serial number according to the photo, used, plastic frame damaged otherwise normal wear, 100% functional Ss3a3s more
9

Film processor AGFA AccuSet 800 Plus

More Agfa Accuset 800
Nürnberg, GermanyGermany dealership location
6749 km
1992
ready for operation (used)
CTF Imagesetter AGFA AccuSet 800 PlusYear 1992 - Serial-No. -Available Immediately - -can be inspect- -on stock - can be test- Bdi8jerd2w more


kuhn gf 7501
daily

New machines via email!

Stay updated!
3
Universal - Werkzeugfraes - and boring machine Manufacturer: Hermle Type: UWF 1001 H Year of construction: 1994 Control: HEIDENHAIN TNC 426 Traverse paths: X/Y/Z 700 x 550 x 500 mm Table clamping surface: 1000 x 500 mm Tool changers: 32 items Tool holder: SK 40 8zzpebfnb Probe HPC spindle with 36,000 rpm Spindle newly stored Weight: approx. 4,750 kg ... more
3
WERKZEUGFRÄSMASCHINE DECKEL FP 1 AKTIV - DIGITAL - 07-07-234 Lieferzeit: sofort Nummer: 07-07-234 Hersteller: Deckel Typ: FP 1 Aktiv - Digital MASCHINENDATEN Baujahr: ca. 1987 L x B x H: ca. 1600 x 1200 x 1700 mm Gewicht: ca. 650 kg Guter Allgemeinzustand TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige (Heidenhain TNC 113) Verfahrwege: X - Achse: ca. 300 mm Y - Achse: ca. 150 mm Z - Achse: ca. 340 mm H8rnapsro Tischaufspannfläche: ca. 600 x 250 mm ... more
5
Thread-cutting machine, pipe thread cutter -for maximum 2 in. pipe size Dies 1 "inch Csizjx7s Drive about 3 gear Dimensions 550/360/H240 mm Weight 60 kg more
2
Siemens 6GF3440-1LE10 code reader, serial number according to the photo, used, low wear, 100% functional, included with com. photos Nejyr more
4

Development machine Agfa Acura 95

Krefeld, GermanyGermany dealership location
6365 km
2008
good (used)
Technical data: CTP Auswasch-gumming station Glunz & Jensen Agfa C 95 / Azura C95 for process-poor printing plates Lstnt more
4

Hand screw press NEHER HSPGF 40 100

Paderborn, GermanyGermany
6488 km
1975
excellent (used)
used Hand Screw Press Manufacturer NEHER Model HSPGF 40 100 Haq2ssz YOM 1975 Prssure = 40 ton Table = 650 x 600 mm Table bore = 120 mm Ram = 300 x 600 mm Daylight = 480 mm Weight approx. = 1600 kg more
5

Werkzeugfräsmaschine IMATEC FU 145

Bruchsal-Büchenau, GermanyGermany
6601 km
1986
good (used)
WERKZEUGFRÄSMASCHINE IMATEC FU 145 - 07-07-229 Lieferzeit: sofort Nummer: 07-07-229 Hersteller: IMATEC Ngyrf Typ: FU 145 MASCHINENDATEN Baujahr: ca. 1986 L x B x H: ca. 1900 x 1800 x 2100 mm Gewicht: ca. 3000 kg Guter Allgemeinzustand TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige Heidenhain Positip 855 Verfahrwege: X - Achse: ca. 1130 mm Y - Achse: ca. 300 mm Z - Achse: ca. 500 mm Tischaufspannfläche: ca. 1450 x 320 mm Spindel: Drehzahlbereich: c... more
5
Fliehkraftschnellspannfutter, centrifugal lining, three-jaw Chuck -Aussen ø 270 mm Clamping range ø 90-140 mm Recording ø 140 mm Pitch circle ø 170 mm Qk8dfgk8k Weight 25 kg more
3
Siemens 6GF3420-0AA20 code reader, serial number according to the photo, used, low wear, 100% functional, included with com. photos Bcj8wj2iqp more
5

CNC Lathe INDEX GFG250

More Index Gfg 250
Göppingen, GermanyGermany dealership location
6699 km
1987
used
turning diameter 250 mm turning length 500 mm control Siemens Sinumeric System Y33ue3zb7 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
Bdje3ocyv2 AGFA Acento I S year 2005 119000 plates SAL50 Convoyeur et stacker RIP Apogee X6 without processor (possibility to get one) more
2

