Used Window Cutter for sale (12,108)

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Csdpfx Aey Uyb Relbjgu Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Cgodpfezavqwox Albeu Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, input frequency: 50 Hz, type of input current: three-phase, Bread Crumb Crusher Bio 2 for all types of light/dark bread crusts, etc. "the Bio universal crusher" Capacity: 600 kg dry/hour robust technology Connection: 400V, 16A-CEE plug Dimensions: 720 x 690 x 1580 mm, W x D x H Used machine & SAB inspected with warranty + spare parts service Quality from a specialist company! Codpfoygdagox Albsgu Benefit from over 35 years of experience! Options: additional sieve service package maintenance contract delivery service instruction & commissioning Visit our large showroom!

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Power [kW]: 37.0 Codpfx Alswnidhsbogu - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture: 2021 (Tabletop machine) For stationary profile milling of head edges on soft-forming and post-forming workpieces. Also for flush milling on thick PVC edges for right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual profile depth adjustment. The motor feed is done manually by sensing the workpiece. Standard equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, continuously adjustable up to 27,000 rpm, standardly equipped with a radius cutter, R=2. Sensing is done by a start-up ring on the workpiece. - Aggregate feed on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Cgjdpokwhapsfx Albeu Availability: short-term Location: Solingen

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, overall weight: 195 kg, total length: 655 mm, total width: 720 mm, total height: 1,400 mm, ejection height: 470 mm, Bread crumb crusher Ismar Junior 4 for all types of light/dark bread crumbs, etc. "the universal crusher" Ismar model: Junior 4 Bread crumb crusher simple, robust technology tested according to DGUV V3 standard, exclusively available from us Connection: 400V, 16A-CEE plug Dimensions: 850 x 950 x 1485 mm (W x D x H) Used equipment, cleaned Cgjdpjyakh Rsfx Albju We have many other bakery machines in stock!

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm Csdpfeyq Sztsx Albjgu - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----... Codpfoxtvgksx Albjgu

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum Cgsdpfx Alozawizjbeu IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, 6 knives emptier DC 6 motor 130 A dimensions (l x w x h) : ± 2.000 x 1.900 x 2.400 mm Cgsdpfx Aloy Ur Dkjbeu

Condition: excellent (used), Year of construction: 2000, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumrik 840D, table length: 6,500 mm, power: 2.2 kW (2.99 HP), overall weight: 7,500 kg, total length: 14,000 mm, total width: 3,000 mm, total height: 2,000 mm, Laser cutter ADIGE - LT652 MACH-ID 9637 Make: ADIGE Type: LT652 Control: Siemens Sinumrik 840D Year: 2000 Cgedpfx Aljy U If Rebju in feed 6500 mm length Max profile 140 x 140 mm Rofin resonator 2200 W Under power inspection posible ! Working area X Axis:6500mm Power resonator: 2.2kW / Amp Length: 14000mm Width: 3000mm Height: 2000mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Type: ByLaser 4400 Csdpjy U Httefx Albogu Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Working area X Axis: 3048mm Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, input frequency: 50 Hz, type of input current: three-phase, Universal Mixer – Fortschritt Cgsdpfxeyunk Ej Albju Universal machine Mixer, Type 15 Bowl capacity approximately 15 liters With 180° tilting function DGUV V3 certified – available only from us Connection: 400V, 16A CEE plug Used machine We have other machines in stock!

Condition: good (used), Code: 0398 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Cgsdpszblzbjfx Albsu Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register adjustable by handwheel Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 2036, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, overall weight: 600 kg, rotational speed (min.): 2,000 rpm, rotational speed (max.): 10,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Machine number: 2036 - Operating voltage: 400 V Cedpfjwxrf Nox Albsgu - Frequency: 50–60 Hz - Rated current: 10 A - Connection: 2 kW - Grinding wheel diameter: max. 125 mm - Speed: 2,000–10,000 rpm - Table dimensions: 500 x 200 mm WORKING AREA & CAPACITY: - Indexing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Workpiece diameter between centers: 338 mm - Workpiece diameter, overhung: 600 mm - Distance between centers: 950 mm - Internal taper, indexing spindle: Morse 4 / Unified 40 - T-slots, machine base: 12 mm - T-slots, additional elements: 8 mm TRAVEL DISTANCES & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel, tool holder: 100 mm - Vertical adjustment, grinding head: 325 mm - Axial adjustment, grinding spindle: 5 mm - Tool holder: 230 mm - Grinding head mounting: 800 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting: 360° - Grinding heads: 360° - Tool holder: 360° - Universal device (horizontal/vertical): 360° OTHER FEATURES: - Spiral grinding/slotting lead: 0.80 mm - Maximum spiral sharpening length: 190 mm DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speeds: 4,000 / 8,000 rpm (pole switching) - Stepless DC: 2,000–10,000 rpm - Grinding wheel diameter: max. 125 mm - Cutter wheel diameter: max. 200 mm ACCESSORIES: - Includes two-axis digital readout - Extensive machine accessories included

Condition: good (used), Year of construction: 1980, machine/vehicle number: 4038, travel distance X-axis: 290 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 330 mm, mount diameter: 40 mm, table length: 600 mm, table width: 210 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 700 kg, CONDITION & NOTES: - This is an active, path-controlled tool milling machine Cedowxpxmopfx Albegu

Condition: used, Year of construction: 1999, machine/vehicle number: 99268-1, Product number: 2144 Type: K120U Serial number: 99268-1 Year of construction: 1999 Bowl: 120 liter Speeds: 2 on knife, 2 on bowl, 2 mixing speeds Power: 3 x 400V, 50Hz, 97A Dimensions: 2050 x 1250 x 1250 mm Cgjdpfein Ufhox Albju Weight: 1385 kg With DGA33 control indicator With unloader

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm Cjdpfx Aleb A Hv Debegu -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition Cedpfx Aoyxy S Rolbjgu

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm Cedpfx Ajv Ag Tdolbogu 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: used, Quantity: 1 Blades: Z8 + 8 Cedjlf I E Uepfx Albogu 220 x 25 x 70 mm

Condition: used, - 220 x 12 x 70 mm, - Z8 + 8, - Quantity: 3, Cedpfx Alolf I E Hjbogu Price per piece: €50.00 + VAT.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Well-maintained condition Equipment and technical data: with 3 tool positions Swiveling table for the production of studio windows and segments for curved arches Precise angle display via rotary encoder with 1/10 degree resolution The automatic splinter guard remains in the tool cutting plane at every angle setting Automatic length compensation via special guide rail and compensation stop Quick-release mechanism at 90-degree position Automatic splinter guard change over the entire swivel range of +/- 65 degrees Crosscut saw: Spindle arrangement at the top Three-phase drive, 3 kW Spindle diameter 30 mm Speed 2800 rpm Protective and extraction hood with extraction port 100 mm Slotting spindle: Power 7.5 kW Speed 4000 rpm Cgsdpfxszalmzs Albou Usable length Tool diameter 400 mm 2 x 100 mm stroke for 3 tool positions Protective and extraction hood with extraction port 180 mm Automatic brake with speed monitoring Weight 850 kg Dimensions 2250 x 1880 x 1800 mm Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- Cgsdpfxeyyqm Ie Albeu crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: used, Year of construction: 2000, Storage location: Nattheim Codpfsvwdmwex Albsgu