Used Eht Ehps 15-50 for sale (55)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg Nodpfxjxn Srxj Ab Djwp EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Nedpfxowbuurj Ab Dowp Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t Nedob N Evmjpfx Ab Dswp space needed: 4200 x 2000 x 3000/3150 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Njdpfetqmvzox Ab Dowp Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm Nwjdsd Ih S Ujpfx Ab Dop dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: good (used), Year of construction: 2000, Punching Press Nwjdpfx Asul S Easb Dsp Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 t Turret with 46 tool stations, including 4 D-size index stations 3 programmable clamps Metal table Exclusively used in single-shift operation Including WILSON TOOL tooling

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm Nwedpfx Asxxqtcsb Dsp MACHINE DETAILS Control system: Cybelec DNC 70 Drive power: 15 kW Weight: 9,500 kg

Condition: excellent (used), functionality: fully functional, control type: CNC control, degree of automation: automatic, controller model: modeva, bending force (max.): 110 t, working width: 3,500 mm, stroke length: 500 mm, travel distance X-axis: 1,000 mm, overall weight: 14,000 kg, Equipment: lower tooling, upper tooling, fully equipped press with all possible axles Nodoxxm Suopfx Ab Djwp

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm Nwjdpfx Abo Dqaqe Dep

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: Nodeb Rk Ekepfx Ab Dewp - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, bending force (max.): 300 t, working width: 6,050 mm, - Max. pressing force 300 t - Max. working width 6050 mm - Operating hours 26,200 h - CNC control DELEM DA 69 TW - Y1 // Y2 // X // R // Z1 // Z2 // Crowning controlled - Weight approx. 33 t - Extensive tool set incl. tool cabinet included - Machine is powered on and ready for demonstration Nedpfsxc N Rbox Ab Djwp

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Nsdpstva Dnsfx Ab Dewp

Condition: good (used), Year of construction: 1990, Pressure 320 t folding length 8050 mm column width 7550 mm Control Cybelec ModEva 12S Equipment/accessories: - CNC-controlled backgauge x-direction and R-direction - motorized die shift M1 and M2 - 2 x pneumatic bending aids in front - pneumatic sheet holding unit Nodpfxshwib Te Ab Djwp - automatic die clamping at the top - motorized crowning rebuild 2009: - motorized die shift 111-112 mechanical and electrical NEW - backgauge X-R mechanical and electrical NEW - Punch clamping automatic mechanical and electrical NEW - CNC control mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main pump hydraulics NEW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Control system: DNC70 Pressing force: max. 1,100 kN Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A Nwjdswkqr Sepfx Ab Djp EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Nwodov Duu Eepfx Ab Djp Note: Machine already professionally dismantled and ready for transport

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW Nsdpfxjw Sttae Ab Djwp TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: ready for operation (used), Year of construction: 1964, working width: 3,050 mm, sheet thickness (max.): 10 mm, total length: 4,250 mm, total width: 2,800 mm, total height: 1,800 mm, Working width: 3050 mm Sheet thickness: 10 mm Equipped with infeed table 2500x2000 mm Nedpoxrculjfx Ab Djwp

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented Noder Epr Ujpfx Ab Djwp All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders Nwsdpfegxnkcsx Ab Djp -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Nwsdpfxsgxnkvo Ab Dop -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools Nodjxwnv Eepfx Ab Dewp

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm Nodpjq Awh Rsfx Ab Dswp output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: used, functionality: fully functional, Year of construction: 1981, control type: PLC-controlled, Hydraulic Guillotine Shear Manufacturer: EHS Type: 13-31 Year of manufacture: 1981 Factory No.: 18443 Technical Data: Max. shearing capacity: 13mm up to 440N/mm² Max. cutting width: 3050mm Blade length: 3100mm Free passage: 3070mm Backgauge adjustment: 10–1000mm Cutting angle adjustment: 1°–4° Corresponds to a cutting capacity of 2–13mm Max. hydraulic system pressure: 300 bar Hold-down system pressure: 80 bar Return system pressure: 130 bar Nitrogen pre-charge in hydraulic accumulator: 100 bar Oil tank capacity: 300 liters Operating voltage, three-phase: 380V 50Hz Control voltage: 220V Total connected load: 16kW Total rated current: 32A Rated current for main fuses: 50A Nodpfx Aexu D Rmjb Djwp Total weight: 7800 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, oil tank capacity: 400 l, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Nwsdoxwnqcspfx Ab Dop

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, controller model: CYBELEC DNC 1200 PS Eco, bending force (max.): 225 t, stroke length: 550 mm, distance between stands: 1,550 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 225 t Bending length: 2,050 mm Upright distance: 1,550 mm Stroke: 550 mm Table height: 700 mm Throat depth: 405 mm Distance table/ram: 320-870 mm Nedpfoxxqm Nox Ab Dewp Frame throat: 405 mm MACHINE DETAILS Control: CYBELEC DNC 1200 PS Eco Machine weight: approx. 14,000 kg EQUIPMENT Controlled axes: Y1 - Y2 - X - R Z1 and Z2 manually adjustable Lasersafe angle measurement Pneumatically adjustable support table Pneumatic upper and lower tool clamping 2-hand-foot control Manual crowning