Fork Lift Truck TOYOTA 42-7FGF18

Remscheid, GermanyGermany dealership location
6419 km
2003
used
weight max. in kg 1550 kg weight of the machine ca. 3 t Dwb90a more
5
Forklift battery charger, industrial charger, truck battery charger, industrial charger Performance 80 volt Performance 30 A Bbydlkui Port 380 Volt Dimensions 555/430/H750 mm Weight 56 kg more
3
Siemens 6GF3420-0AA20 code reader, serial number according to the photo, used, low wear, 100% functional, included with com. photos Bcj8wtmoeq more
15
Hours of operation: 5544 h! Bdicqenvsp Capacity: 3000kg Lifting height: 4, 30 m Height: approx. 2, 10 m Mast: Triplex (triple) Free lift: approx. 1, 45 m Gearbox: Converter Tyres: Solid rubber Front tire: 28 × 9-15 Rear tyre: 6 50-10 incl. side-shift including forks: 1, 20 m incl. 2 x working lights front Length (without Gabelz.): approx. 2, 80 m Width: CA. 1, 25 m Weight: approx. 4500 kg valid accident prevention regulations until 03/2019 SER. No.: 5FGF3060022 Toyota LPG fork... more
2

Cutting mill DREHER Schneidmühle Dreher Typ S 26/26 GFS Spezial

Zuzenhausen, GermanyGermany dealership location
6611 km
ready for operation (used)
Power: 7.5 Suitability: Plastics, wood, organics Bdbhcwxrsh Rotor diameter 260 mm rotor width 260 mm 3 blade rotor 2 Statormesserreihen spout cross-section approx. 260 x 260 mm drive 7,5 kW Obliquely positioned grinding housing with increased grinding Chamber, especially for large volume parts (Serial number: 10438 / second-hand machine) more
6
CNC 4-axis machining centres MIKRON type UMC 600 BAZ, tool room milling machine Fabr. No. 5.31.14.02 built in 1997 CNC railway control system Heidenhein TNC 426 Routes x 600 mm, Y: 600 mm, w: 500 mm Hx3wfibhw Table size ø 710 mm, with star-shaped arrangement of T-slots 14 mm ISO 40 spindle adaptor Spindle speed 5-6300 RPM. Speed X + Y = 0-15000 mm / min, Z = 0-12000 mm / min. Rapid traverse speed X + Y = 15 m / min, Z = 12 m / min. Spindle drive 9 kW 44% = 100% = ED ED / 6 kW Power s... more
5

Toyota 02-8FGF18

SC Raamsdonksveer, NetherlandsNetherlands dealership location
6247 km
2007
used
Bdg7ojxd0e more
5
Forklift battery charger, industrial charger, truck battery charger, industrial charger Power 48 volts Wnbz0fx7l Performance 140 A Port 380 Volt 555/530/H915 dimensions mm Weight 134 kg more
4
Rexroth MGF3-31 / 040RA07VM-A433 MNR: R900970908 FD: 10928, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Nejcb more
6

Screening machines GFA 16/50-1

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
ready for operation (used)
GFA / Metso 16/50-1 printing machine screen surface: 5000 x 1600 mm - 1 Decker Dwbjxy Drive: 11 kW electric motor Including: Ferdernkonsole and new springs. more
4

Cutting mill DREHER Schneidmühle Dreher Typ S 42/65 GFS Spezial

Zuzenhausen, GermanyGermany dealership location
6611 km
ready for operation (used)
Power: 45kW 5-blade rotor 2 Statormesserreihen Rotor diameter: 420 mm Working width: 650 mm Inlet cross section: approx. 420 x 650 mm Ngx0l Drive motor 45.0 kW With noise protection equipment Obliquely positioned grinding housing with increased grinding Chamber, especially for large volume parts (Serial number: 10719 / second-hand machine) more
5
AGFA Avantra 44S Bdgmkrf9iw with AGFA Online-Plateprocessor with one extra Set of rollers with RIP IT Xante more
1

AGIECHARMILLES +GF+ CUT300 - 2013 Wire cutting EDM machine AGIECHARMILLES +GF+ CUT 300

Rolle, CH, SwitzerlandSwitzerland dealership location
6581 km
2013
ready for operation (used)
DEMO MACHINE WITH VERY LOW HOURS Bdg3e3dvzz more
5
GFK-barrel storage tanks, storage tanks, silo, tank, fertilizer storage silo Material Fiberglass Storage silo 750 litres -on foot -Mannloch Wmvw9prmz 1650/920/H900 dimensions mm Weight 130 kg more
3
Rexroth VAM40. 2-PB-NA-TA-TA-VB-MA-1608-NN Control Panel IndraControlV MNR: R911170772 GF1, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcjyfmtaws more
6

Screening machines GFA 20/60-2

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
ready for operation (used)
GFA screening machine type: 2HPP screen surface: 6000 x 2000 mm - 2 Decker Plastic screen opening: upper deck 20 mm, lower deck 8 mm. Drive system: two electric motors of respectively 15 kW. Including: Springs and motor bracket. Gutjq2z more
4

