Used Mep Falcon 315 for sale (116)

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75 mm rechts Nkedpfexabnmjx Ag Ieu

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Nsdpfxecgrkyo Ag Isku Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min Nkjdpefmck Hefx Ag Ieu dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts Optional base frame 361 euros

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t Njdjl R Nnnepfx Ag Ieku dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW Nodpfxsp Ebn Sj Ag Ieku - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: used, Year of construction: 2012, Technical details: cutting diameter: 250 mm Nkedpjymmcwsfx Ag Isu cutting range min.: 80 mm saw blade diameter: 2950 x 27 x 0,9 mm cutting range square: 220 mm cutting capacity flat: 280 x 220 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 650 kg

Condition: good (used), Year of construction: 2015, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm Nedpfx Asyk Dg Isg Isku capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC total power requirement 1.5 / 1.8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) Njdpsxaarkofx Ag Ieku - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Saw band dimensions: 2950x27x0.9 mm Nsdpfx Agoylwi Ej Ieku 2 speeds: 15-100 m/min Vice opening: 285 mm Cutting range at 90° (round): 250 mm Cutting range at 90° (square): 220 mm Cutting range at 90° (flat): 280x220 mm Cutting range at 60° (round): 120 mm Cutting range at 60° (square): 80 mm Cutting range at 60° (flat): 140x100 mm Cutting range at 45° (round): 230/200 mm Cutting range at 45° (square): 200/170 mm Cutting range at 45° (flat): 220x200/200x140 mm Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2500x2230x2050 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Njdjxdr Rtjpfx Ag Isku - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Nkodpex Hw Sqofx Ag Iju Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: used, Year of construction: 2007, MEP Shearline Flexiplus Very good condition, stored, only 1,000 hours of operation Year 2007 Nodpoymb T Dofx Ag Ioku Cutting capacity: up to 36 mm Cutting capacity: Up to 36 mm

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Table rotateable left and right Manual feed Njdpfeygin Nex Ag Ieku

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. Nodog Hzxispfx Ag Ieku MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, Bandsaw MEP Model: SHARK 330 CNC FE Year: 1996 Condition: Refurbished Cutting capacity at 0 degrees: round: 260 mm – square: 230 mm – rectangular: 330x230 mm Cutting capacity at 45 degrees left: round: 240 mm – square: 200 mm – rectangular: 230x200 mm Blade dimensions: 3150x25.4x0.9 mm Cutting speed: Slow: 36 m/min – Fast: 72 m/min Table height: 690 mm Blade motor: 1.5 kW Electro-pump motor: 0.13 kW Hydraulic power unit motor: 0.22 kW Machine dimensions: 2460x2020x1790H mm Weight: 1220 kg Overhauled Ready for delivery Nkedpfx Agjyk Unvo Iju

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Nkjdpfxowtr Iye Ag Iou Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Nkodpjykvg Hjfx Ag Isu Cutting angle: from -45° to +60° Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Nksdpfouwrv Djx Ag Iou

Condition: used, Year of construction: 2006, MEP Cobra 350 AX automatic aluminium circular saw Pneumatic horizontal clamping of stock Pneumatic vertical clamp of stock 1 line, 6 position digital display Adjustable Cutting Depth & Stop Height Can be operated manually Condition: used Round cutting range 0°: 120 mm. Square cutting range 0°: 105 x 105 mm. Nodpfxeww Ay Ie Ag Ijku Flat cutting range 0°:180 x 170 mm. Cutting range full square material 0°:80 mm. 45° square cutting range: 110 x 95 mm. 45° flat cutting range: 160 / 35 – 180 / 20 mm. 45° cutting range with cutting head in left position with solid round/square/flat cutting disc diameter: 50/ 50/ 160 x 35 mm. Nr. 02 speed: 1700 / 3400 rpm Vice opening:180 mm. Saw blade diameter : 350 mm Drive power 3.5 Kw. Dimensions: 2000 x 1000 x 1750 mm. Weight: 600 Kg Accessories/options: manuals rollers for long workpieces

Condition: new, Model Name Nedpfx Agogvkbcj Isku Shark 282 CCS

Condition: new, Model Name Nodpjgvkglsfx Ag Ijku Shark 281 SXI evo

Condition: new, Model Name Nksdegvkchopfx Ag Isu Shark 281 CCS

Condition: new, Model Name Njdel H Dydepfx Ag Ieku PH 261-1 HB

Condition: new, Model Name Nkodpjl Sva Iefx Ag Iju SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Shark 332-1 SXI evo Nkjdpfx Agegvkafs Isu