Sheet Metal Shear

EHT TSS 4-31

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts Dkodpfxjxab Tvo Ap Iju - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Dkedpfsxq Eyujx Ap Ieu

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Dodpfxsvzn Ito Ap Ijku Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm Dkjdpfx Aeuagxpop Iju cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload Dksdpfx Ajtycdkep Iju - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Dkedpfx Apjxg Rhvo Ieu

Condition: used, Year of construction: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm table surface area 940 x 510 mm spindle taper SK 40 spindle turning speed range 32 - 1600 U/min Dkedpfx Aovzhh Top Isu feed - longitudinal/cross 8 - 400 mm/min feeds vertical 4 - 200 mm/min total power requirement 4,5 kW dimensions of machine L x W x H 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant

Condition: as good as new (ex-display), Year of construction: 2023, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Exhibition machine from 2023 only 2x machines in stock special price on request Features: - robust, manual folding machine - split upper, lower and rear tool * Height of upper tool = 100 mm * Pitch 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Upper tool with quick-change system - Quick foot clamping Djdsxaa T Ujpfx Ap Isku - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) - Accessory box - rear * Pictures show identical machine (UFA 1212)

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Dkodpfsu Icmhox Ap Iju Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Dsdpfx Apjpag R Rj Isku Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT