Used Eht Ehps 11-35 for sale (53)

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included Dwsdpfxjz E U Dpj Ap Ijc • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Dodjzkvk Djpfx Ap Iowc

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Dwodpfstqmvzox Ap Isc Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm Djdpfx Aps Dqaqs Ijwc clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m Djdpfsd Ih S Usx Ap Ijwc sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 Dwsdpjy D Sy Rofx Ap Iec - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Djdpfx Aoybdknjp Iewc Lukas van Rossum

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Dwedpfx Ajzrn H Hjp Isc

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms Dwjdpfxozt R D Do Ap Ioc -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, Dwedpfx Aoy Saursp Iec CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Dwedpfx Apjgz S S Ss Ioc Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Accessories/Equipment: - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity Dsdsy H Ilbjpfx Ap Iswc – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Dedpfozd S Thjx Ap Iewc Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S dayligth 570 (EHT) mm total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm Dedpfxjy D T S Io Ap Iewc - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders Dodegxnkcjpfx Ap Ijwc -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Dwsdpfx Aox Ik D Ajp Ijc * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft Dwodpfsgxnkkjx Ap Iec -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Dwodpsyw Rbyofx Ap Iec Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm Djdpfx Asb N Evmep Iswc support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping Dwjdpfxob Rk Ekj Ap Ioc - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Condition: excellent (used), Year of construction: 2014, Technical data: Working length: 8050 mm Press force: 300 tons NC control: DELEM with Cybtouch 15 Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance between table and punch: 500 mm Overhang: 300 mm Table height: 875 mm Motor power: 26 kW CE marking In-floor machine Weight: approx. 45.5 tons Accessories: Various tools 6 support arms Djdpfjz Abn Sex Ap Iowc Laser monitoring Condition: Overall, very good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 Dwodpfsgxnkvjx Ap Iec -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, overall weight: 13,000 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: EHT, Type: ECOPRESS 175t x 3050mm Year of manufacture: 2001 Technical data Manufacturer: EHT Type: ECOPRESS 175-30 Year of manufacture: 2001 Working length: 3050 mm Capacity: 175 t Distance between uprights: 2550 mm Upright overhang: 400 mm Ram stroke: 240 mm Distance between table and ram: min. 370 mm / max. 610 mm Drive power of the main motor: 15 kW Dedpfx Ajz Iy U Ejp Iowc Dimensions: approx. L 5000 x W 2400 x H 2950 mm Weight: 13 t Equipment • CYBELEC – DNC 1200 2D graphic control • Pneumatic die shifting • Controlled axes: Y1, Y2, X, R • 4 back gauges, pneumatically clamping • CNC-controlled WILA crowning system • Pneumatic upper tool clamping • Adjustable support arms • Operating manual Tool package: Upper tool, bent, 3050 mm, split, H 200 mm Upper tool, slightly bent, 3020 mm, split, H 220 mm Upper tool, straight with clamping edge, 3050 mm, split, H 220 mm Die block 3050 mm, split: V 16, V24, V12, V8, all 30° + clamping groove, H 110 mm Die V50, 2965 mm, split All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Cannot be tested. Collection only. Dwsdpfxjzqux Ts Ap Iec

Condition: used, Year of construction: 2016, machine/vehicle number: 24398, functionality: unexamined, controller manufacturer: Cybelec, controller model: Modeva Pac 15, control type: CNC control, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Dwodpfx Apjx Dh U Ij Ijc