Power unit, pneumo-hydraulic cylinder, hydro-pneumatic press, pneumatic press, compressed air press,

TOX S04.00.050.12D

Condition: like new (used), Year of construction: 2014, operating hours: 9,000 h, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,404 kg, input voltage: 400 V, total width: 2,950 mm, total length: 922 mm, total height: 2,000 mm, empty load weight: 1,404 kg, (offer: price already reduced by 20%) used water chiller, second-hand completely revised. - brand: Carrier. 162 kw water-water system (139320 frigories). model: 30RW-160-A0178-PE-.gas R407C. 4 scroll compressors and 2 water pumps. 2 plate exchangers. Consumption 63 KW. Equipment reviewed and with its factory gas reference: 1060 Only 9000 hours of compressor use. Fpsdpfx Aovpg Arom Esp

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Fjdpfxew H Auqs Am Espp

Year of construction: 2016, condition: ready for operation (used), Max. pressing force: 80kN, stroke: 180mm, power stroke: 12mm, weight: 760kg. Fpjdpfx Aeifptyjm Esp

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Final compression pressure: 10 bar, motor power: 110 kW. Includes refrigerant dryer. Fodpeh Hi Injfx Am Espp Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Documentation available.

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Fedpfx Amsdq E Eie Eopp Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Press Typ: EPMR 055.034.100.000 including Schematic diagramm You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included

Condition: ready for operation (used), Year of construction: 1983, Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible. Fpsdjw U T Txepfx Am Eep

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg Fedpfx Aozfh Hyem Eopp

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force Fodpjv Snixjfx Am Eepp – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg Fpedsvz S Siepfx Am Ejp

Condition: used, Year of construction: 2012, swing diameter 210 mm x-travel 400 mm z-travel 200 mm control FANUC - 32i A weight of the machine ca. ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. Fpjdpfx Aozmiwvom Eop We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3