Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
7
Characteristic features: Overview of the units: • CNC machine with 3 interpolating CNC-axes and integrated SPS control • Approx. 60 to 140 window units per shift, depending on the specification • For the machining of: Wdt2uyw - Ventilation slots and drain slots - Dowel and transom holes - Screw connections for steel reinforcement - Triple hole drill and gear slots - Lock case marking by drilling and punching - Holes for tilt and turn gears - All preparations can als... more
11
PVC CNC Machining Center Elumatec SBZ 609. Adapable to any profile system. Profiles up to 4000mm Bctgo7ywi7 Good condition more
9
Center WEGOMA 1100 of machining and cutting in perfect working condition. Video on-demand use. Bcuzhydhdj more
7
We split 1 and SBA 7 due to new acquisition up on end of July of our Haffner SBA. Nfnsf The machine is built in 2010 and currently still full with us in use. Visits are up to the 26.07.2018 possible! Please simply register :) for questions more
6
CNC long bed profile machining center serial. HEFI type LBZ 6200 Built in 1991 Technical data: Btu8cqv X trail 6200 mm Y way 460 mm Z route 430 mm 6200 x 500 mm table size Spindle speeds of stepless 46 - 6000 RPM. Spindle carrier ISA 40 Speed infinitely variable 0-2400 mm / min. Rapid traverse X / Y 0-14 m / min. Rapid traverse Z 8 m / min smallest resolution 0.001 mm Number of tools 22 Weschelzeit approx. 2.5 sec. Spindle drive 7,5 kW with -1 angle milling head BENZ translat... more
7
DEM 12 machining center: €35,000 PVC range Rehau flow backup profiles Bccecqcfpr With the plasma Center DEM 10 screwing reinforcement machining: €50,000 Optional: automatic unloading LAD wall of 10 traps set and carpet: 15 €000. Center year 2008, Plasma year 2012 year 2013 LAD. Available in August 2018 more

Working centre STB Multifab-3000 STB Multifab-3000

Casarrubios del Monte (Toledo), SpainSpain dealership location
6118 km
2005
good (used)
Working centre STB Muldtifab 3000 in good condition. We can install the machine if you want. 2q8qyu more
4
Automatic PVC Cutting machine Pertici Scarabeo. D97owwch Industrial label printer Zebra Industrial Vaccum and Belt for scraps. 2008 It's possible to dismantle and load the machine in a truck. more
7
Stück 806019 STBAZ 1.00-JC-VOR-9; Vorlegemagazin für taktendes Vorlegemagazin 9 Profile • Automatisch mit 9 Profilplätzen ausgerüstet • Profilauflage zur Vorpositionierung des Profilstabes • Bestückung nach Beladeliste • Profilstablänge: 6 500 mm max. • Profilstablänge: 650 mm min. • Reststückeintransport ab Profillänge ᐳ 650 mm • Profilsystemunabhängige Transporteinrichtung • Aufstellung von Durchlaufrichtung je nach rechts nach links oder von links nach rechts Stück 806020 STBAZ 1.00... more
6
All sawing, milling, drilling and marking operations on PVC profiles are gathered in one machine controlled by a computer. Stacking of 10 profiles (max 6,5 m length) Automatic cutting in all angles between 30° and 150° with accuracy of 0,1° by means of servo motors Able to work in high speed and precision thanks to 7 axis controlled by servo motors F3fe3qvru Ability to open drain slot routing, drilling and milling at variable angles Automatic conveyor belt system to transport scrap profile ... more


Cutting an...
daily

New machines via email!

