Used Emulsion for sale (242)

Condition: excellent (used), IAG High-Performance Separator Model: MF500 Year: 2019 Capacity: 600 l/h Dkjdpfx Ahexr A Uxe Usw Voltage: 400V Suitable for coolant lubricants, cleaning solutions, aqueous solutions The mobile MF separator is used wherever micro-contaminants and tramp oil need to be removed from aqueous fluids. Even when the contaminants are smaller than the actual components of the fluid, the MF separator reliably removes them without the slightest impairment of the original liquid. Example in cast machining: Removal of graphite from water-mixed coolant lubricant. In such cases, the contaminant is up to ten times smaller than the actual emulsion oil droplets. A particular advantage: In every application, the liquid is thoroughly aerated. The mobile MF separator can be used to service multiple machines and tanks one after the other. The MF separator can operate unattended day and night, as it is equipped with self-monitoring capabilities.

Condition: new, Year of construction: 2025, Available in stock Dkodpfxod Swg Hj Ah Uew Advantages: Universal assembly system. Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. Built-in heating system (gas propane burner). BS-500 can be mounted on a trailer or transport vehicle like a pick-up. Asphalt Sprayer BS-500: Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 kW). Engine power – 3.6 kW. Fuel gasoline. Hand spraying rod length – 4 m. Spraying bar length – 7 nozzles. Emulsion tank – 500 l. Warranty – 1 year.

Condition: good (used), Emulsion splitting system, oil-water separation system (for the removal of condensation water from compressors) The most cost-effective and permanently reliable Dksdegvu Tgjpfx Ah Uow solution to the problem is usually the oil/water separation for dispersed condensates. The purified water complies with the legal regulations for sewer discharge

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Dksdpfxsv I Tfde Ah Uew Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: ready for operation (used), Emulsion Treatment System with Chip Conveyor,vacuum rotation filter KNOLL VRF 250, Used Machine Manufacturer: KNOLL Type: VRF 250 Overall dimensions: Width: 2300 mm Depth: 1860 mm Height: 2300 mm Weight: 1140 kg Dsdpfx Ahsw T U Nrj Uskw Year of manufacture: 2020 Electrical data: 400V; 14.64 kW Tank capacity: 1450 l Filter capacity: 250 l/min

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Dkedpfx Ahownr Ipj Uow

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) Dsdpfxow Hzfzo Ah Uskw d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: new, Year of construction: 2025, Bitumen Emulsion Sprayer BS-1000 Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: Dodpfx Aevptnuoh Uokw - Productivity – 36 l/min. - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Dedpfx Aelf D Ugjh Ujkw Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Condition: good (used), Manufacturer: KNOLL Dkodpfsk E Dxkox Ah Usw Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity depending on viscosity.

Condition: new, Empty weight: 16.000 kg Capacity: 10 m^2/h Dkjdpfjw Hzcajx Ah Uow Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: new, functionality: fully functional, Year of construction: 2025, BS-500 PRO Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Dedsvuaccepfx Ah Uekw Productivity-28 l/min Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Condition: ready for operation (used), Emulsion Treatment System, Knoll 320 s-1/200, FKA/950, Used Machine Manufacturer: Knoll Type: FKA/950 Chip Conveyor: 320 s-1/200 Year: 2015 Key Features: High-quality German industrial technology Robust and reliable design Efficient filtration for cooling and lubricating fluids Ideal solution for central or local filtration systems Application Areas: Mechanical engineering Djdewmmvrepfx Ah Uekw Metalworking Fluid management for CNC machines and production lines Cleaning of cooling and lubricating emulsions

Condition: new, functionality: fully functional, Year of construction: 2025, Bitumen Emulsion Sprayer BS-200 Bitumen Emulsion Sprayer BS-200 by TICAB TM is an optimal equipment for small patching repairs, as well as for road works in a limited space (yards, alleys) and for sealing areas and cracks. Djdpst If A Defx Ah Uokw SPECIFICATIONS: - Productivity - 400 m² per 1 hour. - Consumption of bitumen emulsion - 200 l/h. - Hand Spraying Rod - 4 m. - Cleaning System - 3-level with diesel fuel. - Function of tank self-pumping. - Strong metal frame on wheels for easy movement. - Heating system of the tank with emulsion.

