Used Emulsion for sale (292)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 36,057 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Series 32i-Model A, total height: 2,735 mm, table width: 400 mm, table length: 400 mm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm. Machine Benefits Technical Machine Benefits • 75 bar high pressure pump and a knoll 1. 200l emulsion tank. Chsdpfx Ajzwpiyjfxob • Tool-to-tool cycle time of 0. 9 seconds, and a rapid feedrate of 60 m/min. Dimensions Machine Depth 4205 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) Chjdsy Tw R Hopfx Afxob • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating statuswith deep-hole drilling cycle function Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, contact us for getting more information and pictures on mail(at) or Cjdpfxegrz Hbj Afxehb *

Condition: used, Year of construction: 2016, Coolant cleaning system Csdozwccmopfx Afxshb Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm Csdpsht Hg Defx Afxshb BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 Cjdpeu Ivauofx Afxshb ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Dimensions 260 x 160 cm Height 215 cm.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,229 h, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 310i-S, number of axes: 8, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) Chodpox D H I Tjfx Afxjb • Chip discharge height: 1250mm Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, table load: 150 kg, overall weight: 9,000 kg, number of slots in tool magazine: 44, tool weight: 5,000 g, number of axes: 4, This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information. Additional equipment • Measuring Probe RWP20.00 • Enclosed Work Area Enclosure according to UW • Some SK40 Chucks • Hydraulic/Pneumatic Clamping Option in the Machining Area • Römheld 8400-185 Hydraulic Unit, Max. Pressure 500 bar • Flushing Gun in the Machining Area • Replacement Milling Spindle Available Machine Benefits Technical Machine Benefits • Total power requirement: 14 kw • A-axis: 360 x 0. 001°, 20 rpm • Table/pallet size (lxw in mm): 1 bridge with 4 sides, l1800mm, 4x113mm • Table/pallet alignment type: m10 & 10h7 grid • Tool magazine type: chain magazine Codpfx Afozvvk Ujxohb • Coolant type/content: emulsion (internal & external) / approx. 480 l • Coolant unit: clefil rbf-e100 20 bar via m-befeld, max. 75 l/min • Some hydraulic and pneumatic hoses replaced • Lt module replaced in the control cabinet • Regular maintenance was performed Extra Information Machine still under power Dimensions Machine Depth 6500 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm Csdpfx Afjzvu Ryjxohb • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Chedow Ng D Hopfx Afxjb Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm Cedpfjwtd A Njx Afxshb - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2015, operating hours: 38,504 h, functionality: fully functional, torque: 200 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,935 h, number of spindles: 1, number of slots in tool magazine: 60, DMG MORI DMC 1450 V Vertical Machining Center | Year of Construction 2015 | SK40 & 60-position Magazine For sale is a robust and precise vertical machining center from the manufacturer DMG MORI, model DMC 1450 V. This machine, built in 2015, is extensively equipped, including with internal cooling, a direct path measuring system, and a 10,000 rpm spindle with 200 Nm of torque. In 2021, the spindle was professionally replaced after an incident. General Machine Data * Manufacturer: DMG MORI * Model: DMC 1450 V * Year of Construction: 2015 * Machine Number: 14595607194 * Operating Hours: 38,504 h * Spindle Hours: 12,935 h * Machine Weight: 9,900 kg Control System * Type: Siemens 840D solutionline Operate 3D control system Spindle * Speed: 10,000 rpm * Torque: 200 Nm * Tool Clamping: SK40 * Note: Spindle replaced after incident in August 2021 (according to service history) Tool Changer * Magazine Positions: 60 positions * Tool Clamping: SK40 Coolant & Disposal * Internal coolant supply (IKZ): Basic package 3 * Blow-through air through the spindle center * Coolant/air switching Chodpszypzzjfx Afxsb * Flushing gun for chip flushing * Oil and emulsion mist separator (mechanical) Additional Equipment & Measuring Technology * Path measuring system: Direct path measuring system X, Y, Z * Measuring probe: Infrared TS649 DMG * Enclosure: Operating mode 4 * Software: DMG Netservice - client Excerpt from the Service History * 10/2022: Complete replacement of the X-axis bellows * 03/2022: Replacement of the Y-axis roof * 12/2021: Replacement of the left-hand blind * 10/2021: Timing belt renewed * 08/2021: Spindle replacement after incident * 2020/2021: Work/replacement on the OP019 TFT 19" screen From an insolvency proceeding, sold as is. