pressure:600 t
distance between columns:3640 mm
stroke:350 mm
no. of strokes:11 - 44 /min
Distance table/ram, max. stroke up, adjustment up:1550 mm
table surface area:3600 x 2500 mm
sliding table:3600 x 2500 mm
ram surface:3600 x 2500 mm
Side window:2200 mm
ram adjustment:400 mm
material width coil line:500 - 1950 mm
Material thickness at 1200 mm material width:0,6 - 2,5 mm
Material thickness at 1850 mm material width:0,6 - 2,0 mm
Material thickness at 1950 mm material width:0,6 - 1,75 mm
Coil w...
pressure: 160 t
slide stroke: 250 mm
number of strokes - idle run: Einzelhub 13 Hub/min
adjustment of stroke: nein / no
throat: 500 mm
table surface area: 2000x950 mm
ram adjustment: 100 mm
ram surface area: 1400x800 mm
height over floor: 800 mm
distance between columns: 1460 mm
dayligth: 600 mm
manual operated: ja / yes
total power requirement: ca. 32 kW
weight of the machine ca.: 21,5 t
dimensions of machine: 2,7x2,5x4,2 m
dimensions electric cabinet LxWxH: 2,0x0,64x2,01 m
Press is tested with...
Crank press HECKERT PKZ 400.1 built in 1980.
Technical data :
- maximum pressing force: 400 t
- working path - lower position of the slider to the maximum pressing force: 21 mm
- maximum drawing depth: 125 mm
- pressing force using the maximum drawing depth: 160 Mp
- idle speed of the slider: 18 min-1
- maximum number of switchings: 9 min-1
- ram stroke (min-max): 315 mm
N8h8bwzl
- slider adjustment: 200 mm
- holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2
- force of the ...
The machine is in good technical condition, by prior arrangement the possibility of testing. GO electrical installation 2014, 2018 - replacement of inserted wheel and pinion Dimensions of the machine (from 0 l, W, H) - 5320 mm x 2530 mm x 9000 mm Weight of the machine - about 210 t Functionality of the machine - machine function OK (except cushion - not working, not connected).
Cmqehouw
Catalog No. : 5335
Gxfulk
Type: PKZZ 1000
Producer: VEB ERFURT
Made in: 1962, GO 1999
Characteristic:
Pressing force: 1 t
Length of the table: 4000 mm
Width of the table: 2100 mm
Distance between frames: 4000 mm
Door size: 4700x4000 mm
Ram stroke: 500 mm
Adjusting the ram: 180 mm
Power input: 75 kW
Machine weight: 145 t
2019: new motor and resistors
Press SMERAL LDO 315
Producer SMERAL
Type: mechanical trimming press
Build year: 1981
Capacity: 3150 kN (315 tons)
Ram Stroke; 200 mm
Max. distance – ram to table ; 900 mm
Biiutsfa2d
Table dim. 1380 x 950 mm.
Ram surface dim; 1250 x 900 mm
Press weight; 27 350 kg
Press dimensions: 2300 mm x 2350 mm x (Height)4900 mm.
Press intended for sale together with other assets due to the termination of the company's business.
Price not include disassembly and transport
pressure:500 t
distance between columns:3400 mm
stroke:850 mm
Y9lnnye0j
no. of strokes:9 - 18 /min
distance table/ram, max. stroke up, adjustment up:2050 mm
table surface area:3100 x 1900 mm
table height over floor:400 mm
side window:1550 mm
ram surface:3100 x 1900 mm
ram adjustment:350 mm
pressure of drawing cushion in ram:70 t
pressure of drawing cushion in table:140 t
stroke of drawing cushion in table:0 - 250 mm
stroke of drawing cushion in ram:150 mm
height beneath floor:6,0 m
height over f...
Type: LDC 160
Manufacturer: Šmeral
Bgy07rpd0k
Year of production: 1989
Climatic design: N
Nominal force: 1570 kN
Max. number of strokes: 45 / min
Individual strokes: 25 / min
Ram stroke: 160 mm
Ram adjustment: 100 mm
Weight: 17 500 kg
Grip: 500 mm
Passage: 1600 mm
Table clamping surface: 2000x780 mm
Ram clamping area: 1550x630 mm
Ram adjustment: 100 mm
Total installed power: 17.5 kW
Machine dimensions h * w * d: 3,6 * 2,4 * 2,3
Crank press ZAMECH PKRR 400A built in 1974.
Technical data :
- pressure: 400 tons
Cjqybyuw
- clearance between stands: 1020 mm
- ram stroke: 315 mm
- number of strokes per minute: 20
- maximum distance of the slider from the table closed: 742.5 mm
- slider adjustment: 250 mm
- table dimensions: 1020 x 1050 mm
- main engine power: 40 kW
- main engine revolutions: 1500 1 / min.
- weight of the press: 40 t
CLEARING - F-4250-96- strokes per minute 30- stroke lenght 254 mm- stroke adjustability 250 mm- 250 t- table 2470x1750 mm- table thickness 200 mm- table height above floor 1010 mm- slide 2275x1700 mm- max tool height 700 mm- shut height 450 mm- distance between columns 2270 mm (front window width)- side window width 820 mm- side window height 600 mm- main motor 22 kW- uncoiler 10036-H, coil outer diemeter 1350 mm, coil inside diameters 470-530 mm- MECON M-82-30 straightener 0,6-3 mm, strip width...
4 presses available
Capacity: 800 to
Stroke. 600 mm
Numer of Strokes per minute: 14-20
2stzu3
Size of table: 2000 mm x 1600 mm
Height of table over floor: 550 mm
Power Supply: 550 V, three-phase, 50 Hz, 130 kW
Weight: 147 to
This is a mechanical crank press made in Derby, England.
Capacity is 96 tons.
Btans3ssqi
It has a long-stroke (19” – 480mm), and plenty of ‘daylight’ in the work area. The square hole in the base allows excellent flexibility of tooling and types of work.
The clutch is pneumatic, and can be disengaged at any time throughout the stroke, with the brake stopping the press in short order.
Stands 4.7m high with the motor on, and 4m without the motor. Estimated weight 7 tons.
This machine came to Auc...
Pressure:250 t
distance between columns:1650 mm
stroke:fix 150 mm
no. of strokes:30 - 75 /min
distance table/ram, max. stroke up, adjustment up:665 mm
distance (without tool changing system on ram):765 mm
Distance between guideways:1400 mm
table surface area:1600 x 900 mm
Hole in the table:1000 x 300 mm
table height over floor:980 mm
side window:550 mm
ram surface:1400 x 900 mm
ram adjustment:100 mm
Material width of feeder:500 mm
Material thickness feeder:0,5 - 2,8 mm
material cross-cut:1200 mm...
Press, Spiertz Type F2E-32-22
Punching force 320 T
Bpqhevoomx
Strokes/minute 17-29
slide stroke 400 mm
slide adjustment 325 mm
Feed rate
Feed height from table 280 - 430 mm
coil width 800 mm
Coil weight 1400 kg
Sheet thickness 4 mm
The tools are aligned on the table with centering pins and fixed with screws. The tools are fixed to the slide with screws.
The press works with progressive dies.
Crank press KB 9534 Russian, built in 1986.
Technical data :
- pressing force: 250 t
Bpxk3hosm3
BLISS - 4FE-315-108W- strokes per minute not given- stroke lenght 400 mm- stroke adjustability 120 mm- 315 t- blank holder (2 bottom cylinders)- table 2750x1520 mm- table thickness 150 mm- table height above floor 1090 mm- slide 2600x1340 mm- max tool height 720 mm- shut height 607 mm- distance between columns 2500 mm (front window width)- main motor 37 kW- 2 pcs MECON GM7 M-82-24-7 feeder- light fence
Cwjavx0a
modernized 2007 with SIEMENS 7
Max Capacity: 1000 tons
Bed/slide Size: 4500 x 2500m
Stroke: 864 mm
SPM: 8 15
Bosc8kkvbn
Adjustment: 356 mm
Max. daylight: 1.380 mm
Bed-Cushion: 300 tons / 0 - 305 mm
Slide-Cusion: 100 tons / 152 mm
Distance between Columns: 4.877 mm
Large Mechanical Crank Press Upsetter available.
This press is designed to forge flanges on shafts, make big bolts and other big metal components in a single 2-second cycle.
