Used Eht Ehs 6-50 for sale (57)

Condition: used, Year of construction: 1985, machine/vehicle number: 101018, Lg.no. 24242 Technical data: - max. cutting width 3050 mm - max. cutting capacity at 45 Kp/mm² 6 mm - Cutting angle adjustment 1 - 2.20 ° - Cutting gap - adjustment via lateral adjustment lever - Number of hold-down devices 16 pcs - Stroke rate up to 22 /min - Front angle stop 1100 mm - 2 front support arms 600 mm Fsdpfstqmzcox Agrjpb - mot. Back gauge with ELGO positioning control - 5 - 1000 mm - cutting line lighting - E - foot switch - Drive 400 V / 12 kW - Space requirement approx. W 4100 x H 1500 x D 2200 mm - Weight approx. 5.0 t

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: DELEM DA-69 TW, bending force (max.): 300 t, working width: 6,050 mm, overall weight: 33,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, - Press brake EHT / Trumpf 6050mm x 300t Fsdpfxex Rvrdj Agrspb - Immediately ready for operation, well-maintained condition - CNC-controlled axes Y1 / Y2 / X / R / Z1 / Z2 / crowning - Extensive tool set - From facility closure, available for inspection under power - Matching guillotine shear 6050 x 6mm from EHT / Trumpf also available

Condition: excellent (used), Year of construction: 2001, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Equipment: finger protection, Hydraulic guillotine shear Manufacturer EHT Type. TSS 6-30 Year of manufacture 2001 Technical data Make: EHT Type: TSS 6 - 30 Year of manufacture: 2001 Usable length: 3050 mm Sheet thickness: 6 mm Fsdpfx Aovkd Etsgrjpb Motor: 11 kW Oil quantity 250 L Dimensions: L 3.70 x W 2.15 (plus stop arms 1m, plus grid 0.6m) x H 2.15 m Weight: approx. 8 t Equipment • Angle stop • 3 support arms • Controlled rear stop 10-1000mm • Control Elgo P8721 • Pneumatic holding device with scrap chute • Cutting edge lighting • Rear area protection via light barrier • Cutting length adjustment All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm Fpjdpfx Agol N Ufyorjb machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, of which 4 are D-size index stations 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling Fjdpfx Ageul S Eaeropb 161225ä

Condition: ready for operation (used), Year of construction: 1964, working width: 3,050 mm, sheet thickness (max.): 10 mm, total length: 4,250 mm, total width: 2,800 mm, total height: 1,800 mm, Working width: 3050 mm Sheet thickness: 10 mm Equipped with infeed table 2500x2000 mm Fpedpfxjxrculs Agreb

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Fjdpfx Asr Epr Uogrjpb Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Fpjdpfjb N Evmex Agrob working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm Fjdpsgxnkcsfx Agrepb -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 Fpjdotqmvzjpfx Agrsb - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg Fedpfx Asgxnkvsgrepb

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Furnishing: - DELEM CNC control DA65 - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA Fpjdsx Sr Dlopfx Agreb - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” - side + back protection device - Hand and foot controls - Operation manual ?

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm Fsdpjx Sau Eofx Agrjpb - Pneumatic sheet support lift - Backgauge with positioning control - Ready for demonstration under power - Weight approx. 24 t

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc. Fjdpfx Aegxnkkegrspb

Year of construction: 2005, condition: excellent (used), Very good, hardly used Fedpfx Agoxbft Norspb

Condition: excellent (used), EHT Guillotine Shears Brand: Eisen u. Hammerwerk (EHT) Type: ASS 8-30 Fedpfjwc Rgaex Agrspb Year of manufacture: 1967 Serial number: 10625 Cutting length: 3000 mm Max. sheet thickness: 8 mm Motor power: 11 kW Connection: 380 V Dimensions: 3950 x 3100 x 1900 mm

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 Fsdpfxeq Awh Rs Agrspb working length 2550 mm output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm Fsdpfx Agex Ik D Aerjpb work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Fjdoxxqtcspfx Agrepb Drive power: 15 kW Weight: 9,500 kg

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch Fpodpfsx Emqysx Agrjb - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, controller model: CYBELEC DNC 1200 PS Eco, bending force (max.): 225 t, stroke length: 550 mm, distance between stands: 1,550 mm, working length: 2,050 mm, TECHNICAL DETAILS Fpodexxqm Nopfx Agrjb Press force: 225 t Bending length: 2,050 mm Upright distance: 1,550 mm Stroke: 550 mm Table height: 700 mm Throat depth: 405 mm Distance table/ram: 320-870 mm Frame throat: 405 mm MACHINE DETAILS Control: CYBELEC DNC 1200 PS Eco Machine weight: approx. 14,000 kg EQUIPMENT Controlled axes: Y1 - Y2 - X - R Z1 and Z2 manually adjustable Lasersafe angle measurement Pneumatically adjustable support table Pneumatic upper and lower tool clamping 2-hand-foot control Manual crowning

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm Fpjdpfoxab Ugox Agrsb * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Fpodpfx Agjxwnv Eorsb Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm Fpedpetv Rh Aefx Agrjb distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front - Side + rear protective device - Operating instructions

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, oil tank capacity: 400 l, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Fodoxwnqcjpfx Agrjpb