Stay updated!
8
Equipment: - loading warehouse - two screwdrivers for reinforcement with screw feeders (mounted above the magazine - screwing does not interfere with machining) - automatic height adjustment of the profile - 20 processing units (including two aggregates for cutting the rebate, duplicated aggregates for processing door profiles T) Izevmz9 - compact and solid construction - possibility of teleservice - diagnostics via the Internet - barcode reader - receiving table with grapple adjustable... more
1
Profile machining center (3.250 mm) SMA-REF-5925 Type: window construcion (metal) milling machines Manufacturer: Schueco BJM Model: PBA 3250 Year: 2006 Spindle: 5,5 kW 5.400 rpm Tool changer Working range: 3.250 mm Features: pneumat. workpiece clamping Housing Condition: 3r2fdb7ly ready for action under power Location: Eastern Germany Availability: on demand more
3
Profile Machining Center serial. ELUMATEC type SBZ 130/01 Baxeg7zew7 Built in Sept. 1993 Technical data: Machining length 6500 mm Milling range x Z - axis 300 mm Cutting area Y – axis 400 mm Z - axis milling area 265 mm Rapid feed X 1 45 m / min Rapid feed X 2 / Y / Z 18 m / min Positioning accuracy +/-0.1 mm Spindle speed 1-6000 RPM. Tool length of 200 mm Tool diameter of 80 mm Tool changer for 8 Wkzg. Tool holder BT 30 with -8 chucks can be moved CNC control E 500 used, in... more
7
2 CNC controlled axis Gripper with linear motor - Carbide saw blade 500 mm - Electric rotation motor of head at 45° - 90° - 45° - Pair of horizontal pneumatic clamps with low pressure device - Pair of vertical pneumatic clamps with low pressure device - PM4I Label printer - Motorized chips and waste cut conveyor complete with suction outlet for chips separation. - - Blade motor power: 2,2 kW - Blades speed: 2800 rpm - Maximum profile dimensions: width 130 mm, height 140mm - Minimum p... more
11
806235 STBAZ-PVC-300-X – machining központre 300 ablakegység 8 hours. order number, description and heading summary 84651010 total 12-806235 STBAZ-piece PVC-300-X 1 machining center STBAZ other: 12-806236--PVC-profiltár VOR 9 1 9 profile for 12 -806237 STBAZ-PVC-PUSCH-LM-M 1 profile-12-806238 STBAZ a system linear motor-1 PVC processing of PVC-RM module can be fitted with automatic profilrögzítő system engine driven number 8 (4 alapcsomagban) zellőztető, water drain, decompression, copy STBAZ-... more
3

Processing center RAPID MFC I Evolution

Grosselfingen, GermanyGermany dealership location
6663 km
2016
as good as new (ex-display)
In feed magazine for 10 PVC profiles CNC Control, scanner Screwing station inside Mypu2 Milling and drilling module MFC with aggregates which are placed on a ring 360 degree technology Off transport Out feed axis Profile dimensions: Maximum width 125 mm, Maximum height 130 mm All common door and window-profiles can be processed Piece length: Minimum inside dimension: 200 mm, Maximum outside dimension: 3500 mm Standard configuration: 6 drilling units 0,75 kW, 2 milling units 2,2 kW more
6
Aluminium profile machining center serial. ELUMATEC type SBZ 130/01 Built in Dec. 1996 Technical data: Traverse path X 6300 / 6700 mm Y stroke 400 mm Travel in Z 265 mm Spindle speed 1-6000 RPM. Feeds Y and Z Max 18 m / min Feed X up to 45 m / min Positioning accuracy +/-0.1 mm Tool length of 200 mm Tool diameter of 80 mm Tool changer with 8 Wkzg. Tool holder BT 30 5.5 kW Bap2nhzmfy with -3-axis CNC colour control, Floppy disk drive, capacity 200,000 sets. Interface -8 ... more
2
Automatic CNC machining centre with 4 controlled axes, designed for processing of PVC profiles. It consists of anautomatic bars loading magazine, which feeds, thanks to CNC gripper, a multi-spindle machining module with optional reinforcement screwing unit. ACCESSORIES: 9 drilling/milling units complete with high-frequency spindles. 2 screwdrivers. LOADING MODULE Profi les to be loaded automatically, max. dimensions: Length = 4000 mm; Width = 120 mm; Height = 130 mm. Bcci0zlalq P... more
6
CNC profile machining center serial. SCHLEICHER type DNC 6000 Masch.# 469101 year of production 1992 Technical data: Machining length x 6000 mm Working width Y 300 mm Z depth 180 mm Drilling capacity in St. 16 mm Drilling capacity in aluminum 20 mm Drilling capacity in Gg 18 mm St M 12 thread cutting Thread cutting alloy M 18 Tapping Gg M 16 Number of Exchange stations 6 infinitely variable spindle speeds 0-3000 rpm. Travel speed of the machine Portales to 54 m / min. Clqabtf 5... more
4

Stahlzuschnittzentum kanning WK-STZA-350

Berkendeich, GermanyGermany dealership location
6469 km
2016
new
STEEL CUTTING MACHINE with ONLINE PC STEUERUNG350 fully automatic steel cutting machine for Armierungsstahlzuschnitt in single or double-section, depending on requirements. Optimized cut with remaining length recovery. The system consists of an automatic Magazine feed with 12 seats, a steel saw and a belt conveyor for outfeed of the cut steel profiles. Offcuts are encouraged to length in a rest length basket, outfeed or trashcan. Processing of steel profile takes place in a continuous process, w... more


Cutting an...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close