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L Dkedpfjiw Eafox Ah Ujw - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: new, Year of construction: 2025, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel Dkedpevpg Eaofx Ah Usw - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor - Lance for manual sprinkling Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg Price: 9600 Euro (Netto) Price on the trailer: 15000 Euro

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dkjdpfx Aoxt E Iqjh Uew Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge - Connection for external compressed air supply - Ventilation device - Cleaning wash nozzles

Condition: ready for operation (used), Year of construction: 2019, operating hours: 213 h, Control Unit Brand HURCO Model MAX-5 Media Chip conveyor Yes Additional Equipment 30 tool changer Laser bridge Djdpfxsxu Rw Hj Ah Uskw Accessories direct measurement Clamping devices Vice Probe 2 software units / (1 x plain text dialog programming on the machine + 1 x for ISO- / code programming by external programming device or CAD/CAM system) Pentium technology, SSD (solid-state drive) storage medium, / 2 GB RAM, Ethernet interface, USB interface, system-internal self-diagnosis, WINDOWS platform Chip splash guard cabin/Coolant system/Coolant spray gun/Flushing system to support chip removal/LED machine light in the work area Signal light for machine operating status/Set of machine shoes/High-pressure cooling system for coolant supply through the spindle: /Cooling lubricant type Emulsion/Coolant pressure 20 bar/Integrated hydraulic tool clamping system This 3-axis Hurco VMX30i vertical machining center was manufactured in 2019. It offers robust construction and precision engineering, ideal for a variety of machining tasks. Consider the opportunity to buy this Hurco VMX30i vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, rotational speed infinitely variable, DMG-MORI DMU 60 EVO linear Year 2014 Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC tilting rotary table, B and C axes Tool magazine with 60 stations Heat exchanger for spindle and table Dynamic package Djdoxvhrwopfx Ah Uekw Control: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Blum laser tool measurement Scraper belt conveyor, HPC with paper band filter and 80 bar Oil mist emulsion separator Programmable coolant nozzles Electronic handwheel, mode 4 Turning and milling cycle

Condition: used, Year of construction: 2025, machine/vehicle number: IntNr231426, Filtration System E 120-BSC-2-H Oil / Emulsion Mist Extraction Units FEATURES / CHARACTERISTICS: - Service door opening direction: upwards, in airflow direction - Air outlet: radial - Equipped with pre-filter and mechanical neutralization filter, plus two electrostatic filtration stages for aerosols, consisting of ionizers and collectors - Adjustable fan (ErP-ready) - 'Ready for operation' status indicator - Electrical system compliant with EN 60204 - Entire system constructed in accordance with current Machinery Directive TECHNICAL DATA: - Fan capacity: 2,400 m³/h (free blowing) - Extraction capacity: up to 1,200 m³/h - Operating voltage: 230 V +/-10% (207–253 V) - Frequency: 50–60 Hz - Connected load: 0.93 kVA - Differential pressure: 840 Pa - Sound pressure level: approx. 70 dB(A) - Maximum operating temperature: 40 °C - Protection rating: IP54 Transition Piece E/M 120/240, 200-S-B-90 E-120-BSC-2: 84213925 – Country of origin: CZ Power plug: 85444290 – Country of origin: DE Customs tariff number: 84213925 Dodexu Natspfx Ah Uekw Dimensions (L x W x H): 1,130 x 660 x 610 mm Weight: approx. 110 kg Warranty: subject to agreement Paint finish: RAL 7035 (light grey) or as agreed Delivery time: subject to agreement Technical data, specifications, and availability subject to change and corrections. Prior sale reserved.

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Dkedpfx Ahjv Drigs Uow Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Dkedpfx Aoxtr Iwjh Uew Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Dkodoxtwncopfx Ah Uew Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: Stufe1 L1020/300/1 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 mm Machine weight 3400 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Dsdpfx Ajxrwfxsh Uekw Pallet Sequential Operation Enclosed Work Area Enclosure Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Dsdpfovzahxex Ah Ujkw Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m