Used Machines with a clamping force of 250 - 999 kN for sale (253)

Condition: good (used), Year of construction: 1998, Screw diameter 25 mm Closing force 25 ton Opening stroke 350 mm Weight 2,900 kg Hjdpfxevxh Iuo Aftofn

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Hfodpfx Aew Ebpweften Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036943, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, straightforward operation, and short delivery times. This machine can be applied in a wide range of industries, such as packaging, electrical and electronics, medical technology, and automotive. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine design – Fast delivery times enabled by the basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: kN 800 • Max. mold opening force: kN 120 • Clearance (h x v): mm 470 x 420 • Mounting platen (h x v): mm 610 x 560 • Mold installation height min. - max.: mm 150 - 400 • Opening width: mm 750 • Max. mold opening stroke: mm 350 • Ejector drive: electric • Ejector stroke: mm 100 • Ejector force forward/back: kN 22 / 22 • Ejector speed forward/back: mm/s 300 / 300 • Max. mold weight: kg 600 INJECTION UNIT • Screw diameter / type: mm 40 / Standard • Effective L/D ratio: 20.0 • Injection pressure: bar 1860 • Shot volume: cm³ 201 • Shot weight at max. stroke for PS: g 183 • Injection speed: mm/s 200 • Injection flow: cm³/s 251 • Screw drive / speed: rpm 334 • Plasticizing rate (standard): g/s 24.7 • Nozzle contact force: kN 34 ELECTRICAL PARAMETERS • Connected load: kW 20.6 • Installed heating power: kW 11.5 • Power supply: V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: t 5.6 • Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface for cascade control, 4-fold • Euromap interfaces for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression molding function Hfjdow Ur I Ujpfx Afton • Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Hfsdow Efy Tjpfx Aftjn Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Hedpfevy Anxex Aftsfn Type: Vertical Drive: Hydraulic

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Hfsdpfx Afsilhfcoten

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0 Hodpfxjud H Dme Aftjfn  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: like new (used), Year of construction: 2020, Clamping force: 88 t Screw: 36 mm Shot weight: 167g /PS Hodpfx Afevx Uywjtsfn

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Standard Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 150-250 mm Hfodsumzntjpfx Aftsn Platen daylight fixed/variable min.-ma. : 375-475 mm Wight on movable mold half. max. : 110 kg Ejector force/stroke max. : 30/60 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 3829 Machine is like new!

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested Hjdpfx Aou Dmgqsftsfn English language

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Hfsdpfotrhv Ssx Afton Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: like new (used), Year of construction: 2021, Engel VC320/80 fast track (2021) Tie bar less machine Hfjdpfx Afjwzzw Tetsn CC300 controll Clamping force: 80 t Screw diameter: 35 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic Machine has only 2000 hours!

Condition: good (used), Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Hfedpfx Afou Rq Aijten Type: Horizontal Drive: Hydraulic Machine hours: 53000

Condition: used, Year of construction: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Hedovurhqjpfx Aftefn Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2007, clamping force: 600 kN, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Closure force: 600 kN Tiebarless Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Hfodpfx Afewurcyetsn Injection pressure: 2,400 bar

Condition: good (used), Year of construction: 2010, clamping force: 500 kN, Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hedowv Ukiopfx Aftofn Hours: 56000

Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Hfjdpsrrn U Tjfx Aften Shot weight: 26 g Injection pressure: 2350 bar Working hours: 34.748

Condition: excellent (used), Year of construction: 2012, Clamping Unit • Clamping Force: 50 Ton • Opening Force (max): 40 kN/mm • Mould Height (fixed/variable min): 200 mm • Platen Daylight (fixed/variable max): 450-550 mm • Weight of Movable Mould Half (max): 230 kg • Ejector Force/Stroke (max): 30 kN / 70 mm Injection Unit (100) • Screw Diameter: 20 mm • Effective Screw Length (L/D): 25 • Injection Volume: 31 cm³ • Shot Weight: 29 g (PS) Machine Specifications • Weight of Machine: 3,049 kg • Transport Dimensions: 2.7 m x 1.5 m x 2.2 m • Transport Weight: 3.6 tons Safety • Barrier: Optical barrier only (no mechanical barrier). Hfjdpfxevtn Nbe Aftsn 2x hydraulic core puller

Condition: good (used), Year of construction: 2001, ENGEL ES 80/25 HL-V Clamping force: 25 ton Plate dimensions: 470x280mm Controll : CC100 Year : 2001 Serial nr. 45277 Screw: 22 mm Hjdpfxsu Ed Sts Aftefn Injection volume: 38cm3 Shot weight: 34.6g/PS +Picker Engel included Weight: 1800kg

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h Hfodpfxjvl Skgs Aften

Condition: used, Year of construction: 2008, 6 units available (year 2007-2008) only as a package for sale. Arburg 320C 500-100 (2008) Clamping force: 50 t Hfjdpfx Ajvtzqrefton Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Hfsdpfx Afju Epy Netjn Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 12.500 h

Condition: used, Year of construction: 2013, 1. Clamping Force: 60 tons (600 kN) 2. Injection Unit Orientation: Vertical 3. Rotary Table: Included 4. Screw Diameter: 25 mm 5. Shot Size: Around 4.4 oz (125 g) 6. Injection Pressure: Up to 210 bar Hfsdpfxewp E Hzs Aftsn 7. Injection Speed: Approximately 139 mm/s 8. Mould Opening Stroke: 305 mm 9. Ejector Stroke: 106 mm

Condition: like new (used), Year of construction: 2019, Clamping force: 50 t Hfsdpowzmdxjfx Aftsn Screw diameter: 20 mm Type: Vertical Drive: Hydraulic

Condition: good (used), Year of construction: 2000, Clamping force: 25/35 tons Hfedpfx Afjrr H T Totjn Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 42.036