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology Cjdpfx Ajzyplgofxohb * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: WEISS CNC, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 650 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:650 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 500x60 mm Workpiece headstock: Speed:10 -650 rpm Csdpfjzvt Iqsx Afxshb Workpiece weight max.:250 (100) kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:20 - 50 m/s Grinding disc dimensions right:500 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:700 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter:50 mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl - GROB4Pilot, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl - GROB4Pilot Speed : 16000 rpm Movement X/Y/Z : 1050/800/1050 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl – GROB4Pilot Travel ranges X/Y/Z:1,050/800/1,050 mm Speed:16,000 rpm Tool holder:HSK 63 Fluid supply:coolant + blast air Spindle: Technology:Direct drive spindle Chsdpfjzu H Afsx Afxob Speed:16,000 rpm Max. torque:206 Nm Max. power:32 kW Tool holder:HSK 63 NC rotary table: Technology:NC rotary table with pallet clamping system B-axis:0.001° Pallet size:630 x 800 mm (630 x 630 mm) Fluid connections:6 Tool magazin: Technology:4-disc magazine Number of stations:237 Tool changer:Pick-up Tool cleaning:Mechanical Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Hydraulic clamping:4 clamping circuits, 30–190 bar Support control:Pneumatic Touch probe:Renishaw OMP 60 Tool measurement:Length measurement Set-up bay door:Can be operated automatically or manually Emulsion mist separator:Mechanical Pallets I:2 pieces 630 x 800 mm Pallets II:2 pieces 630 x 630 mm

Condition: used, Microcutter Inotec I 225CD 110D Codpjzwvxhofx Afxshb This Inotec microcutter is a highly versatile machine, commonly used in the sausage and pet food industries. This inline cutter processes large quantities of product at high speed, producing a homogeneous mass while effectively mixing the ingredients simultaneously. The settings can be adjusted from coarse cutting to fine emulsions. The cutter is equipped with a large feed hopper positioned at a convenient working height. This allows the product to be easily fed into the machine, directly from a bowl cutter if required. The emulsifier is suitable for inline installation. The cutting set can be easily installed and removed. The cutting set experiences minimal wear, ensuring a long service life. Temperature sensors help maintain consistent product quality. The intuitive control panel allows for easy program configuration. The machine is mobile and can be moved as required. Technical specifications: Production capacity: 6,000–15,000 kg/h (depending on the product) Hopper capacity: 200 L Cutting plate diameter: 225 mm Hopper feed height: 890 mm Voltage: 400 V (3 + N, 50 Hz) Power: 127 kW Weight: 1,000 kg Year of manufacture: 2009 Machine dimensions (W x D x H): 1,200 x 2,250 x 1,300 mm

Condition: refurbished (used), functionality: fully functional, grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, The machine has been completely disassembled, all wear parts have been replaced, and it has been repainted – it is in like-new condition. Sale includes a functional guarantee. Key features: - For resharpening and re-toothings of HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth form A, Aw, B, Bw, and C according to DIN1840 - Grinding of Vario teeth (option) - Grinding of special teeth (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments for segment saws - Chamfering on alternating top/bottom or on one side - Rake and clearance angles can be continuously adjusted - Improved machine guard for easy opening/closing Key advantages: - Short grinding times with high surface quality due to stable machine design with adapted clamping flanges for the saw blades and high drive power. - Consistent, repeatable quality thanks to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: - Saw blade diameter 20-550 mm - Maximum saw blade thickness 6 mm - Number of teeth 20-999 - Working speed 3-75 teeth/minute - Cooling approx. 5 bar at 40 l/min - Grinding wheel drive 2.2 kW - Dimensions L x W x H approx. 1750 x 1200 x 1800 mm - Net/gross weight approx. 800/980 kg - Paint color: Dove blue Accessories: - Software for grinding curve teeth, bevel teeth, circular grinding (Software extensions such as special teeth, Vario teeth, carbide teeth, available on request) - Saw blade arbors, diameter 400, 300, 215, 180, 140 mm (other sizes available on request) - Conversion to English language (keyboard input) possible - Reducing rings, diameter 16x22, 27, 32, 40, 50 mm (other sizes available on request) - Multiple grinding wheels, new and used, included Codpfepgkgqjx Afxshb - Basic arbor for saw blade arbors - Mechanical clamping nut - Cooling system incl. high-pressure pump, mist extraction, and magnetic separator, designed for cooling with emulsion. - Automatic central lubrication with lubrication pressure monitoring (linear guides + ball screw drive) - Operating manual incl. circuit diagrams - Operating voltage 400 V A trade-in of your existing used ECE 45 is possible. Spare parts that may be required later can be supplied by us.