Bsgbrboyic
Capacity: 1200 tons (main vertical crank), 600 tons (side-acting clamp)
Weight: 112 tons
Manufacturer: Coventry Machine Tool Co, England (Circa 1940's)
Cast steel frame. New bronze bearings in flywheel.
Currently installed and working, but MUST find a new home as soon as possible as land has been sold for developm...
pressure:500 t
stroke:40 - 160 mm
no. of strokes:32 / 48 /min
distance between columns:1620 mm
distance table/ram, max. stroke up, adjustment up:660 mm
table surface area:1600 x 1300 mm
table height over floor:750 mm
column travel -side:400 x 430 mm
ram surface:1400 x 1200 mm
ram adjustment:120 mm
pressure of drawing cushion in table:60 t
stroke of drawing cushion in table:100 mm
drawing cushion surface in table:1300 x 810 mm
material width of feeder:1000 mm
material thickness of feeder:- 6,0 mm...
Punching force 315 T
Bpqg9jzjef
Strokes/minute 18
Manual slide stroke 400 mm
Slide adjustment 390 mm
The tools are aligned on the table with centering pins and fixed with screws. The tools are fixed to the slide with screws.
General repair in 1996 Smeral Czech republic
Rated force 5000 kN
Ekebjrp
Passage 2800 mm
Ram clamp 1000 mm
Ram stroke 500 kN
Slide adjustment 180 mm
Lower ejector force 160 kN
Lower ejector stroke 200 mm
Working surface of the ram 2530 x 1800 mm
Table working surface 2800x1800 mm
Performance hl. engine 110 kW
Press weight 98000 kg
No accessories
HAMILTON - 250 T- strokes per minute 20- stroke lenght 250 mm- stroke adjustability 190 mm- 250 t- blank holder (2 bottom cylinders)- table 2130x920 mm- table thickness 200 mm- table height above floor 850 mm- slide 2120x900 mm- max tool height 910 mm- shut height 720 mm- 2 pcs MECON GM7 M-82-24-7 feeder
N0pn7
Used for seal flanging
Min seal diameter: 40mm
Uuuq9wmt2
Max seal diameter: 180mm
Capacity: 500 t
Stroke: 400 mm
Stroke per minute: 13 - 23
Adjustment of ram: 300 mm
Distance between columns: 2,400 mm
Daylight between massive bed and ram, stroke down, adjustment up: 1,200 mm
Bed area: 2,300 x 1,800 mm
Ram area: 2,170 x 1,800 mm
Lateral opening: 1,600 x 915 mm
Distance between lower edge of lateral opening and upper edge of bed: 175 mm
Blyrgpnevs
Main engine capacity: 40 kW
Weight: 133,000 kg
Pressure:630 t
distance between columns:1600 mm
stroke:fix 250 mm
no. of strokes:20 /min
L7kkx
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1550 x 1200 mm
table height over floor:800 mm
side window:620 mm
ram surface:1360 x 1200 mm
ram adjustment:160 mm
height over floor:5,9 m
height beneath floor:0,6 m
power requirement:32,0 kW
weight:59,0 t
dimensions (WxDxH):3,0 x 2,2 x 6,5 m
clutch:pneumatisch
overload protection in ram:hydraulisch
ram adjustment:motorisch
r...
Press Fabr. Benelli
Oqstt
Punching force 800 T
Strokes/minute 12-20
Manual slide stroke 600 mm
slide adjustment 300 mm
The tools are aligned on the table with centering pins and fixed with screws. The tools are fixed to the slide with screws.
BROWN BOGGS - SC2-250-96-48- strokes per minute 45- stroke length 250 mm- stroke adjustability 250 mm- 250 t- blank holder 36 t (cylinder stroke 120 mm, 2 bottom cylinders) - table 2470x1220 mm- table thickness 165 mm- slide 2450x1220 mm- max tool height 600 mm- shut height 355 mm- distance between columns 2470 mm (front window width)- side window width 560 mm- side window height 360 mm- main motor 22 kW- weight 43 t- MECON GM7 M-82-24-7 feeder- 2x PLCs- light fence
Coqorf9
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
10 valuable tricks for buying used machines online
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
How to receive 100% of our e-mails
