Used Window Cutter for sale (14,423)

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Codpfx Aiswdic Ascshd Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 3 St. Spindle diameter 50 mm SCM Dogma Window Production Line For sale on behalf of a customer ----- Manufacturer’s Technical Description: Item 1 Tenoning Machine Worktable height = 990 mm Carriage for longitudinal machining: - Driven by a motor with numerical control - Stroke = 750 mm - Speed = 12 m/min - Max. acceleration = 2.5 m/s² Carriage for transverse machining: - Driven by a motor with numerical control - Stroke = 1600 mm - Max. speed = 12 m/min - Max. acceleration = 2.5 m/s² Left stop for aligning the workpiece during the loading phase: - Integrated into the auxiliary support bridge Crosscut unit (1TR): - Power = 4 kW (5.5 PS) - Rotational speed = 3,000 rpm - Outer diameter of the tool = 400 mm - Diameter of the tool bore = 80 mm - Fixed horizontal positioning - Vertical positioning with pneumatic on/off mechanism - In position 1 - Power = 15 kW - Rotational speed = 3,500 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 320 mm (optional: 370 mm) - Vertical stroke = -15 to +300 mm - Maximum reach of chip guard = 55 mm - Positioning: horizontal = fixed - Positioning: vertical = motor with numerical control - In position 2 Item 2: Profiling Machine: 1. Profile Milling Unit (1VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm with bidirectional rotation - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop and time-controlled engagement - Positioning: vertical = motor with numerical control - in position 3 Work table height = 870 mm 2. Profile Milling Unit (2VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop - Positioning: vertical = motor with numerical control - in position 4 3. DUO Unit: Device for cutting out the glazing bead (in the horizontal position) and/or grooving unit (in the vertical position, RL/SF) (in position 5) It includes: > 1 glazing bead removal unit with: - Power = 3 kW - Rotational speed = 6,000 rpm - Shaft diameter = 30 mm - Shaft length = 25 mm - Tools mounted on a quill > 1 grooving unit: - Rotational speed = 9,000 rpm with belt drive - Shaft with centering diameter = 50 mm, L = 3 mm for securing the tool with 3 M8 screws spaced 120° apart Cjde Ah T U Eepfx Aicehd - Tool diameter = 146 + 2 (max. diameter = 154) Tools: - Glass retainer strip cutting saws: inner diameter = 50 mm; outer diameter = 200 mm; for mounting on the quill with 6 M6 screws spaced at 60° - Gear-cutting cutters, inner diameter = 50 mm; outer diameter = 240 mm; for mounting on the quill with 6 M6 screws at 60° All tools for the dual function are mounted on the unit simultaneously, and the function is switched by rotating the unit 90° Positioning: - Rotational = pneumatic on/off - Axial = manual - Radial = pneumatic on/off with 5-position turret stop Feeding mechanism: - Wheel diameter = 110 mm - Wheelbase = 150 mm - Feed speed = 6 m/min (fixed) - Vertical positioning = manual with mechanical dimension indicator Positioning guides Right: - Ia = manual - IIa = pneumatic on/off via ...

Condition: used, Year of construction: 2007, functionality: fully functional, Window and door component production line Manufacturer: WEINIG, Type: UC-Matic Year of manufacture: 2007 Line consisting of: Pos. 1: Infeed Unirex 2000 Transverse + longitudinal conveying system PHV R For the indirect feeding of both identical and different workpiece lengths. System consisting of a transverse conveyor and a roller conveyor - Transverse conveyor, 6 lanes - Loading area for manual filling. - Automatic buffer zone - Automatic part separation using a clamping and reversing device - Transfer to a roller conveyor - Roller conveyor, powered - Pneumatically height-adjustable Adjustment travel, max.: 25 mm Transport length: 2300 mm Roller width: 160 mm Roller diameter: 50 mm Roller spacing, graduated: 120-825 mm Transport speed, fixed: 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 2: Conveyor belts Conveyor belt, powered (TB 250) With center guide Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 3: Machining center Weinig Unirex 2000 Pos. 4: Transport between machines with double part formation Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor – infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Transverse conveyor, 7 lanes, height-adjustable Turning device WVU in the transverse conveyor, including options For changing the end face of workpieces. Rotational movement motorized 180° around the vertical axis. Pneumatic height adjustment of the turning device up to the max. wood height (100 mm) 4 x Additional automatic buffer zone (max. 8 zones) Pos. 5: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Pos. 6: Transverse machining Weinig Unitec 15 1. Tenon and groove spindle 2. Tenon and groove spindle Pos. 7: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 8: Longitudinal machining Weinig Univar 12 1. Profiling spindle 2. Profiling spindle Profiling cutter head, horizontal, top 3. Profiling spindle Profiling cutter head, vertical, right Profiling cutter head, vertical, top (in the auxiliary stand) Profiling cutter head, horizontal, bottom (in the auxiliary stand) Pos. 9: Turning system with clamping device Pos. 10: Outfeed of the line Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor - infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Roller width: 230 mm - Roller diameter: 50 mm - Roller spacing, graduated: 120 - 825 mm - Transport speed, fixed: 20 m/min. - Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz - Stop height: 30 mm - Transverse conveyor, 7 lanes, height-adjustable - Adjustment travel: 25 mm - Conveying and stacking length: 3000 mm - Support width: 2000 mm - Working height, adjustable: 820-1050 mm Codpfo Agvhpjx Aicjhd - Conveying speed, fixed: 10 m/min. - Moto

