Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
0vu3diq more
2
Motor power saw blade 9,2 kW Blade diameter 600 mm, shaft diam 35 mm Blade revolution 2800 RPM Air consumption per cycle 20 Nl Table height 900 mm Sawdust hoods 2 x diam 120 mm + 1 x diam 100 mm Operating pressure 7-8 bar CUTTING CAPACITY mm : 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard equipment Pneumatic blade feed Two-handed safety starting system Electrical equipment CE Variable blade feed speed TCT saw blade diam. 600 mm Bqmbpxzk Emergency switch Fix... more
2

Automatic crosscut saw OMEC TA 185

VIA LUIGI FUMAGALLI 24 / 26, 22066 MARIANO COMENSE, ITItaly
6817 km
good (used)
Automatic crosscut saw type OMEC TA 185 with rollers Gnp2faaw3 volt. 380/50 more
8

Double end cut off tiltable, second hand OMA T2000

San Giovanni al Natisone (Udine), ItalyItaly
7089 km
1996
good (used)
Double end cut off tiltable, brand OMA model T2000 year of construction 1996 marked CE, second hand. Bctuc8a7cu more
6

"Rip saw" RAIMANN "FLS 170 3200"

Klipphausen, GermanyGermany dealership location
6821 km
2000
used
Nbhk2 "Rip saw RAIMANN FLS 170 3200 Cutting length max mm: 3.200 Number of saw blades: 1 Saw blade projection mm: 170 Saw blade diameter mm: 550 Main motor power kW: 11 Saw lowering: Yes Adjustable feedrate: Yes Continuously variable feed: Yes Alignment laser: Yes Lamella protection: Yes Downholder: Yes Controlled stop: Yes CE-mark: Yes Weight kg: 1.570 Operating status: not connected" more
5

Band saw equipped with pneumatic resaw ACM-ITALIA BS 740 RS3

VIA LARIO 23, 22063 CANTU' - COMO, ITItaly
6812 km
reconditioned (used)
Code: 0257 Brand: ACM-ITALIA Model: BS 740 RS3 - CE Standard Band saw equipped with pneumatic resaw RA 200 CPM - CE Standard Technical data: Flywheels diameter mm 730 Motor power Hp 12,5 Max cutting height mm 450 Cutting width mm 710 Table size mm 860 x 1100 Table tilting 0/20° Mechanical system for drive blades lifting Bblxs9it2n Blade width max 80 mm Pneumatic resaw with variable speed Max cutting height mm 230 Max clearance rollers to blade mm 150 Max cl... more
1

Vertical Band Saw Wadkin Unknown

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Gu8ni33r more
1

Band resaw RHINO SAYWER 800 SINGLE

DRACHTEN, NetherlandsNetherlands
6264 km
2018
good condition (used)
Vertical Band Resaw. Heavy duty, modern resaw with impressive features : Cast iron dynamicly balanced wheels No pit required Hydraulic blade tension Inverter controlled feed system with soft entry Digital fence with motorised positioning Neu0j Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient Infeed and outfeed bed rollers Tilting fence Maximum material size (W X H): 500mm x 350mm Distance fr... more
5
A very well-preserved band saw is the economical universal machine for cutting wood. As an inclined version automatic separation. Band roller diameter 1,000 mm, sawblade width max. 120 mm, max. Wood width 200mm, max. Cutting height 250 mm, saw blade speed approx. 40m / sec., Drive power 37kW. B2ac3xp9 The machine is completely assembled ready for production and can be demonstrated on site. Dismantling and transport by buyer. Changes and errors, information and prices as well as prior sale res... more
4
Pneumatic cut-off saw for solid wood - Voltage: 3 x 380 v - CE safety standards - Standard execution: * saw support 1000 mm left and 1000 mm right * pneumatic pusher and feeder * 2 hand safety control * safety switch * brake engine * emergency stop * protection grill * motor power 10 HP * saw blade diam. 500 mm * 3 dust hoods diam. 100 mm * saw capacity 60x360 / 135x250 mm Matrix 4-6000 Optimization line and fault readout with 6000 mm table length Ddllrlv ... more


Cutting-of...
daily

New machines via email!