Condition: excellent (used), BERTOLI H5 150 Homogenizer – Stainless Steel BERTOLI H5 150 industrial homogenizer in stainless steel, designed for high-pressure homogenization of liquid and semi-liquid products in continuous processes in the food and beverage industry. The equipment allows the product to be subjected to high pressure to reduce and uniform the size of particles or globules, promoting the production of a more homogeneous and stable mixture. This process is especially important in products where it is desired to improve emulsion stability, reduce phase separation, and achieve a more uniform texture. Its industrial construction and product-contact parts in stainless steel allow it to be integrated into continuous processing lines for thermal treatment, pasteurization, and production of liquid foods. MAIN FEATURES -Manufacturer: BERTOLI -Model: H5 150 -Type: Industrial high-pressure homogenizer -Continuous homogenization process -High-pressure pumping system -Robust homogenization block -Reduction and uniformization of particle size -Improvement of product stability and homogeneity -Product parts in stainless steel -Pressure control pressure gauge -Sanitary inlet and outlet connections -Industrial construction for continuous operation -Integrable into existing process lines APPLICATION The BERTOLI H5 150 is designed to receive the product continuously, pressurize it, and pass it through the homogenization system. The application of high pressure generates mechanical forces that allow the particle or globule size to be reduced and a more uniform distribution to be achieved, depending on the characteristics of the product and the process conditions. Homogenization can contribute to improving properties such as emulsion stability, texture, consistency, and resistance to phase separation. It can be integrated with: Pasteurizers and UHT systems Heat exchangers Chsdpfx Aswny Nzsfxsb Process tanks Mixing systems Sanitary pumps Deaerators Aseptic processing systems Automatic filling lines APPLICATIONS Especially suitable for dairy industries, beverage and juice manufacturers, sauce, cream, and emulsion producers, and other manufacturers of liquid or semi-liquid foods that require industrial homogenization. Depending on its configuration, it can be used for milk and dairy products, beverages, juices and nectars, sauces, emulsions, fruit preparations, and other liquid food products. The combination of BERTOLI technology and high-pressure homogenization provides a particularly interesting solution for industrial lines that require a uniform and stable final product. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), KRAMER + GREBE 200 L Industrial Cutter – Stainless Steel KRAMER + GREBE 200-liter industrial cutter, designed for cutting, chopping, mixing, and emulsifying food products in professional production processes. Manufactured by KRAMER + GREBE, a specialized manufacturer of machinery for the meat industry, this cutter features a 200-liter bowl and a high-speed rotary blade system that allows for processing the product to achieve different degrees of chopping, mixing, and homogenization. Its robust stainless-steel construction and industrial capacity make it a particularly suitable piece of equipment for meat processing plants and food product manufacturing. MAIN FEATURES -Manufacturer: KRAMER + GREBE -Type: Industrial cutter / bowl cutter -Bowl capacity: 200 liters -Cutting system using rotary blades -Circular processing bowl -Cutting, chopping, and mixing operations -Suitable for homogenization and emulsification -Construction primarily in stainless steel -Protective cover for the processing area -Integrated control panel -Robust construction for industrial use -Designed for batch processing -Hygienic design for the food industry -Easy access for cleaning and maintenance APPLICATION The KRAMER + GREBE 200 L is designed to perform intensive size reduction, mixing, and homogenization operations through the combined action of the rotating bowl and the blade system. The product circulates repeatedly through the cutting area, allowing for different degrees of processing to be achieved depending