Used Tcd 4 for sale (58,936)

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Ksdsp Am T Uopfx Aafjnb Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550mm Maximum cutting height: 200mm Saw blade arbor: 30mm Undertable extraction port: 120mm Parallel fence with fine adjustment Fence ruler length: 1200mm, swiveling Extension table: 1250x650mm Cutting length: 2800/3200mm Crosscut fence: 3200mm, swiveling 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction when swiveling. 3-line LED display for height, angle and speed Circular saw table extension up to 1620mm behind the saw arbor, anodized aluminum On/off switch on the sliding table Sliding table: 3200mm, anodized 10 years Felder warranty on "X-Roll" Swivel mechanism for extension table Cutting width: 1250mm Upper guard cutting width: 1250mm Extraction port: 100mm Electrical system Kappa 550, 3x400V 50Hz CE, 10 KW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick View Kjdpfx Aaoz Dyfcefsnb Location: Flörsheim Availability: short notice

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking Kedpfx Aaozxdk Iofenb

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 Knjdpfxjydv I Do Aafeb • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, Year of construction: 1998, Format: 520 x 740 mm Equipment: 4 Colors Offset press + Coater axial, circumferential diagonal remote control SAPC - Semi-automatic plate change Komorimatic damping All wash-up device automatic PQC: console for ink, Chromed Cylinders Knedpsx R Dk Uofx Aafsb Water temperature controller AEC The press comes with a significant spare part package.

Condition: used, functionality: unexamined, total height: 340 mm, total width: 460 mm, total length: 700 mm, overall weight: 50 kg, Ferwood Code: RU0001789 - Manufacturer Code: MW 13,5Y10-4 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Kodpfxjz Dumbs Aafsnb

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,540 mm, total length: 6,240 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s Kedpfx Aoxd Exdeafenb · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,550 mm, total length: 6,238 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm Knsdpfxoxd Ev Aj Aafsb · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Kodpfxsz A Aw Ss Aafjnb

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Kodpfxez Dbure Aafenb Other used rack and pinion group cutters up to module 10 on request

Condition: excellent (used), Year of construction: 2014, Sheet size (mm): max. 760 x 1270 Pockets: 4 Kodpfx Aajz A Diiofonb Equipment / Additional information: With delivery Round pile feeder DESTA BAS/FSA 800

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,640 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm Ksdeyb Tqqopfx Aafjnb · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: used, Year of construction: 2015, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 Knsdpjzrkxrsfx Aafob - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 Ksdporrh T Ajfx Aafenb CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Kedpfx Aaoz Ar R Dofjnb Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Knjdpsz A A Iwsfx Aafjb Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Kjdpfx Aaoz Ar Ucofonb Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame Kodpjwq Sv Ejfx Aafenb

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg Kedjzq Dcuopfx Aafjnb

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade Knsdpfx Asyhdz Tsafjb

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 Kedpfx Aajzx Alkjfsnb - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: like new (used), functionality: fully functional, planing width: 400 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Italian, in excellent condition! Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Perfect condition! Knjdpszx A Ncefx Aafob TECHNICAL SPECIFICATIONS: - Table length 2500 mm - Working width 400 mm - 4 traditional knives - 3kW motor - Shaft RPM 5000 - Shaft diameter 120mm - Both tables adjustable - Stable, solid fence - Shaft noise reduction system Machine dimensions: - Length 250 cm - Width 70 cm - Height 100 cm - Weight 550 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines: band saws, circular saws, crosscut and miter saws, thicknessers, planers, sanders, horizontal and vertical drilling machines, feed systems, sharpening machines, four-sided planer, 4-sided, 3-sided, three-sided, two-sided, thicknesser, planer, sander, jointer, planer-jointer, planer-thicknesser, jointer-thicknesser, cleaning machine, mortiser, dowel machine, parquet machine, trimming machine, rounding machine, for log homes, milling machine, milling machines, spindle down, spindle up, top, bottom, sanders, wide belt, narrow belt, throughfeed, cylindrical, disc, angle, planer, drill, drills, horizontal, radial, milling machine, multi-spindle, edge banders, edge banding machine, veneer machine, press, presses, lathes, log splitters, briquetting machines, briquette machine, chippers, chipper, wood chipper, boring machine, boring machines, dust extraction, dust collectors, extractor, extractors, fan, fans, sharpener, sharpeners, compressor, compressors, sharpening machines, multi-functional.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Knsdpsz Dta Tefx Aafob Window cassette with control unit. Mobile delivery with continuous speed control.

Year of construction: 2007, condition: used, Temperature range 140 °C Knedpfxjzpbips Aafob heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 mm weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Kedpfx Aaez A H Sasfjnb Storage location: Supplier