Stay updated!
6

"Rip saw" RESCH "K.11.97 /6.2/PS.7.5"

Klipphausen, GermanyGermany dealership location
6821 km
1997
used
"Rip saw Ndkrz RESCH K.11.97 /6.2/PS.7.5 Cutting length max mm: 5.200 Cutting length min mm: 4.400 Cutting width max mm: 650 Number of saw blades: 1 Saw blade diameter mm: 400 Main motor power kW: 5,5 Continuously variable feed: Yes Alignment laser: Yes Total connection kW: 6 Required space lxwxh: 6250x850x900 Weight kg: 700 Operating status: still in production use Condition: suitable for use" more
8
Crosscut saw to the halving of round timber for fence pickets, etc. With automatic crosscut saw. V - guide of the woods with a feed and pull-out unit. Compound miter saw with adjustable stops. Saw motor 7.5 KW saw motor 3 KW. Bcmi7rwprr more
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Hpprjlcqs more
3

Jigsaw Griesemann DKE 90S 106

Engen-Neuhausen, GermanyGermany
6680 km
good (used)
It is a used jigsaw of Griese man 1 HP, 0, 75 kw, type DKE 90S 106, 50 Hz Bcsf3ohwtt See pictures for more details. Volkertshausen is. Can be visited like. Pleased to offer. more
5
TECHNICAL DATA: Bcsvrd9cid Saw blade diameter mm: 330 more
4
Cut-off saw for solid wood Fxmxc7h - Voltage: 3 x 380 v - CE safety standards - Saw blade diameter: 550 mm, 2800 RPM - Motor power: 5,5 kW (7,5 HP) - Infeed table: 6000 mm - Defective pusher control more
4
Super thin cutting frame saw wintersteiger only 1700 hours of operation with medium stop very well preserved and included many pages and documentation Bcbgrpbvqo more
6

band resaw STENNER VHJ 105

BEVEREN-LEIE, BelgiumBelgium dealership location
6183 km
1985
ready for operation (used)
Band resaw Make : STENNER Nbdjf Model : VHJ 105 Wheel diameter : 1.100 mm (43 inch) Width of wheel : 110 mm for sawblade width 130 (5”) Main motor : 22 kW (30 HP) CAUTION ! 220 volts 3 phase ! This machine has a tilted fence Complete with a total of 17 bandsawblades off which 7 are readily stellite tipped and sharpened . more
1

Radial Arm Saw Wadkin

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
0yuh2q0 more
6
TECHNICAL DATA the width of the track 340mm the width of the shaft 380mm diameter of the opening blade 70mm shaft diameter 55mm * in advance a shaft extending toothed + Two rows odrzutników + pressing roller slip, smooth + ARM latch clamp + pressing roller slip, smooth + flingers + The saw shaft + slip smooth roll + ARM latch clamp + pressing roller slip, smooth + ARM latch clamp + pressing roller slip, smooth + * from down shaft insertion towing gear + flingers + caterpillar + The s... more
4
Cross cut saw for solid wood with automatic pushing fence - CE regulations - Voltage: 3 x 380 v / 50 Hz - Pushing fence SPE 5000 - length 5000 mm - Execution sawing machine TR450 * support table on the left 1000 mm and right 1000 mm side of the saw * support tables with guide yet without stops * safety command with two-hand operation Figld9u * microswitch on the door to shut off the saw motor when the door is opened * thermal safety with min and max coil * upper safety hood * motor 5... more
4

End cut-off and loader for moulder machi Friulmac FN3

San Giovanni al Natisone (Udine), ItalyItaly dealership location
7089 km
used
End cut-off and loader for moulder machine, brand Friulmac, model FN3, second hand. Technical data: Working length: Min. 250 mm. max 1300 mm. Maximum working width: 160 mm. 9ova0zae9 Working thickness: min 10 mm. max 80 mm. Motor power saws: 4 + 4 Hp Hydraulic power unit engine power: 2 Hp. more
6

band resaw DANCKAERT 1100

BEVEREN-LEIE, BelgiumBelgium dealership location
6183 km
used
Band resaw DANCKAERT with wheel diameter 1100 mm (44 inch). For width of saw up to 135 mm (5,3 inch). 8xvgkfjl8 Main motor 30 KW / 40 HP. Feedroll (single) with hydraulic speed variation and opening and closing. Beautifull unit which was always maintained correctly. more
3

circular saw HSM 450

Hamm, GermanyGermany dealership location
6440 km
1998
used
Circular saw to cut plastic roll.. Baatyx23bq max. size of the roll Diameter = 450 , lenght 800 mm, with core 76 mm 2 cutting blades are included. The setting of the cutting width is made on the operation panel and done in automatic mode. more
large cutting band saw with 1250 mm roll diameter 45 kw motor Roll width 120 mm with Electr. Blade tension very good condition because little run in 1997 was overhauled Bbh2ilxrch more
4

Lamination bandsaw with mechanization Gillet RO 120

F- Dunieres, FranceFrance dealership location
6504 km
1971
used
Lamination bandsaw Gillet with indentation, Abschrauben roller, and Sortiertisch.Schaltschrank neuMax forward stop 180mmMax. Band width 155 mm, width adjustment Elektrisch.Die machine must be our buyer dismantled and taken away. Jccpc8n more
1
Lumber circular saw manual feed Swivel up to about 45 degrees. manual stop. CA 15 KW motor with brake 380 Volt Grt0bo9 more
5