on the raw material, processing time, and selected parameters. It can be used for operations such as: Cutting and chopping Mixing Homogenization Emulsification Preparation of meat mixtures Preparation of fillings Mixing of ingredients Preparation of formulated products APPLICATIONS Particularly suitable for meat industries, sausage manufacturers, producers of ready meals, pet food, and other food industries that require a robust cutter for batch production. Depending on its configuration, it can be used to produce sausages, pâtés, meat emulsions, fillings, ready meals, and other food formulations. The combination of KRAMER + GREBE, a 200-liter bowl, and industrial construction in stainless steel provides a versatile solution for professional cutting, mixing, and emulsification processes. Chsdpfox S Ih Tox Afxob Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), LASKA 500 L Industrial Cutter – Stainless Steel The LASKA 500-liter industrial cutter is designed for cutting, chopping, mixing, and emulsifying food products in high-capacity industrial processes. Manufactured by LASKA, a specialized manufacturer of machinery for meat and food processing, this cutter features a 500-liter vat and a high-speed blade system that allows for reducing, mixing, and homogenizing the product during the process. Its robust stainless steel construction and large capacity make it an ideal piece of equipment for industrial plants that require intensive batch processing. MAIN FEATURES - Manufacturer: LASKA - Type: Industrial cutter / vat cutter - Vat capacity: 500 liters - Cutting system with rotating blades - Large-capacity circular vat - Cutting, chopping, and mixing processes - Suitable for homogenization and emulsification - Robust stainless steel construction - Large-format protective lid - Mechanized product discharge system - Designed for industrial batch processing - Hygienic construction for the food industry - High-capacity equipment for professional use APPLICATION The LASKA 500 L cutter is designed to perform intensive size reduction and mixing operations through the combined action of the vat and the blade system. During the process, the product circulates through the cutting area, where the blades allow for achieving different degrees of chopping, mixing, and homogenization depending on the product and the operating parameters. Its 500-liter capacity allows for processing large batches, making it particularly interesting for facilities with high production volumes. It can be used for operations such as: Chjdpsxp Rp Ssfx Afxsb Cutting and chopping Mixing Homogenization Emulsification Preparation of meat mixtures Production of fillings and preparations Reduction and mixing of ingredients APPLICATIONS Especially suitable for meat industries, sausage manufacturers, producers of prepared foods, pet food, and other food processing plants that require a high-capacity industrial cutter. Depending on its configuration, it can be used for the production of sausages, pâtés, meat emulsions, fillings, prepared products, and other food formulations. The combination of LASKA, 500-liter capacity, and industrial stainless steel construction makes this cutter a particularly interesting solution for large-scale production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). Csdpfszwlvcex Afxshb It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² Csdpfx Aemqkubefxohb tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right Cedpfxsmqkt Ts Afxjhb The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m Chodpomqkuuefx Afxob bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Directly from a mold-making shop: DECKEL MAHO DMC 70 V Control system: Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper size 40, 18000 rpm, 30-tool automatic tool changer, direct path measurement, internal coolant system 40 bar, enclosed cabinet, chip conveyor, LTA emulsion mist extraction system, Year of manufacture: 1999, only 14,400 spindle hours EUR 11,900,- + VAT * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements can be carried out at any time. Chsdpfx Ajzwdfvefxjb * Prices ex works, internal transportation and loading included.