Used Ecm for sale (47)

Condition: used, functionality: fully functional, ECM deburring machine VMB brand, formerly Kenametal Dodpfxozd Dwre Apwswa Currently not installed, but I will handle its relocation to the warehouse 2 units available

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals Djdpfx Ajxx Nkyopwowa # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: used, Year of construction: 2008, functionality: unexamined, Equipment: documentation/manual, ECM deburring machine including a double-chamber filter press and separate cooler. Available on short notice without warranty. Collection and transport must be arranged independently. Djdoy U Dyqjpfx Apwswa

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Dedpfx Aport Tw Dowewa Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Year of construction: 2022, condition: used, 2022 | Tecmor PF36N EPC | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7500 or Make an Offer. Dwodpfeznfcdox Apwja Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: TECMOR bender, working condition verified by owner , good condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40935 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, The Tecma Pack FM1200p box erector automates the process of forming flat-folded cardboard blanks into tray-style boxes. It forms and then glues the flaps to create regular tray boxes, ready to receive products. A tray box is essentially a cardboard tray with raised side walls. This design facilitates the loading of products while providing good support during handling, storage, and transportation. This format is particularly suitable for packaged food products, trays, pouches, and items intended for quick shelf placement. Tray boxes are among the common formats produced by industrial box erectors and tray formers. Forming and hot melt gluing First, the operator loads the cardboard blanks into the machine's magazine. Then, the FM1200P takes each blank and performs the various folds. Next, it forms the side walls and applies hot melt adhesive to the designated areas. Finally, the machine discharges a formed and glued box to the next station. As a result, it provides packaging that is ready for manual or automatic filling. This process improves the consistency of the boxes and significantly reduces manual operations at the end of the line. Integration into a packaging line The Tecma Pack FM1200P can operate upstream of a loading station, a case packer, or a conveyor. Thus, the formed tray boxes can receive products directly before closing, labeling, or palletizing. Furthermore, its programmable logic controller (PLC) facilitates cycle monitoring. The hot melt gluing system also ensures consistent box assembly. With a stated output of 1,200 boxes per hour, the machine meets the needs of industrial production lines that require a continuous flow. A clearly identifiable box format Therefore, the FM1200P does not produce a generic cardboard box. It produces a tray box, formed from a flat-folded cardboard blank. A photo of the resulting box should appear in the gallery so that the buyer can immediately understand the format that can be produced. However, the exact format of the box depends on the installed tooling and the dimensions of the blanks used. Therefore, it is advisable to present a photo of a box actually produced by this machine or by its current tooling. Technical specifications: Manufacturer and model: Tecma Pack FM1200P Machine type: automatic tray box erector Product: formed and glued tray box, ready for filling Output: up to 1,200 boxes per hour Dodpfxoy Nxnlj Apwjwa Gluing system: hot melt Machine power: 2 kW Gluing unit power: 4 kW Pneumatic supply: 6 bar – consumption of 7 m³/h Control: programmable logic controller (PLC) Weight: 1,000 kg Dimensions (L × W × H): 3950 × 1860 × 2250 mm

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON YOM 2013 Dwsdpfxsyrx Uvs Apwja AS NEW CONDITION MADE IN FRANCE

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm Dwedpfjd Stizex Apwja -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Dwodpfx Asd S Aqaepwsa -Mecman type: 167-05 5000-1 -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Stroke: 160 mm -Dimensions: 95/95/H515 mm -Weight: 4.5 kg

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Dwjdpozltyfefx Apwoa Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t Dedpfx Apou Nfttewewa 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, in stock, 12-month warranty, not a solvent oven! - Max. temperature: 250°C - Total steam volume: 20.5 m³ Dwsdpfx Apsttbf Uswoa - Usable dimensions (LxWxH): 2300 x 2750 x 2200 mm - Control system: Jumo Imago 500 - Heating capacity: 36 kW - Max. load for the oven cart: 6000 kg, electrically driven - Electric supply and exhaust air dampers: Belimo - Exhaust fan controlled via frequency converter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus rails in front of the oven - Own weight approx. 3,500 kg - Free-standing control cabinet - Documentation included - Electrically tested and supplied with a current DGUV measurement protocol Inspection at our warehouse by appointment. Car bottom furnace, oven, ovens, industrial furnace, convection oven, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, annealing oven, chamber oven, drying cabinet, hardening oven,