3 pc. Band Resaw Stenner

Reutlingen, GermanyGermany dealership location
6676 km
1990
used
Band resaw Stenner, 3 pieces All saws are with swiveling stop Kyav2yc 1. Stenner VHJ 105 - 1 pc. Roll diameter - 1 050 mm Sawsheet width - up to 130 mm Feed rate - up to 60 m / min. Main motor - 22 kW Cutting height - up to 300 mm Available from 11-12.2017 2. Stenner VHM 36 - 2 pcs. Roll diameter - 915 mm Sawsheet width - up to 105 mm Feed rate - up to 36 m / min. Main motor - 15 kW Cutting height - up to 300 mm. Very good condition. Available immediately. more
7

LAMINATION BANDSAW CANALI

PLAWINSKA 19, 97-540 GIDLE, PLPoland
7189 km
1980
ready for operation (used)
LAMINATION BANDSAW CANALI WITH MECHANIZIERUNG Djkahcb more
7

RE-SAW BONGIOANNI SRE 1100

Via Roma, 1, 36035 Marano Vicentino VI, ItaliaItaly
6971 km
refurbished (used)
"BONGIOANNI" mod. SRE 1100 SELF-CENTERING RESAW - Flywheels diameter : 1100 mm Cs0xj9f8 - Main motor power HP 30 - FULLY RECONDITIONED, with NEW ELECTRIC PLANT and NEW MOTOR. more
6
Crosscut REMA DCKLW location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client Cover Bzs0hcb startup Type negotiated description Comments MACHINE HA hydraulic pedal-operated, Saw Kapow INDUSTRIAL DISTRIBUTION BROKEN cutting width of 800 mm After a major refurbishment motor 4 kW contact more
9

Band Resaw Primultini

Via Udine 32B, 34071 Cormons, ITItaly
7093 km
good (used)
Technical Data: Saw wheel diameter (DX) mm: 1100 Saw wheel dimensions mm: 7700xLx1,1 Number of spindles: 2 Spindles diameter mm: 1100 Bbsutcgui9 Spindles width mm: 120 Band resaws diameter mm: 400 Height mm: 270 Horsepower: 30 With safety fence and mechanical system for loading and unloading planks more
6

Lamination bandsaw Hema UH 900 TR

Oberteisendorf, GermanyGermany dealership location
6944 km
2017
as good as new (ex-display)
Hema cutting band saw UH 900 TR year 2017 continuous feed 3ljgjgu more
6

AUTOMATIC CROSS CUTTING MACHINE CURSAL TRV 500

Roveredo di Guà (VR), ItalyItaly dealership location
6996 km
1998
used
AUTOMATIC CROSS CUTTING MACHINE with loading/unloading devices - CURSAL TRV500 year of manufacturing 1998 CE standard blade diameter 500 mm power supply 5 kw Rhr8ytvpo motorized loading belt- length 5500 mm motorized unloading belt - length 4000 mm - No. 1 automatic reference stop more
5

REWSAW RAIMANN B130

Wien, AustriaAustria dealership location
7156 km
1991
used
Sell Rewsaw Raimann in like new condition with electric control system, complete mechanization ..... L9d2b more
3

DIVIDE SAW

Sułkowice, PolandPoland dealership location
7273 km
used
WHEEL DIAMETER 1000MM MOTOR POWER 7,5KW DELTA/STAR START Gtltiz203 FEEDING WHEEL HEIGTH 240MM SCREW BAND TENSION more
6
Crosscut IRION UKS 600 Length Machines mm 8000 Table length 3000 + 3000 + 45000 Epychbvl Number of heads pcs. 1 Number of engines pc. 5 Maximum Working Width mm 600 Machine for simultaneous transport and processing element so The machine has CE marking as The machine used so Motor power 7.5 kW Supply voltage V 380-400 Security Guards so Feed Roller 12 Automatic adjustment so Very Good Condition so Many accessories attached as Equipped with a tray so crosscut on hydraulics irion transport the fe... more
4

band saw, band resaw CENTAURO Supercut 80

St. Peter, AustriaAustria dealership location
7166 km
2017
new
Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feed... more
6

Automatic line for solid wood panels IM CS 1300

Gornji Kneginec, CroatiaCroatia dealership location
7268 km
2017
new
Autimatic line for cutting off for solid wood panels B9xytvcm Min - max working width - 100 to 1300 mm Min - max working height - 3 to 130 mm Min - max working length - 600 to 6000 mm Automatic adjustment for cutting (first cut, last cut, cut on size...) You can put 6000 mm long panel and cut on size which you want... Machine control and servo motor : Siemens Automatic infeed to planing/sanding machine... Automatic exit from sanding machine with panels turning machines... All parts can b... more


Cutting-of...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close