Used Scheer Db 4 for sale (69)

Condition: like new (used), This used SCHEER DB 4 universal dowel boring machine has been functionally tested, worn parts have been replaced and the machine geometry has been readjusted to ensure maximum precision. The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling construction holes, for drilling holes in rows in a 32 mm grid system and for drilling a wide variety of fittings; it enables all these tasks to be carried out quickly, precisely and without long set-up times. Extremely simple operation via symbols and 4 program preselection controls for changing over to the new work process in seconds. Fodpeu Rqi Aefx Ahneph Central adjustment of the removable side stops, therefore always flush at the front edge, precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or at the correct angle. The doweled corner joint is always flush, both on the edge and on the surface! No CNC machine can achieve this as easily and quickly as a SCHEER DB 4. Safety clamping device across the entire table width, clamping of the workpieces directly on the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports make it easier to push through and drill long workpieces, fold-up workpiece support tables facilitate line drilling and hardware drilling. 2 drilling units Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling through rows of holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO CONTROL. This ensures the operational safety of the machine for the future! Gantry passage: max. 950 mm Working length: max. 2360 mm

Condition: excellent (used), 25 vertical drills 25 horizontal drills 2.2 kW upper motor Fpodpfjy S Awcox Ahnoh 2.2 kW lower motor 100 cm ground clearance

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Fedpfx Ajv Trlmshnjph Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: excellent (used), Year of construction: 1988, Scheer dowel drilling machine DB 12 used 3 spindles 32 mm drilling center distance Motor 1.1 kW Max. drilling depth 70 mm Location: ex stock 54634 Bitburg - immediately available - Fodpfxoy Ahuhs Ahnsph

Condition: used, boring spindle 21 dividing 32 mm hollow max. 1.000 mm swivable pneumatisch ° Fodewp E Uxepfx Ahneph

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Fpedpjyy I Snefx Ahnjh

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit Fpjdpfx Asyvl Hzohnoh with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Location: Röllbach

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine - 21 drilling spindles - 32mm spindle pitch Fpedpfeytvarjx Ahnoh - 380 volts - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm - 2 pcs longitudinal stops

Condition: used, Year of construction: 1975, used hole line drilling machine Fpodpori R Haefx Ahnsh Model Scheer DB 20 table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips Fodpsw Nabxofx Ahnjph for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm Fpjdpfx Aoxx D D Ishnjh With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Fpjdpfew I Um Hsx Ahnsh Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Fsdpfx Ajkwg Rcohnsph Dimensions: 140x88x160 Weight 420 kg Availability: short notice Location: Flörsheim

Condition: used, Used machine Equipment and technical data: - Double-sided line boring machine - 2 drilling motors, each 1.8 kW, with oil brake cylinder - Stroke max. 130 mm - With pneumatic directional control valve - 21 spindles, spindle pitch 32 mm - Max. drilling distance 640 mm (by moving the workpiece up to 2656 mm) - Portal clearance 850 mm - Air consumption at 5 bar approx. 11 l per cycle - Extraction nozzle 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Fjdpfxswlwpgo Ahnoph Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Fjdjwuuxkjpfx Ahnjph Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm Fjdpfx Ahsdardxoneph drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence Fsdpfx Aheh U Damensph 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Fpodovwf N Hspfx Ahnoh

Condition: used, Year of construction: 1980, second hand Make Scheer Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below Fodpfxovwfuvs Ahnjph pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Fpedolfcnwopfx Ahnoh Workpiece thickness ca. 100 mm Working width 650 mm Foot-operated drill machine Scheer type BM340

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, SCHEER PA 7004 – 4200 x 4681 mm LIKE-NEW panel dividing system DIRECTLY FROM THE MANUFACTURER with lifting table, optimization software, and new PC control LIKE-NEW 1 year warranty For sale is a fully overhauled SCHEER PA 7004 panel dividing system with a processing capacity of 4200 x 4681 mm. The system has been technically and visually refurbished and features a new industrial PC with a Linux operating system, network connectivity, and remote maintenance capabilities. Ideally suited for industrial carpentry workshops, furniture manufacturers, interior design companies, and panel processing companies that value precision, performance, and high availability. Equipment and highlights: New PC control New industrial PC with Linux operating system Network connectivity (LAN/WLAN) TeamViewer remote maintenance USB interfaces Graphical cutting plan display Multilingual user interface 15" flat screen in the swiveling control panel Optionally available with label printing system Panel saw FM 22-4200 Hardened guides Servo-driven saw unit Feed speed 2–70 m/min Return speed up to 100 m/min Automatic lowering of the saw unit Main saw 11 kW Scoring saw 2.2 kW Automatic cut height adjustment Cut-off device Lamella protection curtain Safety guard locking Workpiece clamping protection Technical data: Cutting length: 4,200 mm Fence depth: 4,681 mm Cutting height: 115 mm Fully automatic angle pressing device For precise cross cuts with automatic workpiece fixing. Material feed table HP 5100 Servo-driven material pusher 2 top guides Rack and pinion guide 7 retractable clamping fingers 3 controlled extraction bolts 11 triple roller tracks Feed speed 25 m/min Return speed 50 m/min Four-spindle lifting table TE 5085 Table length 4,200 mm Table depth 2,800 mm Lifting height 640 mm Lowering height 280 mm Motor-driven roller tracks Right and left operation Recesses for rear loading Automatic alignment systems Longitudinal alignment WP 5038 Double execution Two motor-driven alignment fingers For panel lengths up to 4,800 mm Cross alignment WP 5037 Fpedjza Efwepfx Ahnjh 3 pneumatic stop and alignment cylinders Integrated braking system Workpiece support Angle stop table HP 5094 2 workpiece support tables HP 5095 Air cushion system LK 5161 Radial fan and piping system included Optimization software OPTIMIN The system features the proven OPTIMIN cutting plan optimization. Bills of materials are entered directly into the machine, automatically optimized, and immediately made available for processing. Advantages: Material savings Shorter processing times Optimal utilization of the system Easy operation Additional equipment: Powered roller track on the right Set of carbide saw blades Operating manual Hardware key for optimization software Conclusion A powerful and extensively equipped panel dividing system with modernized control technology, automatic alignment, lifting table, and optimization software. The machine has been completely overhauled and is ready for immediate use. ✓ LIKE-NEW ✓ New industrial PC with Linux ✓ Network compatible & TeamViewer ✓ Optimization software OPTIMIN ✓ 1 year warranty

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 Fpjdeyxr T Topfx Ahnsh With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg - 2000 watts - 7 kg - Speed: 10,000 – 18,000 rpm Fjdpex R Efgefx Ahnjph Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: used, Year of construction: 1985, functionality: fully functional, Scheer DB5 line boring machine - Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm pitch - stop ruler - various dowel drills - portal clearance: 1056 mm - 2.2 kW Fsdpewv Uy Djfx Ahneph Transport available at extra cost!

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Year of manufacture: 2008 Fpjdpfehfmrtjx Ahneh Scheer SGS 100-E4 Condition: good, functional tested Available immediately