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Dsdpeir E E Eofx Apwswa Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Dsdpfeyangksx Apwowa Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, Vitronics Soltec mySelective 6746 Specifications The Vitronics Soltec mySelective 6746 is an inline selective soldering system designed for PCB through-hole soldering applications. Core Specifications | Specification | Details | |-----|----- | | Machine type | Inline selective wave soldering system | | Soldering method | SelectWave single-point selective soldering | | Fluxing system | X-Y MultiFluxer / drop-jet fluxing | | Preheating | Inline preheater | | Conveyor interface | SMEMA compatible | | Programming | Recipe-driven, barcode-capable | | Teaching system | Integrated teach camera | | Power | 3×400/415V, 50/60 Hz | | Electrical load | Max. approx. 29 kVA | | PCB handling | Inline conveyor with gripper transport | | Process capability | Single-point precision soldering | | Optional offline software| Easy Teach 2 with DXF import | | Networking | Traceability / network capable | | Typical industries | Automotive, aerospace, medical, military | Standard Features - SelectWave solder pot - Pressurized flux supply - X-Y fluxer - Inline preheater - Teach camera - SMEMA interface - Barcode verification support - Recipe storage and automatic process selection Optional Features - Dual nozzle SelectWave - Closed-loop preheat control - PCB warpage compensation - Advanced solder drainage conditioner (SDC) - Advanced process viewing camera - Easy Teach 2 offline programming Mechanical / Process Notes Dedoy Stx Repfx Apwewa The system is optimized for: - High-mix, low-to-medium volume production - Compact footprint for efficient use of floor space - Automated traceability - High-reliability soldering applications The conveyor/gripper system allows for process flexibility, including tilted handling (up to 10° as specified in brochures) for complex solder joints. Typical Standard Configuration (for used-market systems) Many installed systems feature: - 410 × 410 mm inline preheater - 130 µm drop-jet nozzle - Infeed/outfeed conveyors - UPS preparation - CE compliant safety features - Transformer packages (208↔400V)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, power: 11 kW (14.96 HP), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max Pump Speed: 2600 rpm Pressure Regulator: with hydraulic flow control X-T open Direction of rotation: right (viewed from drive shaft) Flow Rate: 2 x 68 liters/min at 1450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 32 liters Dwodpfx Apsx Szxlowea The unit is equipped with the following components: • 32-liter accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump for hydrostatic drives in open circuit. The flow rate is proportional to the drive speed and the displacement volume is adjustable. The swash plate allows infinitely variable adjustment of flow rate. 2 leakage oil connections Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Comprehensive regulator options Short response time The through-drive is designed for mounting gear pumps or axial piston pumps of the same nominal size, i.e. 100% through-drive capability.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. Dwedpfx Apjx Apntswja The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Dwjdpfx Aex Apg Aopwsa Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: excellent (used), functionality: fully functional, Intensive Vacuum Paddle Mixer Tecmaq Type Alfa 300 with arm lift for 200 L standard trolley, tiltable mixing vessels and: Dwjdpfxeyk Afcs Apwja - MC control – membrane keypad - Plexiglass cover – hydraulics - Tiltable mixing vessels – hydraulics - Lift for 200 L standard trolley – hydraulics - Busch vacuum pump - Machine completely reconditioned - Power: 4 kW / 3x 400 V / 50 Hz.

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Mechanical cycle time: min 24 s Dwsdpfx Apeq Ul S Tjwoa Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment delivery • delivery left • automatic wood inserter palletizer • pallet dispenser • transport rollers

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Mechanical cycle time: min 24 s Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment delivery • delivery right • automatic wood inserter Dwsdpfeq Ul Ugex Apwea palletizer • pallet dispenser • transport rollers

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Dwedoyuvc Ajpfx Apwoa

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift Dsdpfxjzhvcno Apwjwa - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: used, all stainless steel Dodszkt Aqepfx Apwswa belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: ready for operation (used), SEW Eurodrive CMP71L / BP / KY / AK1H / SB1 Motor SN 50.7155946102.0002.14,used, small traces of use, 100% functional, scope of delivery according to photos Djdpfxjl Sygus Apwjwa