Used Eht Tss 6-60 for sale (53)

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm EQUIPMENT Fpedpfx Afel N Ufyensc motorized backgauge 1 side stop sheet holding-up system

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm Fpedpswzvntjfx Afnjc cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: DELEM DA-69 TW, bending force (max.): 300 t, working width: 6,050 mm, overall weight: 33,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, - Press brake EHT / Trumpf 6050mm x 300t - Immediately ready for operation, well-maintained condition Fodpfjx Rvrdsx Afnspc - CNC-controlled axes Y1 / Y2 / X / R / Z1 / Z2 / crowning - Extensive tool set - From facility closure, available for inspection under power - Matching guillotine shear 6050 x 6mm from EHT / Trumpf also available

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück Fpodpfsww Nccsx Afnoc back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control - Ready for demonstration under power - Weight approx. 24 t Fsdpfxex Sau Eo Afnspc

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Fsdpfx Afowrhwujnopc

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot Fpsdpfx Afsxab Tvonsc - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo Fpsdpfxeww E Nxe Afnec MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Fpedpfjx Da D Uex Afnjc Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Fpedpfx Ajx U Dw Nsfnoc

Condition: good (used), Year of construction: 1995, Technical specifications: Maximum cutting width: 6500 mm Maximum cutting capacity (steel St40): 6 mm Maximum cutting capacity (stainless steel): 4 mm Adjustable cutting gap Adjustable cutting angle Adjustable parallel stop Oil capacity: 220 l Motor power: 18 kW Dimensions (L x W x H): approx. 8300 x 2200 x 2450 mm Fpedpfsyhpx Rox Afnjc Overfloor machine (i.e. no additional foundation required) Weight: approx. 21 tons The seller is not liable for typing or data transmission errors. The machine's visual condition, technical state, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Fpedpfoyhmc Tex Afnsc Control unit: Cybelec DNC 800 Total power requirement: 15 kW Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Side safety doors Punch tools Segmented V-dies

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, stroke length: 240 mm, throat depth: 300 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Fpedpeygw Ahsfx Afnjc Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Control system brand: Unimec - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Crowning system: None Fpjdpfx Afjybdknsnjc - Punch holder: Standard - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Fpedpfxjtva Dno Afnsc

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. • Cutting capacity: • Cutting length: 3,050 mm Fodpeycfq Ssfx Afnepc • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² • Hydraulic system: • Oil volume: 300 liters • Electrical data: • Current type: AC • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 Fpjdpoul S Eaofx Afnsc CNC Control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 index stations size D 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling 9226ä

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN Fpodpfjq Awh Rex Afnjc tracking travel 13 mm safety distance 176 mm

Condition: ready for operation (used), Press force: 250 t greatest working length: 4050 mm Fpedpsx Tr Ugjfx Afnjc equipped with CYBELEC DNC 70 PSG control

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft Fpodpfx Asgxnkkefnsc -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg Fpsdpfxegxnkve Afnjc

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm Fodpfogxnkcox Afnopc -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Condition: used, Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) Fpjdexaa A Nepfx Afnoc - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation Fpsdpfxjxab Ugj Afnoc

Condition: used, Year of construction: 1996, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm column arm 300 mm ajustment speed 140 mm/sec work speed 10.0 mm/sec return speed 130 mm/sec Fpsdpfx Afsxab Exenjc work stroke 360 mm dayligth 340 - 700 mm table height 1000 mm table width 200 mm oil volume 300 ltr. operating pressure max. 295 bar air pressure 4.5 - 6.0 bar voltage 3x 400 Volt total power requirement 15.0 - 27.0 kW weight 17200 kg range L-W-H 5850 x 2550 x 3200 mm good condition (!!) including new CNC control - in checked condition - machine video - ?v=Owh6BjvZ4RM Equipment: - electro-hydraulic CNC press brake - with new CYBELEC "VisiTouch 19" touch CNC control (conversion) * graphic numerical 2D control * 19? modern, streamlined touchscreen with glass surface * can also be operated with gloves * clear, well-arranged menus in the operator's language * easy operation thanks to the user-friendly HMI * large tool and product library - CNC controlled axes: * Y1+Y2 / X+X1 / R / Z1+Z2 / BV1+BV2 / I + CNC crowning - CNC electro-motoric back stop adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 500 mm/sec. * Adjustment in X1 axis possible .. +/- 125 mm - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 85 - 235 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC-controlled / pneumatic die displacement (I axis) - 2x CNC-controlled front bending aids (BV axes) * Swivel angle max. .. 45 degrees * Swivel speed .. max. 45 degrees/sec. - CNC-controlled electric table crowning - pneumatic EHT upper tool clamp - pneumatic EHT lower tool clamp - 1x freely movable 2-hand/foot control - rear protective device (protective grille) - side protective device (swivel doors) - various bending tools - original operating instructions + circuit diagram etc.