Condition: good (used), Window rubber, cutting machine, seal cutter Chedpfxjb A Ncge Aicjd -Hitches: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Chedpfey Hl Iyex Aiced Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), functionality: fully functional, Fatosa Frozen Meat Slicer, Frozen Blok Cutter Cjdpfxszmp Rps Aicshd Sold on behalf of a customer – functioning machine, sold as is, without warranty, no returns.

Condition: used, Festo ZA 2T tenon cutter for the precise milling and sawing of tenon joints in solid timber, as well as for the manufacture of windows and doors. The machine enables perfectly fitting timber joints thanks to precise depth and length adjustment with high repeatability. Ideal for window and door construction as well as for traditional timber joints in furniture making, including a set of Gold IV68 milling tools. Cjdpfx Aszryqwjicehd Technical data: - Cutter diameter: max. approx. 340 mm - Cutting height: approx. 80 mm - Travel distance: approx. 1,300 mm - Further technical data: On request

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. Chjdszcyrwspfx Aiced The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. Chedpfx As Aazymeicsd This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us.

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation Codpfx Aoyn Dy Njicehd 3 months warranty for parts

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) Chjdpfxjzmyfdo Aicsd - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm Csdpfxju Ibuws Aicjhd -track width 2.300mm *

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: mechanical, laser type: fiber laser, laser power: 6,000 W, power: 6 kW (8.16 HP), type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration Chsdjwxar Djpfx Aicsd

Condition: new, PRICE: 5500 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Cedovtz U Rspfx Aicohd Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Chedpfsz N Sixex Aicod Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 36536, Black Model Cjdpfx Aiezcc S Hscjhd Standart Machine

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 8WT30919, HAEGER 824 WINDOW TOUCH – Hydraulic insertion press, Haeger Type 824-WT-3H Year of manufacture: 2007 Serial number: 8WT30919 including automatic feeding system and extensive tool accessories. Technical data: Maximum pressing force: 72 kN / 8 US tons Reach: approx. 610 mm Ram stroke: up to approx. 203 mm Operating voltage: 380 V according to nameplate Frequency: 50/60 Hz Current consumption: 9.6 A Power supply: 3 phases Drive: Hydraulic Control: Window Touch with touchscreen Equipment and accessories: Haeger Modular Autofeed System (automatic feeding system) Hydraulic insertion unit Touchscreen control panel Various pressing mandrels and dies Chedpfx Aj Ahv Sleicjd Different insertion tools Additional machine accessories, stored in a Euro pallet box Possible applications: The machine is suitable for inserting threaded nuts, threaded bolts, spacer bushings and other insertion elements into sheet metal parts. Typical application areas include industrial sheet metal processing, mechanical engineering, control cabinet construction and metalworking. Machine condition: The machine is used and fully functional. An automatic feeding system is available. Its functionality needs to be confirmed separately. The machine shows signs of wear and tear due to age and use. Includes existing tool accessories and additional accessories in a Euro pallet box. Inspection possible by appointment. Sale from the location. Dismantling, loading and transport by agreement.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.” Chjdsxw Ux Hspfx Aicod

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: Chsdpfj Ahkkhjx Aicjd ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Codpfx Aiszvnnfscehd Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Cedox Syvcepfx Aicshd

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Cedpfx Aijxwtu Tocshd Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Cjdpslmnzqefx Aicjhd

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 3,200 mm, spindle diameter: 60 mm, spindle speed (max.): 6,000 rpm, power of the milling unit: 7,500 W, rotational speed (max.): 6,000 rpm, total height: 600 mm, space requirement width: 8,000 mm, space requirement length: 7,000 mm, overall weight: 15,500 kg, milling spindle length: 600 mm, saw blade diameter: 400 mm, power: 70 kW (95.17 HP), input voltage: 380 V, height adjustment type: electric, power of feed motor: 7,700 W, working height: 120 mm, working width: 160 mm, high-performance window production machine, with 2 tappers and two right and one left profiling shaft, produces direct windows in thicknesses of 68-88-130 mm. Delivery by appointment Chjdetp Dngepfx Aiced

Condition: like new (used), Year of construction: 2010, functionality: fully functional, overall weight: 4,795 kg, SCM WINDOR 20 corner processing center for machining wooden frames (windows and patio doors). It performs mortising, profiling, and hardware/glazing bead machining in a single pass, with automatic workpiece return, allowing a single operator to handle the entire process. Complete with a toolset for 68mm windows. Chodpfxs Afwtve Aicsd