Hydraulic press

WMW Zeulenroda PYE 250 SS

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Isdpfxet Hw Iie Abgeia total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Iijdpfx Abevuun Togea Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm Iijdpjvut Ncjfx Abgea table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm Iiodpfxedlcy He Abgoa no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), Iiedpfxev Rwu Uo Abgja two-hand operation

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Ram plate thickness 100mm Table plate 1250 x 700mm Table plate thickness 180mm Ijdpfx Abowir U Eegeia Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Iisdoqy E I Ropfx Abgea

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes Iiodpowzybkofx Abgoa The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Ijdpfx Aeyxgr Robgeia

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Cantilevered rotating device with brake for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control right/left switchable with clamping frame for elevation of approx. 1000 mm Machine is technically in new condition, almost unused Ijdpohwv R Dofx Abgsia Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacities from 500 kg to 5000 kg