Used Eht Multiswing 4-32 for sale (60)

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) Iedpfxsxaa A Ns Abvoth - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm Iodpfx Absxab Tvovoth 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S Itsdpow Sttaofx Abvjh EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm Itodpfx Abowzvntjvsh cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Itodpfx Aswrhwuobvjh

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Ijdpfxszd Tf So Abvoth Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Itodpfx Aezd S Thebvjh Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec - Pneumatic upper and lower tool clamping - Die shifting Itjdpfxozd Sqyo Abvoh - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 - Compensation - 2-hand foot control - Side protective doors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,050 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Sheet metal width: 4,050 mm Iedpozapq Djfx Abvsth Sheet metal thickness: 8 mm Control: conventional

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: Ijdpfxoy Saure Abveth - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Itedpfoy D Sy Rjx Abvjh Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Itodpoygw Ahsfx Abvoh Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm Itjdpfxogxnkks Abveh -Weight 5.1 kg/pc.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit Itodpfx Asgxnkcobvsh

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 Itjdpfxstqmvzs Abvoh - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Ijdpfsyw Rbyox Abvoth Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Iodpfxsxwnqcs Abvoth

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, controller model: Cybelec ModEva 10S, empty load weight: 16,300 kg, bending force (max.): 170 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Itjdoxwnv Eopfx Abvsh Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT Ijdpfx Abox Da D Ueveth or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l Itjdpfx Asyzi Nwjbvoh total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic, slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Ability to enter target and actual values for the backgauge * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop with T-slot

Condition: ready for operation (used), Year of construction: 1995, pressing force: 204 t, stroke length: 330 mm, total width: 2,000 mm, total height: 3,200 mm, overall weight: 17,700 kg, travel distance Y-axis: 330 mm, product length (max.): 4,000 mm, number of axes: 4, This 4-axis EHT EHPS 20-35 press brake was manufactured in 1995. It features a pressing force of 2,000 kN and a bending length of 3,550 mm, providing robust capabilities for metal forming. The machine includes a distance between columns of 3,050 mm and a throat depth of 350 mm. If you are looking to get high-quality bending capabilities, consider the EHT EHPS 20-35 press brake we have for sale. Contact us for further details. • Control Unit: DNC 806 PS • Distance Between Columns: 3,050 mm • Throat Depth: 350 mm • Backgauge Range (X-Axis): 5 – 1,000 mm • R-Axis Adjustment Range: 115 – 265 mm • Main Motor Power: 18.5 kW • Total Connected Load: 25 kW • Hydraulic Oil Capacity: 400 l Itjdpezc Igiofx Abvsh • Lower Tool: Multi-V Die (Installed) • Condition: Good • Power Supply: 3 Phase • Frequency: 50 Hz Technical Specification Bending Length 3550 mm

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears Isdpfxsywzbdo Abvjth -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, Year of construction: 1993, pressure 110 t chamfer lenght 2550 mm Control Cybelec DNC 70 weight 9000 kg dimensions 3000 x 2100 x 3000 mm Itjdszcqyrepfx Abvjh

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Itjdpjybdknsfx Abveh

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Ijdpsy H Ilbjfx Abveth Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short