Cutting mill DREHER Schneidmühle Dreher Typ S 26/26 GFS

Zuzenhausen, GermanyGermany dealership location
6611 km
ready for operation (used)
Power: 4 KW Suitability: Plastics, wood, organics Hydmxwt8g Rotor diameter 260 mm rotor width 260 mm 3 blade rotor 2 Statormesserreihen spout cross-section approx. 260 x 260 mm Drive 4 kW Weight 600 kg (Serial number: 10436 / second-hand machine) more
6

Crankshaft Milling Machine GFM FKW 240

Monheim, GermanyGermany dealership location
6403 km
1976
used
workpiece length 5300 mm swing dia. 860 mm clamping length 5300 mm max. crank-radial 200 mm H7co9jpt8 weight of the machine ca. 82 t Excellent condition - still in production - with div. steadies and cutters - documentation further technical details: - max. crankpin-Ø: 330 mm - number of crankpins to be cut: 1 - 8 - max. travel of milling slide: 4400 mm - max. swing-Ø over the steady rests: 860 mm - max. cutter-Ø: 1630 mm - cutter speeds: 12.5 - 16; 0 - 20; 5 - ?; 24.6 - 26.9 rpm - workpie... more
6

CNC Lathe INDEX GFG 100

Düsseldorf, GermanyGermany dealership location
6394 km
used
turning diameter 600 mm turning length 500 mm control SIEMENS 810D spindle diameter in front bearing 160 mm turning speed range - spindle 25 - 1450 U/min spindle motor 37 kW Msjpnc number of tapers in turret head 16 rapid power traverse in X-and Z direction 10 m/min powered chuck diameter 315 mm spindle bore 100 mm tool holder -shaft diameter 50 mm total power requirement 60 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,7 x 2,5 x 2,7 m Machine retrofit in 1999 with SI... more
5
Forklift battery charger, industrial charger, truck battery charger, industrial charger Power 48 volts Performance 150 A Port 380 Volt Dimensions 555/410/H750 mm Fzxs0ah Weight 84 kg more
5
Kuhn Transrollspindel L = 1230 mm adjustment range from Studer S60: 810 mm, Ø 40 mm, pitch: 10 mm, Ø ball cage: 63 mm, Ø mounting flange: 93 mm, Ø cones: 25 mm, Ø cones thread: 30 mm, used, normal wear, 100% functional Mwtw2pe more
4

Screening machines GFA 16/42-2

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
ready for operation (used)
1600 x 4200 mm - 2 deck screen machine Nel2x more
4

Falling film evaporators KUEHNI AG DN-200

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Condenser: "Demister column" (1 x), manufacturer Kühni AG Allschwil, type DN 200, Masch.No. 225323, built 1988, material stainless steel (1.4435), Abeitsdruck VP / 2 bar, test pressure 7.8 bar, maximum temperature-20 / + 200 Degr. (C). Nga8f more
5

CTP UNIT AGFA ACENTO II E

SwitzerlandSwitzerland
6694 km
2006
excellent (used)
Counter: 36.496 h Bdgyw7bz0i Format (cm): Min plate size: 324 x 370 mm Max plate size: 830 x 660 mm DPI: 2400 // Diodes: 32 // NM: 830 Exposure time: 6541 hrs. // PPH (plates / hour): 21 Plate winding cycles: 145,943 Plate input: Type Multiloader MA-L4300 Cassette: 3 Equipment / Additional information: Integrated Bacher punch 425 mm Hardware: PIF I / F conversion box Condition: Very good condition / 1 service per year more
3

CTP Agfa ACENTO-E, Year 2005

Saint-Etienne, FranceFrance
6495 km
2005
good condition (used)
Offered as owner : CTP Agfa ACENTO-E, Year 2005 Ref. D4730 . CTP 4-up Thermal PlateSetter . Counter : 52.300 plates . 16 channel infrared laser diodes . Plate size : Min 324 x 370 mm - Maxi 830 x 660 mm . Plate Thickness: 0,15 - 0,30 mm . Speed: 11 plates/hour at 2.400 dpi Equipped with: . Agfa Autoloader SA-L 4300 II for 100 plates (Year 2015) . Online Plate Punching Online Bacher 425 . Blower Unit . Bridge 4 Pages . Online-Wash/Gum-Unit Agfa Azura C85 (Year 2010)... more
4
Gear motor electric motor Speed 125 U/min Performance 0.44 kW -ED 60% Type B5 angle 2hecimqis Diameter shaft Ø 25 mm Protection type IP44 Brake Dimensions 410/260/H225 mm Weight 22 kg more


kuhn gf 7501
daily

New machines via email!

Stay updated!

to

to

Edit search
KUHN GF 7501
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close